u-boot.git/include/configs, branch v2019.04 Unnamed repository; edit this file 'description' to name the repository. Merge tag 'u-boot-imx-20190405' of git://git.denx.de/u-boot-imx 2019-04-05T13:09:56+00:00 Tom Rini trini@konsulko.com 2019-04-05T13:09:56+00:00 0e62d5b2abb69ddc9e58215e2d8dfa5d33996b8a Fixes for 2019.04 - fix bashism for MX8 - fix ethernet for MX53 - fix docs for i.MX8 
Fixes for 2019.04

	- fix bashism for MX8
	- fix ethernet for MX53
	- fix docs for i.MX8
cosmetic: Remove not needed string from kp_imx53.h config 2019-04-02T11:44:18+00:00 Lukasz Majewski lukma@denx.de 2019-04-01T14:00:04+00:00 8e2b1f2251b4935f6e1b6619ab7421e0600e259c Signed-off-by: Lukasz Majewski <lukma@denx.de> 
Signed-off-by: Lukasz Majewski <lukma@denx.de>
cosmetic: config: Remove empty #ifdefs 2019-04-02T11:44:18+00:00 Lukasz Majewski lukma@denx.de 2019-04-01T14:00:03+00:00 f73c09e735bffc2b229bd20de6ca41e4d7efbc1d After running tools/moveconfig.py it turned out that for various boards there are an empty #ifdef statements. Remove them to clean u-boot source code. Signed-off-by: Lukasz Majewski <lukma@denx.de> 
After running tools/moveconfig.py it turned out that for various boards
there are an empty #ifdef statements.

Remove them to clean u-boot source code.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Merge branch 'master' of git://git.denx.de/u-boot-sh 2019-04-02T03:30:00+00:00 Tom Rini trini@konsulko.com 2019-04-02T03:30:00+00:00 da06f9a1850b074904966121b125c000ffc07b2f Minor fixes for the Alt board and PHY use on Gen2. 
Minor fixes for the Alt board and PHY use on Gen2.
ARM: imx6q_logic: Enable UUID support 2019-03-31T18:00:57+00:00 Adam Ford aford173@gmail.com 2019-03-03T22:22:45+00:00 b7de88cd5cb8c213fb158b37fcf0662c1d2332cd With UUID support, the root can now point to UUID. This makes swiching between mmc 0 and mmc 1 easier by simplying changing mmcdev between 0 and 1. From there, the scripts handle the rest. Signed-off-by: Adam Ford <aford173@gmail.com> 
With UUID support, the root can now point to UUID.  This makes
swiching between mmc 0 and mmc 1 easier by simplying changing
mmcdev between 0 and 1.  From there, the scripts handle the rest.

Signed-off-by: Adam Ford <aford173@gmail.com>
Merge branch 'master' of git://git.denx.de/u-boot 2019-03-31T17:54:10+00:00 Stefano Babic sbabic@denx.de 2019-03-31T17:54:10+00:00 66c433ed4342e5761ee9b048c85fe47d31130b2e Signed-off-by: Stefano Babic <sbabic@denx.de> 
Signed-off-by: Stefano Babic <sbabic@denx.de>
ARM: rmobile: rcar-gen2: Activate bootm_size 2019-03-30T06:48:05+00:00 Marek Vasut marek.vasut+renesas@gmail.com 2019-03-30T06:43:55+00:00 0fe668d7d939c3467c856b5aef21e67f8f48383b Commit d245059ff797 ("ARM: rmobile: rcar-gen3: Activate bootm_size") only fixed the superfluous CONFIG_SYS_BOOTMAPSZ for R-Car Gen3, even though it listed all affected boards. Apply the same fix to Gen2. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Fixes: d245059ff797 ("ARM: rmobile: rcar-gen3: Activate bootm_size") Cc: Eugeniu Rosca <erosca@de.adit-jv.com> 
Commit d245059ff797 ("ARM: rmobile: rcar-gen3: Activate bootm_size")
only fixed the superfluous CONFIG_SYS_BOOTMAPSZ for R-Car Gen3, even
though it listed all affected boards. Apply the same fix to Gen2.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Fixes: d245059ff797 ("ARM: rmobile: rcar-gen3: Activate bootm_size")
Cc: Eugeniu Rosca <erosca@de.adit-jv.com>
configs: ti: Move FIT image load address to avoid overwrite 2019-03-29T14:53:18+00:00 Andrew F. Davis afd@ti.com 2019-03-26T15:12:01+00:00 1abddd933f10fba3a11b278080568e7d7aa0e62d The FIT image is loaded to 0x8700_0000 followed by extracting from that several large images also into the 0x8x00_0000 range. Large images can end up overwriting the FIT image as it is being extracted from. Move the FIT load address clear out to 0x9000_0000, this will require a board to have at least 256MB of DRAM, if less then more careful planning will be required for that platform. Signed-off-by: Andrew F. Davis <afd@ti.com> 
The FIT image is loaded to 0x8700_0000 followed by extracting from that
several large images also into the 0x8x00_0000 range. Large images
can end up overwriting the FIT image as it is being extracted from.
Move the FIT load address clear out to 0x9000_0000, this will require
a board to have at least 256MB of DRAM, if less then more careful
planning will be required for that platform.

Signed-off-by: Andrew F. Davis <afd@ti.com>
ARC: AXS10x: drop NAND support 2019-03-28T07:42:47+00:00 Eugeniy Paltsev eugeniy.paltsev@synopsys.com 2019-03-27T13:53:43+00:00 4f5e552d95bb83adc439056dc387153d65685cb6 On AXS10x boards we have non-standard NAND controller which was never really used a lot as there're other much more convenient [as they are standard & removable] persistent media like SD-card and USB mass storage. Moreover after recent changes we face with some NAND controller runtime issues. So instead of keeping support of yet another non-standard peripheral we're dropping its support for good. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> 
On AXS10x boards we have non-standard NAND controller
which was never really used a lot as there're other much more
convenient [as they are standard & removable] persistent media
like SD-card and USB mass storage.

Moreover after recent changes we face with some NAND controller
runtime issues. So instead of keeping support of yet another
non-standard peripheral we're dropping its support for good.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Convert CONFIG_ENV_SPI_* to Kconfig 2019-03-25T21:36:59+00:00 Patrick Delaunay patrick.delaunay@st.com 2019-02-27T14:20:38+00:00 abe66b1b5decf9cc2fb5daad42c9e870e5b99b67 This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE Most of time these value are not needed, CONFIG_SF_DEFAULT with same value is used, so I introduced CONFIG_USE_ENV_SPI_* to force the associated value for the environment. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> 
This converts the following to Kconfig:
  CONFIG_ENV_SPI_BUS
  CONFIG_ENV_SPI_CS
  CONFIG_ENV_SPI_MAX_HZ
  CONFIG_ENV_SPI_MODE

Most of time these value are not needed, CONFIG_SF_DEFAULT
with same value is used, so I introduced CONFIG_USE_ENV_SPI_*
to force the associated value for the environment.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>