u-boot.git/include/configs, branch v2020.04 Unnamed repository; edit this file 'description' to name the repository. mips: vcoreiii: Ajust CONFIG_SYS_MEMTEST_END 2020-04-09T16:55:59+00:00 Lars Povlsen lars.povlsen@microchip.com 2020-02-06T09:43:18+00:00 ea148789318c8152acb0a3974d4a8342dbd6b901 This patch ajust CONFIG_SYS_MEMTEST_END for vcoreiii-based systems to avoid overwriting the relocated u-boot. The former setting was too agressive with networking etc. enabled on some platforms. Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> 
This patch ajust CONFIG_SYS_MEMTEST_END for vcoreiii-based systems to
avoid overwriting the relocated u-boot. The former setting was too
agressive with networking etc. enabled on some platforms.

Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
mx7dsabre: Fix ramdisk_addr* for distro boot 2020-04-07T08:43:25+00:00 Jan Kiszka jan.kiszka@siemens.com 2020-03-16T11:50:09+00:00 c94f405ce993ce57d9577bca43cebe54689f4f8a Overlapped with fdt_addr*, thus corrupted the latter when using both. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> 
Overlapped with fdt_addr*, thus corrupted the latter when using both.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-tegra 2020-04-03T20:05:46+00:00 Tom Rini trini@konsulko.com 2020-04-03T20:05:46+00:00 60f1cc529ccc364e8374945a06ff2f7a2c54fb1e - Add support for Jetson Nano, plus miscellaneous other fixes found during Nano bringup. - Add Igor's update_uboot wrapper patches. 
- Add support for Jetson Nano, plus miscellaneous other fixes found
  during Nano bringup.
- Add Igor's update_uboot wrapper patches.
ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support 2020-04-02T21:30:02+00:00 Tom Warren twarren@nvidia.com 2020-02-28T23:17:07+00:00 7c02bc9649f6d3afd272ac4a94b280495473834c The Jetson Nano Developer Kit is a Tegra X1-based development board. It is similar to Jetson TX1 but it is not pin compatible. It features 4GB of LPDDR4, a SPI NOR flash for early boot firmware and an SD card slot used for storage. HDMI 2.0 or DP 1.2 are available for display, four USB ports (3 USB 2.0 and 1 USB 3.0) can be used to attach a variety of peripherals and a PCI Ethernet controller provides onboard network connectivity. NVMe support has also been added. Env save is at the end of QSPI (4MB-8K). A 40-pin header on the board can be used to extend the capabilities and exposed interfaces of the Jetson Nano. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> 
The Jetson Nano Developer Kit is a Tegra X1-based development board. It
is similar to Jetson TX1 but it is not pin compatible. It features 4GB
of LPDDR4, a SPI NOR flash for early boot firmware and an SD card slot
used for storage.

HDMI 2.0 or DP 1.2 are available for display, four USB ports (3 USB 2.0
and 1 USB 3.0) can be used to attach a variety of peripherals and a PCI
Ethernet controller provides onboard network connectivity. NVMe support
has also been added. Env save is at the end of QSPI (4MB-8K).

A 40-pin header on the board can be used to extend the capabilities and
exposed interfaces of the Jetson Nano.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
t210: Adjust ramdisk_addr_r/fdt_addr_r to allow for large kernels 2020-04-02T21:30:02+00:00 Tom Warren twarren@nvidia.com 2020-03-17T00:01:43+00:00 5dc1dc804d0ffcdb9ddfdf37f8446a9b41f38f78 The L4T kernel is 32MB+, and can overwrite the ramdisk/fdt loaded from extlinux.conf. Adjust the load addresses to fix this for now. Using the calculated_env addresses table from T186 U-Boot is a better fix, but it isn't working correctly on T210 U-Boot right now, so this will do until I can fix it. Signed-off-by: Tom Warren <twarren@nvidia.com> 
The L4T kernel is 32MB+, and can overwrite the ramdisk/fdt loaded
from extlinux.conf. Adjust the load addresses to fix this for now.
Using the calculated_env addresses table from T186 U-Boot is a
better fix, but it isn't working correctly on T210 U-Boot right now,
so this will do until I can fix it.

Signed-off-by: Tom Warren <twarren@nvidia.com>
colibri_t30: add update_uboot wrapper 2020-04-02T21:30:00+00:00 Igor Opaniuk igor.opaniuk@toradex.com 2020-03-27T10:15:48+00:00 b308ffb0bf2171fe32aa6028340f9f5dad46ff8f Add universal update_uboot wrapper that helps to update U-Boot image on internal storage. Create an proper tegra image: $ cbootimage -s tegra30 colibri_t30.img.cfg colibri_t30.img Flash in U-boot shell: > tftpboot ${loadaddr} ${board_name}/${board_name}.img > run update_uboot Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> 
Add universal update_uboot wrapper that helps to update
U-Boot image on internal storage.

Create an proper tegra image:
$ cbootimage -s tegra30 colibri_t30.img.cfg colibri_t30.img

Flash in U-boot shell:
> tftpboot ${loadaddr} ${board_name}/${board_name}.img
> run update_uboot

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
colibri_t20: add update_uboot wrapper 2020-04-02T21:30:00+00:00 Igor Opaniuk igor.opaniuk@toradex.com 2020-03-27T10:15:47+00:00 a63dd9840096df8f8bb6d36981505ba7c42350d3 Add universal update_uboot wrapper that helps to update U-Boot image on internal storage(NAND). Create an proper tegra image: $ cbootimage -s tegra20 colibri_t20-512-v12-nand.img.cfg colibri_t20.img Flash in U-boot shell: > tftpboot ${loadaddr} ${board_name}/${board_name}.img > run update_uboot Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> 
Add universal update_uboot wrapper that helps to update
U-Boot image on internal storage(NAND).

Create an proper tegra image:
$ cbootimage -s tegra20 colibri_t20-512-v12-nand.img.cfg colibri_t20.img

Flash in U-boot shell:
> tftpboot ${loadaddr} ${board_name}/${board_name}.img
> run update_uboot

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
apalis_t30: add update_uboot wrapper 2020-04-02T21:30:00+00:00 Igor Opaniuk igor.opaniuk@toradex.com 2020-03-27T10:15:46+00:00 195b48367fcb01ee0578f56615c2087ff756bbf2 Add universal update_uboot wrapper that helps to update U-Boot image on internal storage. Create an proper tegra image: $ cbootimage -s tegra30 apalis_t30.img.cfg apalis_t30.img Flash in U-boot shell: > tftpboot ${loadaddr} ${board_name}/${board_name}.img > run update_uboot Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> 
Add universal update_uboot wrapper that helps to update
U-Boot image on internal storage.

Create an proper tegra image:
$ cbootimage -s tegra30 apalis_t30.img.cfg apalis_t30.img

Flash in U-boot shell:
> tftpboot ${loadaddr} ${board_name}/${board_name}.img
> run update_uboot

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
apalis-tk1: add update_uboot wrapper 2020-04-02T21:30:00+00:00 Igor Opaniuk igor.opaniuk@toradex.com 2020-03-27T10:15:45+00:00 c9d1ff70e236a0d78ac07bdbadb5d6d7e8896361 Add universal update_uboot wrapper that helps to update U-Boot image on internal storage. Create an proper tegra image: $ cbootimage -s tegra124 apalis-tk1.img.cfg apalis-tk1.img Flash in U-boot shell: > tftpboot ${loadaddr} ${board_name}/${board_name}.img > run update_uboot Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> 
Add universal update_uboot wrapper that helps to update
U-Boot image on internal storage.

Create an proper tegra image:
$ cbootimage -s tegra124 apalis-tk1.img.cfg apalis-tk1.img

Flash in U-boot shell:
> tftpboot ${loadaddr} ${board_name}/${board_name}.img
> run update_uboot

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
rockchip: Enable HDMI output on rk3399 board w/ HDMI 2020-04-02T13:50:25+00:00 Jagan Teki jagan@amarulasolutions.com 2020-04-02T11:41:24+00:00 9778edae5576e0a43a13387f9081ce11ef633025 Enable config options and console setting to respective rk3399 board for HDMI output. Boards supported and tested on this patch are: - NanoPc T4 - NanoPi M4 - NanoPi Neo4 - ROC-RK3399-PC - Rock960 Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> 
Enable config options and console setting to respective
rk3399 board for HDMI output.

Boards supported and tested on this patch are:
- NanoPc T4
- NanoPi M4
- NanoPi Neo4
- ROC-RK3399-PC
- Rock960

Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>