u-boot.git/include/configs, branch v2020.10

board: tbs2910: Use recommended distroboot addresses

2020-10-02T12:42:36+00:00

According to doc/README.distro fdt_addr must not be set when DTB is not
available from hardware. So remove this entry.

Use address 32MB above the start of DRAM for kernel_addr_r. This way
we likely can avoid the self-relocation of the compressed kernel image
before it decompresses to offset 0x8000 from start of DRAM.

Use address 128MB above the start of DRAM for fdt_addr_r, since this is
the maximum location for the end of the kernel. So we avoid overwriting
the DTB.

Use 512k above that for ramdisk_addr_r. This should be enough for the
DTB, rest of DRAM can be used for initrd.

Place boot script / extlinux.conf at offset 0 / 1MB from start of DRAM.
This space is available for processing in U-Boot.

Signed-off-by: Soeren Moch 
Reviewed-by: Fabio Estevam 
Reviewed-by: Tom Rini

Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq

2020-09-25T16:55:06+00:00

- Bug fixes related to PCIe, pfe, xfi, gpio, reset, vid, env, and usb on
  layerscape products

lx2160: Correct sd_boot environment variable

2020-09-24T15:27:32+00:00

Signed-off-by: Meenakshi Aggarwal 
Reviewed-by: Priyanka Jain

arm64: a37xx: increase CONFIG_SYS_BOOTM_LEN to 64MB

2020-09-24T08:13:22+00:00

Increase max gunzip size, required for booting itb recovery images on
uDPU.

Signed-off-by: Vladimir Vid 
[a.heider: adapt to mainline]
Signed-off-by: Andre Heider

ls1028a: use default scan_dev_for_boot

2020-09-23T14:03:43+00:00

scan_dev_for_efi is supposed to be called from scan_dev_for_boot.
However this call is missing for ls1028ardb and ls1028aqds boards. As
a result EFI boot doesn’t work. Fix this issue by removing custom
definition of scan_dev_for_boot and use the default definition
instead.

Signed-off-by: Mian Yousaf Kaukab 
Reviewed-by: andy.tang@nxp.com
Reviewed-by: Priyanka Jain

mips: vocore2: fix various issues

2020-09-22T22:14:56+00:00

- fix SPL image generation
- fix incorrect console output
- increase malloc_f and malloc_r space to fix LZMA decompression errors
- increase SPI flash clock

Signed-off-by: Mauro Condarelli 
[squashed to one patch, fix commit subject and description]
Signed-off-by: Daniel Schwierzeck

x86: edison: Move config SYS_MALLOC_LEN to Kconfig

2020-09-21T01:47:24+00:00

This patch moves the the config SYS_MALLOC_LEN to Kconfig
as it is already done for zynq arch in commit 01aa5b8f0503
("Kconfig: Move config SYS_MALLOC_LEN to Kconfig for zynq").

Signed-off-by: Andy Shevchenko 
Reviewed-by: Simon Glass 
Reviewed-by: Bin Meng

apalis_imx6: provide fdtfile in env instead of setting it in runtime

2020-09-17T12:39:09+00:00

Provide fdtfile value in default env instead of setting
it dynamically in runtime.

Fixes: 85cb2bc686("apalis/colibri imx6: provide proper fdtfile value")
Signed-off-by: Igor Opaniuk

colibri_imx6: provide fdtfile in env instead of setting it in runtime

2020-09-17T12:39:09+00:00

Provide fdtfile value in default env instead of setting
it dynamically in runtime.

Fixes: 85cb2bc686("apalis/colibri imx6: provide proper fdtfile value")
Signed-off-by: Igor Opaniuk

colibri_imx7: use preboot for fdtfile evaluation

2020-09-17T12:39:09+00:00

Enable and set preboot var with fdtfile evaluation.
preboot will be checked and run immediately before starting the
CONFIG_BOOTDELAY countdown and/or running the auto-boot command resp.
entering interactive mode.

This provides possibility to use different boot cmds in interactive mode
without manual setting fdtfile value, as it it's already evaluated
before entering interactive mode.

Fixes: a62c60610f("colibri_imx7_emmc: add Colibri iMX7D 1GB (eMMC) module support")
Signed-off-by: Igor Opaniuk