Currently it is not possible to boot Linux from the SD card
by default.

Make the necessary adjustments to allow it.

Reported-by: Peter Bergin <peter@berginkonsult.se>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Andrey Zhizhikin <andrey.z@gmail.com> # imx8mn_ddr4_evk
Reviewed-by: Peng Fan <peng.fan@nxp.com>

LS1028A-QDS has CONFIG_SPI_FLASH_SST and CONFIG_SPI_FLASH_EON defines
present in header. Move these entries from header to defconfigs.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>

It is now safe to remove Flexspi configs NXP_FSPI_FLASH_SIZE and
NXP_FSPI_FLASH_NUM options from headers as they are no longer used by
driver anymore.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>

- Fix boot for da850-evm and omap3_logic
- Optimize SPL size for am65x boards

- Add WATCHDOG_RESET() in MTD framework and STM32 QSPI driver
- stm32mp1_trusted_defconfig rely on SCMI support
- Remove the nand MTD configuration for NOR boot in stm32mp1 board
- STM32programmer update
- Bsec: manage clock when present in device tree
- stm32mp15: move bootdelay configuration in defconfig
- Update for stm32 dsi and dw_mipi_dsi
- STM32 MCU's cleanup
- Fix compilation issue depending on SYS_DCACHE_OFF and SYS_ICACHE_OFF flags
- Update stm32mp1 doc

Current BSS allocation of SPL is as below:
$ size spl/u-boot-spl
   text	   data	    bss	    dec	    hex	filename
 132369	   7852	   1496	 141717	  22995	spl/u-boot-spl

But 20KB is allocated currently for BSS. Reduce it to 3KB and save some
space for stack.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

In a previous attempt to unify config options and remove items
from the whitelist file, SPL items were moved into a section
enabled with CONFIG_SPL_BUILD.  Unfortunately, SPL_PAD_TO
is referenced at the head Makefile and uses this define
to create padding of the output file.  When it was moved
to CONFIG_SPL_BUILD, it caused boot errors with devices
that are not booting from NOR.  Fix the boot issues by moving
SPL_PAD_TO out so it's always.

Fixes: 7bb33e4684aa ("ARM: da850-evm: Unify config options with Kconfig")
Signed-off-by: Adam Ford <aford173@gmail.com>

The STM32MP15 boards have no reason to configure bootdelay in stm32mp1.h
as it is already done with CONFIG_BOOTDELAY (default = 2) and in
include/env_default.h.

This patch allows configuration for customers which reuse stm32mp1.h
and reduce the size of the default environment.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

- button: adc: fix treshold typo
- configs: meson64: add fdtoverlay_addr_r

In order to support loading FTD Overlays when booting with the pxe
command (or extlinux.conf), supported with [1], add the missing
fdtoverlay_addr_r used to load the overlay before applying it to
the FDT loaded at fdt_addr_r.

[1] https://patchwork.ozlabs.org/project/uboot/patch/20210120085453.2783678-1-narmstrong@baylibre.com/

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>