u-boot.git/include/configs, branch v2021.07-rc3

riscv: Enable AI ram on K210

2021-05-14T08:20:49Z

We just need to initialize all the clocks pre-reloc. The clock driver creates a bunch of devices, so we need to increase the pre-reloc malloc arena. Signed-off-by: Sean Anderson

Merge tag 'ti-v2021.07-rc3' of https://source.denx.de/u-boot/custodians/u-boot-ti

2021-05-12T14:07:21Z

- Initial support for AM64 EVM and SK - K3 DDR driver unification for J7 and AM64 platforms. - Minor fixes for TI clock driver

include: configs: Update env for selecting right dtb

2021-05-12T11:02:44Z

Now that single defconfig can be used for booting AM64 EVM and SK, default device tree will not work for selecting dtb for kernel. Update the env to select right dtb based on eeprom. Signed-off-by: Lokesh Vutla

include: configs: am64x_evm: Optimize size of SPL BSS

2021-05-12T11:02:44Z

Current BSS allocation of SPL is as below: size spl/u-boot-spl text data bss dec hex filename 144572 5484 1752 151808 25100 spl/u-boot-spl But 20KB is allocated currently for BSS. Reduce it to 4KB and save some space for stack. Signed-off-by: Lokesh Vutla

include: configs: am64x: Avoid overlap of BSS and stack area

2021-05-12T11:02:44Z

Avoid R5 SPL stack writing into ROM index table. Re-use the same space for storing EEPROM data. Signed-off-by: Lokesh Vutla

board: ti: am64x: Add board support for am64x evm

2021-05-12T10:57:57Z

Add board specific initialization for am64x based boards. Signed-off-by: Dave Gerlach

ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM

2021-05-02T10:46:54Z

Supported peripherals: Ethernet, eMMC, Serial. U-Boot SPL 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) Normal Boot Trying to boot from MMC2 U-Boot 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) CPU: Freescale i.MX8MQ rev2.1 at 1000 MHz Reset cause: POR Model: Ronetix iMX8M-CM SoM DRAM: 1 GiB WDT: Started with servicing (60s timeout) MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 (eth0) using random MAC address - 42:0d:e7:78:da:53 eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 u-boot=> Signed-off-by: Ilko Iliev

imx: Add support for Ronetix's iMX7-CM board

2021-05-02T10:46:54Z

Console boot log: U-Boot SPL 2021.04-00836-ga6232e065d-dirty (Apr 16 2021 - 15:16:35 +0200) Trying to boot from MMC1 U-Boot 2021.04-00836-ga6232e065d-dirty (Apr 16 2021 - 15:16:35 +0200) CPU: Freescale i.MX7D rev1.3 1000 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 44C Reset cause: POR Model: Ronetix iMX7-CM Board Board: iMX7-CM DRAM: 512 MiB PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 0, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 (eth0) using random MAC address - fe:be:37:01:5a:3f eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 Signed-off-by: Ilko Iliev

arm: imx8m: add support for Compulab iot-gate-imx8 (imx8mm-cl-iot-gate)

2021-05-02T10:46:54Z

Add initial support for Compulab iot-gate-imx8 board (imx8mm-cl-iot-gate). The initial support includes: - MMC - eMMC - I2C - FEC - Serial console Signed-off-by: Kirill Kapranov Signed-off-by: Uri Mashiach Signed-off-by: Valentin Raevsky Signed-off-by: Ying-Chun Liu (PaulLiu) Cc: Peter Robinson

board: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit

2021-05-02T10:46:54Z

Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board. Genaral features: - LCD 7" C.Touch - microSD slot - Ethernet 1Gb - Wifi/BT - 2x LVDS Full HD interfaces - 3x USB 2.0 - 1x USB 3.0 - HDMI Out - Mini PCIe - MIPI CSI - 2x CAN - Audio Out i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam. i.Core MX8M Mini needs to mount on top of this Evaluation board for creating complete i.Core MX8M Mini EDIMM2.2 Starter Kit. Linux dts commit details: commit <051c08eea682> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit") Add support for it. Signed-off-by: Jagan Teki