u-boot.git/include/configs, branch v2023.04-rc4

board: rockchip: add Radxa ROCK5B Rk3588 board

2023-02-28T10:07:29Z

ROCK 5B is a Rockchip RK3588 based SBC (Single Board Computer) by Radxa. There are tree variants depending on the DRAM size : 4G, 8G and 16G. Specification: Rockchip Rk3588 SoC 4x ARM Cortex-A76, 4x ARM Cortex-A55 4/8/16GB memory LPDDR4x Mali G610MC4 GPU MIPI CSI 2 multiple lanes connector eMMC module connector uSD slot (up to 128GB) 2x USB 2.0, 2x USB 3.0 2x HDMI output, 1x HDMI input Ethernet port 40-pin IO header including UART, SPI, I2C and 5V DC power in USB PD over USB Type-C Size: 85mm x 54mm Kernel commits: a1d3281450ab ("arm64: dts: rockchip: Add rock-5b board") 6fb13f888f2a ("arm64: dts: rockchip: Update sdhci alias for rock-5b") Signed-off-by: Eugen Hristev Reviewed-by: Kever Yang

rockchip: rk3568: Read cpuid from otp

2023-02-28T10:07:28Z

The cpuid on RK3568 is located at 0xa instead of 0x7 as all other SoCs. Add and use a CFG_CPUID_OFFSET to define this offset. Signed-off-by: Jonas Karlman Reviewed-by: Kever Yang

board: rockchip: Add Edgeble Neural Compute Module 6

2023-02-28T10:07:28Z

Neural Compute Module 6(Neu2) is a 96boards SoM-CB compute module based on Rockchip RK3588 from Edgeble AI. General features: - Rockchip RK3588 - up to 32GB LPDDR4x - up to 128GB eMMC - 2x MIPI CSI2 FPC On module WiFi6/BT5 is available in the following Neu6 variants. Neural Compute Module 6(Neu6) IO board is an industrial form factor ready-to-use IO board from Edgeble AI. IO board offers plenty of peripherals and connectivity options and this patch enables basic eMMC and UART which is enough to successfully boot Linux. Neu6 needs to mount on top of this IO board in order to create a complete Edgeble Neural Compute Module 6(Neu6) IO platform. Boot log for the record, DDR Version V1.08 20220617 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB Manufacturer ID:0x6 CH0 RX Vref:31.7%, TX Vref:21.8%,21.8% CH1 RX Vref:30.7%, TX Vref:22.8%,23.8% CH2 RX Vref:30.7%, TX Vref:22.8%,22.8% CH3 RX Vref:30.7%, TX Vref:21.8%,21.8% change to F1: 528MHz change to F2: 1068MHz change to F3: 1560MHz change to F0: 2112MHz out U-Boot SPL 2023.01-00952-g1d1785a516-dirty (Jan 30 2023 - 19:53:55 +0530) Trying to boot from MMC1 INFO: Preloader serial: 2 NOTICE: BL31: v2.3():v2.3-391-g856309329:derrick.huang NOTICE: BL31: Built : 14:15:50, Jul 18 2022 INFO: ext 32k is not valid INFO: GICv3 without legacy support detected. INFO: ARM GICv3 driver initialized in EL3 INFO: system boots from cpu-hwid-0 INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001 INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz INFO: BL31: Initialising Exception Handling Framework INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0xa00000 INFO: SPSR = 0x3c9 U-Boot 2023.01-00952-g1d1785a516-dirty (Jan 30 2023 - 19:53:55 +0530) Model: Edgeble Neu6A IO Board DRAM: 7.5 GiB (effective 3.7 GiB) Core: 71 devices, 15 uclasses, devicetree: separate MMC: mmc@fe2c0000: 0 Loading Environment from nowhere... OK In: serial@feb50000 Out: serial@feb50000 Err: serial@feb50000 Model: Edgeble Neu6A IO Board Net: No ethernet found. Hit any key to stop autoboot: 0 => Add support for Edgeble Neu6 Model A IO Board. Signed-off-by: Jagan Teki Reviewed-by: Kever Yang

arm: rockchip: Add RK3588 arch core support

2023-02-28T10:07:28Z

The Rockchip RK3588 is a ARM-based SoC with quad-core Cortex-A76 and quad-core Cortex-A55 including NEON and GPU, 6TOPS NPU, Mali-G610 MP4, HDMI Out, HDMI In, DP, eDP, MIPI DSI, MIPI CSI2, LPDDR4/4X/5, eMMC5.1, SD3.0/MMC4.5, USB OTG 3.0, Type-C, USB 2.0, PCIe 3.0, SATA 3, Ethernet, SDIO3.0 I2C, UART, SPI, GPIO and PWM. Add arch core support for it. Signed-off-by: Jagan Teki Signed-off-by: Kever Yang

include: rk3328: Add default env for compressed kernel images

2023-02-28T10:07:26Z

Add default memory addresses for kernel_comp_addr_r and kernel_comp_size to enable booting from a compressed kernel image. This area is temporarily used to decompress the kernel image on-the-fly. Signed-off-by: Christopher Obbard Reviewed-by: Kever Yang

socfpga: chameleonv3: Move environment to a text file

2023-02-21T23:28:39Z

Move the environment to an easily editable text file in the boot partition Signed-off-by: Paweł Anikiel Reviewed-by: Simon Glass

riscv: Rename Andes cpu and board names

2023-02-17T11:07:48Z

The current ae350-related defconfigs could also support newer Andes CPU IP, so modify the names of CPU from ax25 to andesv5, and board name from ax25-ae350 to ae350. Signed-off-by: Leo Yu-Chi Liang Reviewed-by: Yu Chien Peter Lin Reviewed-by: Rick Chen

arm: mvebu: Add support for Synology DS116 (Armada 385)

2023-02-13T09:14:50Z

Synology DS116 is a NAS based on Marvell Armada 385 SoC. Board Specification: - Marvel MV88F6820 Dual Core at 1.8GHz - 1 GiB DDR3 RAM - 8MB Macronix mx25l6405d SPI flash - I2C - 2x USB 3.0 - 1x GBE LAN port (PHY: Marvell 88E1510) - 1x SATA (6 Gbps) - 3x LED - PIC16F1829 (connected to uart1) - GPIO fan - serial console Note that this patch depends on the add-support for Thecus N2350 patch: https://patchwork.ozlabs.org/project/uboot/patch/20230201231306.7010-1-mibodhi@gmail.com/ Signed-off-by: Tony Dinh

arm: mvebu: Add support for Thecus N2350 (Armada 385) board

2023-02-13T09:14:50Z

Thecus N2350 is a NAS based on Marvell Armada 385 SoC. Specification: - Processor: Marvel MV88F6820 Dual Core at 1GHz - 1 GiB DDR4 RAM - 4MB Macronix mx25l3205d SPI flash - 512MB Hynix H27U4G8F2DTR-BC NAND flash - I2C - 2x USB 3.0 - 1x GBE LAN port (PHY: Marvell 88E1510) - 2x SATA (hot swap slots) - 3x buttons - 10x LEDS - serial console Signed-off-by: Tony Dinh Reviewed-by: Stefan Roese

Merge branch 'for-2023.04' of https://source.denx.de/u-boot/custodians/u-boot-mpc8xx

2023-02-12T20:25:09Z

- A fix for a long standing bug that has been exposed by commit 50128aeb0f8 ("cyclic: get rid of cyclic_init()") preventing 8xx boards from booting since u-boot 2023.01 - A GPIO driver for powerpc 8xx chip - Fixup for powerpc 8xx SPI driver - A new powerpc 8xx board - The two devices having that board.