u-boot.git/include/configs, branch v2025.01-rc3

Merge branch 'qcom-main' of https://source.denx.de/u-boot/custodians/u-boot-snapdragon

2024-11-20T17:55:24Z

CI: https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/pipelines/23474 - UFS support is enabled for SC7280 and SM8150 platforms. - Qualcomm dt-bindings headers are all dropped in favour of dts/upstream. - The SMMU driver now correctly handles stream ID 0 and is disabled in EL2. - Initial support for capsule updates (using the new dynamic UUIDs) is added for the RB3 Gen 2 board alongside a new SCSI backend for DFU. - CONFIG_PINCONF is enabled in qcom_defconfig. - The vqmmc supply is now enabled for sdcard support on boards that need it. - A quirk is added for reading GPIOs on the PM8550 PMIC

mach-snapdragon: implement capsule update support

2024-11-20T16:57:58Z

Qualcomm boards flash U-Boot a variety of partitions, implement support for determining which slot U-Boot is running from, finding the correct partition for that slot and configuring the appropriate DFU string. Initially, we only support the RB3 Gen 2 where U-Boot is flashed to the UEFI partition, and ignore handling of slots. In the future we will additionally support booting U-Boot from other partitions (e.g. boot) and correct handling for A/B. Reviewed-by: Neil Armstrong Acked-by: Ilias Apalodimas Signed-off-by: Caleb Connolly

Merge tag 'xilinx-for-v2025.01-rc3-v2' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

2024-11-19T18:58:05Z

AMD/Xilinx changes for v2025.01-rc3: - microblaze: - Disable JFFS2 - fpga: - pass compatible flag to fpga_load() - zynqmp: - SOM RTC fix - SC(system controller) PMW polarity fix - Fix ram_top calculation with introducing XILINX_MINI - Fix RPU release command - versal: - Enable capsule update - Enable soft reset and Micron octal flashes - xilinx: - Align Kconfig regarding SPI_STACKED_PARALLEL - bootcount: - Add new zynqmp driver

microblaze: Disable JFFS2 support

2024-11-19T14:57:31Z

JFFS2 is not maintained for quite a long time and none should be using it. Please use other filesystems for flashes like UBIFS instead. Also remove jffs to MTD map but MTD map is for example that's why it won't affect anything. Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/a8239acee8886229fdbff66142c46d522e3fe851.1731659933.git.michal.simek@amd.com

ARM: stm32: Add optional manufacturing environment to DH STM32MP15xx DHSOM

2024-11-12T14:18:10Z

Add manufacturing environment into STM32MP15xx DH electronics DHSOM configuration. This environment is part of every board build, but only takes effect on systems booted with the dh,stm32mp15xx-dhcor-testbench device tree, i.e. systems populated with factory build of U-Boot. Signed-off-by: Marek Vasut Reviewed-by: Patrick Delaunay

Merge tag 'u-boot-rockchip-20241111' of https://source.denx.de/u-boot/custodians/u-boot-rockchip

2024-11-11T13:25:25Z

CI: https://source.denx.de/u-boot/custodians/u-boot-rockchip/-/pipelines/23280 - Add board: rk3328: FriendlyElec NanoPi R2S Plus rk3568: Qnap TS433 rk3588: Cool Pi CM5 GenBook - Move rk3399_force_power_on_reset to TPL for puma board;

board: rockchip: Add support for rk3588 GenBook

2024-11-11T07:14:14Z

Add support for Cool Pi GenBook, it works as a carrier board connect with CM5 SOM. Specification: - Rockchip RK3588 - LPDDR5X 8/32 GB - eMMC 64 GB - HDMI Type A out x 1 - USB 3.0 Host x 1 - USB-C 3.0 with DisplayPort AltMode - PCIE M.2 E Key for RTL8852BE Wireless connection - PCIE M.2 M Key for NVME connection - eDP panel with 1920x1080 Tested by Armbian boot on USB disk. Change-Id: I4d9b8572dc7c400077dde666633f3fea1b47dd03 Signed-off-by: Andy Yan Reviewed-by: Kever Yang

rockchip: Make it possible to define per board boot_targets

2024-11-11T07:14:14Z

Some board may want to have a different boot priority(a laptop may want to usb has the highest boot priority for third-part os installation). So let the board can define it's own boot_targets. Signed-off-by: Andy Yan Reviewed-by: Kever Yang

board: rockchip: add support for Qnap TS433 devices

2024-11-11T07:14:14Z

The Qnap TS433 is a 4-bay NAS based around the RK3568. Two SATA bays are connected to the RK3568's own SATA controllers while the other two are connected to a JMicron SATA controller living on the PCIe bus. It provides one 2.5Gb and one 1Gb ethernet port as well as 3 usb ports. Signed-off-by: Heiko Stuebner Reviewed-by: Kever Yang

imx9: Improve boot mode autodetection

2024-11-09T11:54:01Z

Improve "mmcautodetect=yes" boot mode autodetection to able to use it if CONFIG_ENV_IS_NOWHERE=y is used for i.MX9 SoCs and i.MX93 EVK board. If both CONFIG_ENV_IS_IN_MMC=y and CONFIG_ENV_IS_NOWHERE=y are in the defconfig, CONFIG_ENV_IS_IN_MMC=y will be overiden default CONFIG_ENV_IS_NOWHERE settings. Goal is in this patch to able to use the boot mode autodetection if defconfig use only CONFIG_ENV_IS_NOWHERE=y option (without CONFIG_ENV_IS_IN_MMC) for any i.MX9 SoC. Signed-off-by: Benjamin Szőke