Branch contains bringup of Acer Iconia Tab A500 (codename picasso), a Tegra 2 Android device with decent Linux kernel support. Ondevice tests and U-Boot test suit all passed.
Variable $fdtfile needs to be set for automatically loading a device-tree from the ESP or boot partition. * Set CONFIG_DEFAULT_FDT_FILE in the defconfig. * Add $fdtfile to the default environment. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The Acer Iconia A500 is a tablet computer designed, developed and marketed by Acer Inc. It is powered by 1 GHz Nvidia Tegra 2 processor and 1GB DDR2 RAM. The A500 is sold with 64 GB, although both 16 GB and 32 GB models are available. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
AMD/Xilinx changes for v2025.04-rc2 fpga: - Cleanup help - Show xilinx only options on Xilinx devices ospi-versal: - Fix alignment issue - Fix cadence_qspi_flash_reset() prototype zynqmp: - Define usb_pgood_delay - Fix bootseq number versal: - Fix mini_ospi configuration versal2: - Enable OPTEE xilinx: - Enable some flashes - Clean up SYS_MALLOC_F_LEN Kconfig - Some binman fixes - DT updates - Enable mkfwumdata compilation - Enable meminfo command - Switch to LWIP and enable HTTPS
Add usb_pgood_delay to ensure proper detection of USB devices. Increase the USB power good delay on the SOM boards, as this is required for certain USB sticks otherwise, they may not be detected. Signed-off-by: Prasad Kummari <prasad.kummari@amd.com> Link: https://lore.kernel.org/r/20250107122915.1378284-1-prasad.kummari@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
Add support for the R-Car S4 Starter Kit with R8A779F4 SoC support. This implementation natively uses OF_UPSTREAM to pull in most recent DT. The defconfig is derived from S4 Spider, with reduced UART baud rate to 921600 Bdps. The DT alias to rswitch is removed as the alias should point to rswitch ports, not to rswitch itself, see [1]. [1] https://lore.kernel.org/linux-arm-kernel/20250118111344.361617-5-marek.vasut+renesas@mailbox.org/ Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Weijie Gao <weijie.gao@mediatek.com> says: This patch series add support for MediaTek MT7987 SoC with its reference boards and related drivers. This patch series add basic boot support on eMMC/SD/SPI-NOR/SPI-NAND for these boards. The clock, pinctrl drivers and the SoC initializaton code are also included. Link: https://lore.kernel.org/r/cover.1737621362.git.weijie.gao@mediatek.com
This patch adds general board files based on MT7987 SoC. MT7987 uses one mmc controller for booting from both SD and eMMC, and the pins of mmc controller are also shared with one spi controller. So three configs are need for these boot types: 1. mt7987_rfb_defconfig - SPI-NOR (spi2) and SPI-NAND (spi0) 2. mt7987_emmc_rfb_defconfig - eMMC + SPI-NOR (spi2) 3. mt7987_sd_rfb_defconfig - SD + SPI-NOR (spi2) Note: spi2 also supports booting from SPI-NAND, but not the default option. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Add initial support for Marvell PXA1908. The SoC has 4 Cortex-A53 cores, a GC7000UL GPU and a variety of peripheral controllers. Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr> Reviewed-by: Stefan Roese <sr@denx.de>
Enable bootstd for OpenRD boards Update defconfigs to the latest u-boot requirements Remove JFFS2 support. See JFFS2 Vulnerability[1]. Move default envs to text-base environment [1] https://lore.kernel.org/u-boot/20241114233005.GN3600562@bill-the-cat/T/#m2fc25da1d2c019bc3cd8676991fdd64b8a21aa9b Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>