u-boot.git/include/configs, branch v2025.04-rc2

Merge tag 'xilinx-for-v2025.04-rc2' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

2025-02-06T14:09:54Z

AMD/Xilinx changes for v2025.04-rc2 fpga: - Cleanup help - Show xilinx only options on Xilinx devices ospi-versal: - Fix alignment issue - Fix cadence_qspi_flash_reset() prototype zynqmp: - Define usb_pgood_delay - Fix bootseq number versal: - Fix mini_ospi configuration versal2: - Enable OPTEE xilinx: - Enable some flashes - Clean up SYS_MALLOC_F_LEN Kconfig - Some binman fixes - DT updates - Enable mkfwumdata compilation - Enable meminfo command - Switch to LWIP and enable HTTPS

configs: zynqmp: Add usb_pgood_delay for SOM boards

2025-02-05T15:22:55Z

Add usb_pgood_delay to ensure proper detection of USB devices. Increase the USB power good delay on the SOM boards, as this is required for certain USB sticks otherwise, they may not be detected. Signed-off-by: Prasad Kummari Link: https://lore.kernel.org/r/20250107122915.1378284-1-prasad.kummari@amd.com Signed-off-by: Michal Simek

arm64: renesas: Add R-Car S4 Starter Kit support

2025-02-04T22:32:00Z

Add support for the R-Car S4 Starter Kit with R8A779F4 SoC support. This implementation natively uses OF_UPSTREAM to pull in most recent DT. The defconfig is derived from S4 Spider, with reduced UART baud rate to 921600 Bdps. The DT alias to rswitch is removed as the alias should point to rswitch ports, not to rswitch itself, see [1]. [1] https://lore.kernel.org/linux-arm-kernel/20250118111344.361617-5-marek.vasut+renesas@mailbox.org/ Signed-off-by: Marek Vasut

Merge patch series "Add support for MediaTek MT7987 SoC"

2025-01-30T20:35:30Z

Weijie Gao says: This patch series add support for MediaTek MT7987 SoC with its reference boards and related drivers. This patch series add basic boot support on eMMC/SD/SPI-NOR/SPI-NAND for these boards. The clock, pinctrl drivers and the SoC initializaton code are also included. Link: https://lore.kernel.org/r/cover.1737621362.git.weijie.gao@mediatek.com

board: mediatek: add MT7987 reference boards

2025-01-30T20:35:14Z

This patch adds general board files based on MT7987 SoC. MT7987 uses one mmc controller for booting from both SD and eMMC, and the pins of mmc controller are also shared with one spi controller. So three configs are need for these boot types: 1. mt7987_rfb_defconfig - SPI-NOR (spi2) and SPI-NAND (spi0) 2. mt7987_emmc_rfb_defconfig - eMMC + SPI-NOR (spi2) 3. mt7987_sd_rfb_defconfig - SD + SPI-NOR (spi2) Note: spi2 also supports booting from SPI-NAND, but not the default option. Signed-off-by: Sam Shih Signed-off-by: Weijie Gao

arm: mmp: add initial support for PXA1908 SoC

2025-01-28T08:08:44Z

Add initial support for Marvell PXA1908. The SoC has 4 Cortex-A53 cores, a GC7000UL GPU and a variety of peripheral controllers. Signed-off-by: Duje Mihanović Reviewed-by: Stefan Roese

arm: kirkwood: Enable bootstd and other modernization for OpenRD boards

2025-01-28T08:08:44Z

Enable bootstd for OpenRD boards Update defconfigs to the latest u-boot requirements Remove JFFS2 support. See JFFS2 Vulnerability[1]. Move default envs to text-base environment [1] https://lore.kernel.org/u-boot/20241114233005.GN3600562@bill-the-cat/T/#m2fc25da1d2c019bc3cd8676991fdd64b8a21aa9b Signed-off-by: Tony Dinh Reviewed-by: Stefan Roese

vexpress64: Fix bootargs when building without NET

2025-01-22T17:21:58Z

When building without DHCP/PXE configurations (NET disabled), compilation errors may occur due to mismatched bootargs. Ensure bootargs related to DHCP/PXE are not enabled if the corresponding commands are disabled. include/config_distro_bootcmd.h:443:9: error: expected ‘}’ before ‘BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE’ 443 | BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Chanho Park Acked-by: Linus Walleij

imx: imx8mq_evk: Switch to BOOTSTD

2025-01-16T13:15:42Z

Move env to imx8mq_evk.env Switch to support BOOTSTD with a bsp bootcmd as fallback. Signed-off-by: Peng Fan

imx: imx8mm_evk: Switch to BOOTSTD

2025-01-16T13:15:42Z

Move env to imx8mm_evk.env Switch to support BOOTSTD with a bsp bootcmd as fallback. Signed-off-by: Peng Fan