u-boot.git/include/configs, branch v2025.10

Merge patch series "AM57 boot fixes"

2025-09-08T14:44:54+00:00

Anurag Dutta  says:

This patch series migrates from .h to .env format for am57xx/dra7xx.
Also, we do relevant changes so that the fdtfile can be set from C code.

logs : https://gist.github.com/anuragdutta731/82560cc9bc958ca70a25a95a7031eeea

Link: https://lore.kernel.org/r/20250901061659.986164-1-a-dutta@ti.com

board: ti: am57xx: Change to using .env

2025-09-08T14:44:33+00:00

Move to using .env file for setting up environment variables
for am57xx and dra7xx.

Signed-off-by: Anurag Dutta

include: env: ti: Use .env for environment variables

2025-09-08T14:44:33+00:00

Add omap common environment variables to .env. We retain the old-style C
environment .h files to maintain compatibility with other omap devices that
have not moved to using .env yet.

Signed-off-by: Anurag Dutta

rk3288: add fdtoverlay_addr_r to default env

2025-08-30T15:04:23+00:00

rk3288 is missing fdtoverlay_addr_r.
The new addresses match those used by rk3308.
Tested on Asus TinkerBoard S.

Signed-off-by: Marius Dinu 
Cc: Simon Glass 
Cc: Philipp Tomsich 
Cc: Kever Yang 
Reviewed-by: Quentin Schulz 
Reviewed-by: Kever Yang

configs: versal2: Add usb_pgood_delay for versal2 boards

2025-08-25T14:20:48+00:00

Add usb_pgood_delay to ensure proper detection of USB devices.
Increase the USB power good delay for versal2 specific boards,
as certain USB sticks may not be detected without it.

Signed-off-by: Venkatesh Yadav Abbarapu 
Link: https://lore.kernel.org/r/20250818045304.4058177-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek

arm64: versal2: Define BOOTENV_DEV_SHARED_XSPI when distro is disabled

2025-08-25T14:20:48+00:00

When DISTRO_DEFAULT is disabled there is missing empty
BOOTENV_DEV_SHARED_XSPI macro defined.

Signed-off-by: Michal Simek 
Link: https://lore.kernel.org/r/4c195468c0341ddd2aca98f83cdcbd40117cc9ee.1753885919.git.michal.simek@amd.com

imx: imx93_{evk, frdm, qsb}: Fix conflict SPL early malloc address

2025-08-23T11:21:48+00:00

Because the early malloc pool size is set to 0x18000, so using this
start address may cause conflict with ATF, then corrupt the heap data.
So we delete the definition to use the default early malloc pool from
CONFIG_SPL_STACK to avoid any conflict

Signed-off-by: Ye Li 

Cherry picked from nxp-imx/uboot-imx commit
1ba675df122627a19debe1d807877052705372c6

Jérémie Dautheribes: applied the same patch to the frdm and qsb
imx93-based boards
Signed-off-by: Jérémie Dautheribes

board: andestech: Add Voyager board support

2025-08-14T07:33:00+00:00

Introduce Voyager board specific code, including
- dram info
- shared cache enabling

Signed-off-by: Randolph Sheng-Kai Lin 
Signed-off-by: Leo Yu-Chi Liang

include: configs: Add config header file for Agilex7 M-series

2025-08-08T14:20:52+00:00

Add config header file for new platform Agilex7 M-series.

Signed-off-by: Tingting Meng 
Signed-off-by: Alif Zakuan Yuslaimi 
Reviewed-by: Tien Fong Chee

arm: socfpga: soc64: Perform warm reset after L2 reset in SPL

2025-08-08T14:20:50+00:00

SPL checks for a magic word in the system manager's scratch
register to determine if an L2 reset has occurred. If detected,
SPL places all slave CPUs (CPU1–3) into WFI mode. The master
CPU (CPU0) then initiates a warm reset by writing to the RMR_EL3
system register and also enters WFI mode.

This warm reset flow is handled entirely within the HPS. The
function `socfpga_sysreset_request()` triggers the warm
reset, and upon SPL re-entry, the updated `lowlevel_init_soc64.S`
handles the necessary initialization.

Signed-off-by: Alif Zakuan Yuslaimi 
Reviewed-by: Tien Fong Chee