u-boot.git/include/dfu.h, branch v2013.10

usb:g_dnl:dfu: Download gadget and DFU function code clean up

2013-09-24T15:51:36+00:00

The download gadget code and DFU function lacks of proper declarations
for the case when a target board wants to use only one of available usb
functions.

Moreover the relevant declarations have been moved to consistent
localization (like ).

Signed-off-by: Lukasz Majewski 
Cc: Marek Vasut

dfu: ram support

2013-09-24T15:51:35+00:00

DFU spec mentions it as a method to upgrade firmware (software stored
in writable non-volatile memory). It also says other potential uses of
DFU is beyond scope of the spec.

Here such a beyond the scope use is being attempted - directly pumping
binary images from host via USB to RAM. This facility is a developer
centric one in that it gives advantage over upgrading non-volatile
memory for testing new images every time during development and/or
testing.

Directly putting image onto RAM would speed up upgrade process. This and
convenience was the initial thoughts that led to doing this, speed
improvement over MMC was only 1 second though - 6 sec on RAM as opposed
to 7 sec on MMC in beagle bone, perhaps enabling cache and/or optimizing
DFU framework to avoid multiple copy for ram (if worth) may help, and
on other platforms and other boot media like NAND maybe improvement
would be higher.

And for a platform that doesn't yet have proper DFU suppport for
non-volatile media's, DFU to RAM can be used.

Another minor advantage would be to increase life of mmc/nand as it
would be less used during development/testing.

usage:  ram  
eg. kernel ram 0x81000000 0x1000000

Downloading images to RAM using DFU is not something new, this is
acheived in openmoko also.

DFU on RAM can be used for extracting RAM contents to host using dfu
upload. Perhaps this can be extended to io for squeezing out register
dump through usb, if it is worth.

Signed-off-by: Afzal Mohammed 
Cc: Heiko Schocher 
Cc: Marek Vasut 
Cc: Lukasz Majewski 
Cc: Pantelis Antoniou 
Cc: Gerhard Sittig 
Acked-by: Marek Vasut 
Acked-by: Lukasz Majewski 
Acked-by: Heiko Schocher

dfu: unify mmc/nand read/write ops enum

2013-09-24T15:51:35+00:00

MMC and NAND independently defines same enumerators for read/write.
Unify them by defining enum in dfu header. RAM support that is being
added newly also can make use of it.

Signed-off-by: Afzal Mohammed 
Cc: Heiko Schocher 
Cc: Marek Vasut 
Cc: Lukasz Majewski 
Cc: Pantelis Antoniou 
Acked-by: Lukasz Majewski 
Acked-by: Marek Vasut 
Acked-by: Heiko Schocher

dfu: Extract common DFU code to handle "dfu_alt_info" environment variable

2013-09-24T15:51:35+00:00

New dfu_init_env_entities() function has been extracted from cmd_dfu.c and
stored at dfu core.

This is a dfu centric code, so it shall be processed in the core.

Change-Id: I756c5de922fa31399d8804eaadc004ee98844ec2
Signed-off-by: Lukasz Majewski 
Tested-by: Heiko Schocher

dfu: Make maximum DFU file size equal to default DFU data buffer

2013-09-24T15:51:35+00:00

Up till now the DFU maximum file size (to be written to e.g. eMMC)
was different from the DFU data buffer size. It caused errors when
one buffer was smaller than data to be written.

Now, the maximum DFU file size is equal to default DFU buffer size.
In spite of this, user is still able to manually adjust those default
values.

Change-Id: Ied75d0f7b59588ebd79dae9a22af801d36622216
Signed-off-by: Lukasz Majewski

dfu, nand, ubi: add partubi alt settings for updating ubi partition

2013-08-26T19:56:34+00:00

updating an ubi partition needs a completely erased mtd partition,
see:
http://lists.infradead.org/pipermail/linux-mtd/2011-May/035416.html

So, add partubi alt setting for the dfu_alt_info environment
variable to mark this partition as an ubi partition. In case we
update an ubi partition, we erase after flashing the image into the
partition, the remaining sektors.

Signed-off-by: Heiko Schocher 
Cc: Pantelis Antoniou 
Cc: Tom Rini 
Cc: Lukasz Majewski 
Cc: Kyungmin Park 
Cc: Marek Vasut 
Cc: Wolfgang Denk 
Cc: Scott Wood

dfu: Implementation of target reset after communication with dfu-util's -R switch

2013-07-29T21:01:33+00:00

This patch extends dfu code to support transmission with -R switch
specified at dfu-util.

When -R is specified, the extra USB_REQ_DFU_DETACH request is sent after
successful data transmission. Then dfu resources are released and reset
command is issued.

Signed-off-by: Lukasz Majewski 
Signed-off-by: Kyungmin Park

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38+00:00

Signed-off-by: Wolfgang Denk 
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini

dfu: make data buffer size configurable

2013-06-30T16:41:07+00:00

Dfu transfer uses a buffer before writing data to the
raw storage device. Make the size (in bytes) of this buffer
configurable through environment variable "dfu_bufsiz".
Defaut value is configurable through CONFIG_SYS_DFU_DATA_BUF_SIZE

Signed-off-by: Heiko Schocher 
Cc: Pantelis Antoniou 
Cc: Tom Rini 
Cc: Lukasz Majewski 
Cc: Kyungmin Park 
Cc: Marek Vasut 
Cc: Wolfgang Denk 
Acked-by: Tom Rini

dfu: NAND specific routines for DFU operation

2013-04-10T13:22:24+00:00

Support for NAND storage devices to work with the DFU framework.

Signed-off-by: Pantelis Antoniou 
Signed-off-by: Tom Rini 
Acked-by: Scott Wood