u-boot.git/include/dm/platform_data, branch v2016.05

serial: add BCM283x mini UART driver

2016-03-27T13:12:52+00:00

The RPi3 typically uses the regular UART for high-speed communication with
the Bluetooth device, leaving us the mini UART to use for the serial
console. Add support for this UART so we can use it.

Signed-off-by: Stephen Warren

serial: pl01x: Add support for devices with the rate pre-configured.

2016-03-22T16:16:12+00:00

For Raspberry Pi, we had the input clock rate to the pl011 fixed in
the rpi.c file, but it may be changed by firmware due to user changes
to config.txt.  Since the firmware always sets up the uart (default
115200 output unless the user changes it), we can just skip our own
uart init to simplify the boot process and more reliably get serial
output.

Signed-off-by: Eric Anholt 
Reviewed-by: Tom Rini 
Tested-by: Stephen Warren

stm32x7: add support for stm32x7 serial driver

2016-02-24T23:43:54+00:00

This patch adds support for stm32f7 family usart peripheral.

Signed-off-by: Vikas Manocha 
Reviewed-by: Simon Glass

serial: lpc32xx hsuart: port driver to driver model

2016-01-14T02:05:22+00:00

The change ports NXP LPC32xx 14-clock UART device driver to driver
model.

Signed-off-by: Vladimir Zapolskiy 
Reviewed-by: Simon Glass

stm32: Convert serial driver to DM

2015-12-12T20:56:08+00:00

Signed-off-by: Kamil Lulko 
Cc: Simon Glass 
Reviewed-by: Simon Glass

serial: uniphier: drop platform data support

2015-08-30T15:28:46+00:00

This driver is enabled only for UniPhier SoCs and ARCH_UNIPHIER now
selects OF_CONTROL and SPL_OF_CONTROL.

This driver no longer needs to support platform data configuration.

Signed-off-by: Masahiro Yamada 
Reviewed-by: Simon Glass

dm: sh: serial: Add support driver model

2015-02-12T22:17:17+00:00

This adds driver model support with this driver. This was tested by Koelsch
board and Gose board.

Signed-off-by: Nobuhiro Iwamatsu 
Acked-by: Simon Glass

dm: serial: use Driver Model for UniPhier serial driver

2014-10-24T03:43:09+00:00

This commit converts UniPhier on-chip serial driver to driver model.

Since UniPhier SoCs do not have Device Tree support, some board files
should be added under arch/arm/cpu/armv7/uniphier/ph1-*/ directories.
(Device Tree support for UniPhier platform is still under way.)

Now the base address and master clock frequency are passed from
platform data, so CONFIG_SYS_UNIPHIER_SERIAL_BASE* and
CONFIG_SYS_UNIPHIER_UART_CLK should be removed.

Tested on UniPhier PH1-LD4 ref board.

Signed-off-by: Masahiro Yamada 
Acked-by: Simon Glass

dm: move platform data headers to include/dm/platform_data

2014-10-24T03:43:07+00:00

The platform_data definitions are generally referenced from both
drivers and board files.  That is why header files defining
platform_data sturectures are placed in "include" directory,
but our top level "include" directory is already too cluttered.

Let's collect platform_data definitions under the directory
"include/dm/platform_data" like Linux gathers ones around under
"include/linux/platform_data".

This commit moves two header files:

  include/serial_mxc.h -> include/dm/platform_data/serial_mxc.h
  include/serial_pl01x.h -> include/dm/platform_data/serial_pl01x.h

Signed-off-by: Masahiro Yamada