u-boot.git/include/dm, branch v2015.10

dm: pci: Add an inline API to test if a device is on a PCI bus

2015-09-17T01:53:52+00:00

Introduce device_is_on_pci_bus() which can be utilized by driver
to test if a device is on a PCI bus.

Signed-off-by: Bin Meng 
Acked-by: Simon Glass

pinctrl: Add the concept of peripheral IDs

2015-09-03T03:28:22+00:00

My original pinctrl patch operating using a peripheral ID enum. This was
shared between pinmux and clock and provides an easy way to specify a device
that needs to be controlled, even it is does not (yet) have a driver within
driver model.

Masahiro's new simple pinctrl gets around this by providing a
set_state_simple() pinctrl method. By passing a device to that call the
peripheral ID becomes unnecessary. If the driver needs it, it can calculate
it itself and use it internally.

However this does not solve the problem for peripheral clocks. The 'pure'
solution would be to pass a driver to the clock uclass also. But this
requires that all devices should have a driver, and a struct udevide. Also
a key optimisation of the clock uclass is allowing a peripheral clock to
be set even when there is no device for that clock.

There may be a better way to achive the same goal, but for now it seems
expedient to add in peripheral ID to the pinctrl uclass. Two methods are
added - one to get the peripheral ID and one to select it. The existing
set_state_simple() is effectively the union of these.

Signed-off-by: Simon Glass

pinctrl: add pin control uclass support

2015-08-31T13:57:29+00:00

This creates a new framework for handling of pin control devices,
i.e. devices that control different aspects of package pins.

This uclass handles pinmuxing and pin configuration; pinmuxing
controls switching among silicon blocks that share certain physical
pins, pin configuration handles electronic properties such as pin-
biasing, load capacitance etc.

This framework can support the same device tree bindings, but if you
do not need full interface support, you can disable some features to
reduce memory foot print.  Typically around 1.5KB is necessary to
include full-featured uclass support on ARM board (CONFIG_PINCTRL +
CONFIG_PINCTRL_FULL + CONFIG_PINCTRL_GENERIC + CONFIG_PINCTRL_PINMUX),
for example.

We are often limited on code size for SPL.  Besides, we still have
many boards that do not support device tree configuration.  The full
pinctrl, which requires OF_CONTROL, does not make sense for those
boards.  So, this framework also has a Do-It-Yourself (let's say
simple pinctrl) interface.  With CONFIG_PINCTRL_FULL disabled, the
uclass itself provides no systematic mechanism for identifying the
peripheral device, applying pinctrl settings, etc.  They must be
done in each low-level driver.  In return, you can save much memory
footprint and it might be useful especially for SPL.

Signed-off-by: Masahiro Yamada 
Acked-by: Simon Glass

dm: core: allow device_bind() to not return a device pointer

2015-08-31T13:57:29+00:00

This is useful when we want to bind a device, but do not need the
pointer to the device.

Signed-off-by: Masahiro Yamada 
Acked-by: Simon Glass

dm: tpm: Add a uclass for Trusted Platform Modules

2015-08-31T13:57:28+00:00

Add a new uclass for TPMs which uses almost the same TIS (TPM Interface
Specification) as is currently implemented. Since init() is handled by the
normal driver model probe() method, we don't need to implement that. Also
rename the transfer method to xfer() which is a less clumbsy name.

Once all drivers and users are converted to driver model we can remove the
old code.

Signed-off-by: Simon Glass 
Acked-by: Christophe Ricard
Reviewed-by: Heiko Schocher

dm: simplify uclass_foreach_dev() implementation

2015-08-31T13:56:44+00:00

This can be simply written with list_for_each_entry(), maybe
this macro was not necessary in the first place.

Signed-off-by: Masahiro Yamada 
Acked-by: Simon Glass

serial: uniphier: drop platform data support

2015-08-30T15:28:46+00:00

This driver is enabled only for UniPhier SoCs and ARCH_UNIPHIER now
selects OF_CONTROL and SPL_OF_CONTROL.

This driver no longer needs to support platform data configuration.

Signed-off-by: Masahiro Yamada 
Reviewed-by: Simon Glass

of: clean up OF_CONTROL ifdef conditionals

2015-08-18T17:46:05+00:00

We have flipped CONFIG_SPL_DISABLE_OF_CONTROL.  We have cleansing
devices, $(SPL_) and CONFIG_IS_ENABLED(), so we are ready to clear
away the ugly logic in include/fdtdec.h:

 #ifdef CONFIG_OF_CONTROL
 # if defined(CONFIG_SPL_BUILD) && !defined(SPL_OF_CONTROL)
 #  define OF_CONTROL 0
 # else
 #  define OF_CONTROL 1
 # endif
 #else
 # define OF_CONTROL 0
 #endif

Now CONFIG_IS_ENABLED(OF_CONTROL) is the substitute.  It refers to
CONFIG_OF_CONTROL for U-boot proper and CONFIG_SPL_OF_CONTROL for
SPL.

Also, we no longer have to cancel CONFIG_OF_CONTROL in
include/config_uncmd_spl.h and scripts/Makefile.spl.

Signed-off-by: Masahiro Yamada 
Reviewed-by: Tom Rini 
Reviewed-by: Simon Glass 
Acked-by: Linus Walleij

dm: drop CONFIG_DM_DEVICE_REMOVE from uncmd list

2015-08-18T17:46:04+00:00

We do not want to compile the DM remove code for SPL.  Currently,
we undef it in include/config_uncmd_spl.h (for C files) and in
scripts/Makefile.uncmd_spl (for Makefiles).  This is really ugly.

This commit demonstrates how we can deprecate those two files.

Use $(SPL_) for the entry in the Makfile and CONFIG_IS_ENABLED()
in C files.

Signed-off-by: Masahiro Yamada 
Reviewed-by: Tom Rini 
Reviewed-by: Simon Glass

dm: core: Fix a typo in the uclass_get_device_by_name() comment

2015-08-06T13:44:30+00:00

This function comment has a typo. Fix it.

Signed-off-by: Simon Glass 
Reviewed-by: Bin Meng