u-boot.git/include/dt-bindings/clock, branch v2019.04 Unnamed repository; edit this file 'description' to name the repository. dts: stm32mp1: clock tree update 2019-02-09T12:50:57+00:00 Patrick Delaunay patrick.delaunay@st.com 2019-01-30T12:07:05+00:00 e74b74c52876d776dda7a7ee5e2a8d555eaa5c4f - Add st,digbypass on clk_hse node (needed for board rev.C) - MLAHB/AHB max frequency increased from 200 to 209MHz, with: - PLL3P set to 208.8MHz for MCU sub-system - PLL3Q set to 24.57MHz for 48kHz SAI/SPI2S - PLL3R set to 11.29MHz for 44.1kHz SAI/SPI2S - PLL4P set to 99MHz for SDMMC and SPDIFRX - PLL4Q set to 74.25MHz for EVAL board Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> 
- Add st,digbypass on clk_hse node (needed for board rev.C)
- MLAHB/AHB max frequency increased from 200 to 209MHz, with:
  - PLL3P set to 208.8MHz for MCU sub-system
  - PLL3Q set to 24.57MHz for 48kHz SAI/SPI2S
  - PLL3R set to 11.29MHz for 44.1kHz SAI/SPI2S
  - PLL4P set to 99MHz for SDMMC and SPDIFRX
  - PLL4Q set to 74.25MHz for EVAL board

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
poplar: sync up device tree with kernel 4.20 2019-01-25T17:12:56+00:00 Shawn Guo shawn.guo@linaro.org 2019-01-17T04:09:50+00:00 8eef803a276c4b586ba5ad82e13485809934ffed It adds missing pinctrl headers, updates clock header and sync up Poplar device tree with kernel 4.20 release. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> 
It adds missing pinctrl headers, updates clock header and sync up Poplar
device tree with kernel 4.20 release.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
sunxi: A64: Update sun50i-a64-ccu.h 2019-01-18T16:49:09+00:00 Jagan Teki jagan@amarulasolutions.com 2018-12-29T18:29:08+00:00 aa86bf90d11fe4c6d4c5ce20895f734ca59aabb7 Update sun50i-a64-ccu.h from the Linux sunxi/dt64-for-4.20 tree: commit 679294497be31596e1c9c61507746d72b6b05f26 Author: Rodrigo Exterckötter Tjäder <rodrigo@tjader.xyz> Date: Wed Sep 26 19:48:24 2018 +0000 arm64: dts: allwinner: a64: a64-olinuxino: set the PHY TX delay This should be a part of previous sync patch from commit 1b39a1834ed182bbd8036a5cd74a9ea111fa4691 Author: Andre Przywara <andre.przywara@arm.com> Date: Mon Oct 29 00:56:47 2018 +0000 sunxi: A64: Update .dts/.dtsi files Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> 
Update sun50i-a64-ccu.h from the Linux sunxi/dt64-for-4.20 tree:
commit 679294497be31596e1c9c61507746d72b6b05f26
Author: Rodrigo Exterckötter Tjäder <rodrigo@tjader.xyz>
Date:   Wed Sep 26 19:48:24 2018 +0000
    arm64: dts: allwinner: a64: a64-olinuxino: set the PHY TX delay

This should be a part of previous sync patch from
commit 1b39a1834ed182bbd8036a5cd74a9ea111fa4691
Author: Andre Przywara <andre.przywara@arm.com>
Date:   Mon Oct 29 00:56:47 2018 +0000

    sunxi: A64: Update .dts/.dtsi files

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
ARM: dts: sun8i: Update A80 dts(i) from Linux-v4.18-rc3 2019-01-18T16:49:09+00:00 Jagan Teki jagan@amarulasolutions.com 2019-01-11T10:52:57+00:00 8dcc7e69224f898272dbbbba2d9a1c5efaa28304 Update all A80 devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commits. arch/arm/boot/dts/sun9i-a80*: commit 190e3138f9577885691540dca59c2f07540bde04 Merge: cafc87023b0d a7affb13b271 Author: Arnd Bergmann <arnd@arndb.de> Date: Tue Mar 27 14:58:00 2018 +0200 Merge tag 'sunxi-h3-h5-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt include/dt-bindings/*/sun9i-a80-*: commit 783ab76ae553abc23f80ef7511052d055697531b Author: Chen-Yu Tsai <wens@csie.org> Date: Sat Jan 28 20:22:36 2017 +0800 clk: sunxi-ng: Add A80 Display Engine CCU Note: sun9i-a80-cx-a99.dts is updated only uart0, since the same dts is not available in Linux. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> 
Update all A80 devicetree dtsi and dtsi files from
Linux-v4.18-rc3 with below commits.

arch/arm/boot/dts/sun9i-a80*:

commit 190e3138f9577885691540dca59c2f07540bde04
Merge: cafc87023b0d a7affb13b271
Author: Arnd Bergmann <arnd@arndb.de>
Date:   Tue Mar 27 14:58:00 2018 +0200

    Merge tag 'sunxi-h3-h5-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt

include/dt-bindings/*/sun9i-a80-*:

commit 783ab76ae553abc23f80ef7511052d055697531b
Author: Chen-Yu Tsai <wens@csie.org>
Date:   Sat Jan 28 20:22:36 2017 +0800

    clk: sunxi-ng: Add A80 Display Engine CCU

Note: sun9i-a80-cx-a99.dts is updated only uart0, since the same
dts is not available in Linux.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
mips: jz47xx: Add JZ4780 SoC support 2018-12-19T14:23:01+00:00 Paul Burton paul.burton@imgtec.com 2018-12-16T22:25:22+00:00 cd71b1d5d26dfff15222f5df8a5a6df68fc41df7 Add initial support for the Ingenic JZ47xx MIPS SoC. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Marek Vasut <marex@denx.de> 
Add initial support for the Ingenic JZ47xx MIPS SoC.

Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Marek Vasut <marex@denx.de>
bmips: bcm6318: add support for bcm6368-enet 2018-12-19T14:23:01+00:00 Álvaro Fernández Rojas noltari@gmail.com 2018-12-01T18:00:41+00:00 93bd64bf0551e51d96cd25e107ca6589372d4377 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
arm: dts: am33xx: Sync dts with Linux 4.20.0 2018-12-07T13:13:51+00:00 Felix Brack fb@ltec.ch 2018-12-05T13:53:42+00:00 fdce9d35dc3671dfc6ce29b4c76e152cc5780869 This patch synchronizes the am33xx SoC specific files with those from Linux 4.20.0. Hence all board maintainers of am33xx based boards are on the cc list. The main purpose of this patch is to prevent further diverging of the dts files from U-Boot and those from Linux. It aims to set the stage for the synchronization of board specific dts files. Example: I'm the maintainer of the PDU001 board: once this patch is applied successfully I will make changes to the board specific dts file in Linux only and then post a patch with a copy of this exact dts file to U-Boot. This will make U-Boot and Linux remain in sync. The stumbling block of https://patchwork.ozlabs.org/patch/943627 was removed by the patch https://patchwork.ozlabs.org/patch/962428 from Lokesh Vutla (many thanks!). This omap-serial driver allows using the Linux am33xx.dtsi file in U-Boot. Other changes to dts and dtsi files made by this patch are mainly to prevent _new_ warnings during the build process. Especially the warning at pinmux@800 stating 'unnecessary #address-cells/#size-cells without "ranges" or child "reg"' was not removed. This warning is a good example showing the benefit of the synchronization: if it needs to be fixed it will be fixed in Linux and ported back to U-Boot. Buildman reports all 46 am33xx SoC based boards to build fine, with warnings of course. Nevertheless this patch should be tested thoroughly on as many boards as possible to prevent any collateral damage. Signed-off-by: Felix Brack <fb@ltec.ch> Reviewed-by: Tom Rini <trini@konsulko.com> 
This patch synchronizes the am33xx SoC specific files with those from
Linux 4.20.0. Hence all board maintainers of am33xx based boards are
on the cc list.
The main purpose of this patch is to prevent further diverging of the
dts files from U-Boot and those from Linux. It aims to set the stage
for the synchronization of board specific dts files. Example: I'm the
maintainer of the PDU001 board: once this patch is applied successfully
I will make changes to the board specific dts file in Linux only and
then post a patch with a copy of this exact dts file to U-Boot. This
will make U-Boot and Linux remain in sync.
The stumbling block of https://patchwork.ozlabs.org/patch/943627 was
removed by the patch https://patchwork.ozlabs.org/patch/962428 from
Lokesh Vutla (many thanks!). This omap-serial driver allows using the
Linux am33xx.dtsi file in U-Boot.
Other changes to dts and dtsi files made by this patch are mainly to
prevent _new_ warnings during the build process. Especially the warning
at pinmux@800 stating 'unnecessary #address-cells/#size-cells without
"ranges" or child "reg"' was not removed. This warning is a good example
showing the benefit of the synchronization: if it needs to be fixed it
will be fixed in Linux and ported back to U-Boot.
Buildman reports all 46 am33xx SoC based boards to build fine, with
warnings of course. Nevertheless this patch should be tested thoroughly
on as many boards as possible to prevent any collateral damage.

Signed-off-by: Felix Brack <fb@ltec.ch>
Reviewed-by: Tom Rini <trini@konsulko.com>
ARM: dts: rmobile: Sync Gen3 DTs with Linux 4.19.6 2018-12-04T08:21:07+00:00 Marek Vasut marek.vasut+renesas@gmail.com 2018-12-03T20:43:05+00:00 cbff9f80cedd4bd4c00ed3fe506b1fc2b209c681 Synchronize DTs with mainline Linux 4.19.6 , commit 96db90800c06d3fe3fa08eb6222fe201286bb778 Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master 
Synchronize DTs with mainline Linux 4.19.6 ,
commit 96db90800c06d3fe3fa08eb6222fe201286bb778

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---
V2: Rebase on u-boot/master
ARM: rockchip: rv1108: Sync clock with vendor tree 2018-11-30T20:56:44+00:00 Otavio Salvador otavio@ossystems.com.br 2018-11-30T13:34:12+00:00 5d2cb15c7737e51f669f80d82ad7286d0f573097 Make adjustments to the rv1108 clock driver in order to align it with the internal Rockchip version. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> 
Make adjustments to the rv1108 clock driver in order to align it
with the internal Rockchip version.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Merge tag 'u-boot-amlogic-20181126' of git://git.denx.de/u-boot-amlogic 2018-11-29T20:16:58+00:00 Tom Rini trini@konsulko.com 2018-11-29T14:33:33+00:00 93e72ac472b537bb4b0c6a97a7e6aab2b37860c6 Cleanup and update towards support for Amlogic Meson AXG SoCs : - mmc: meson-gx: Add AXG compatible - net: designware: add meson meson compatibles - Amlogic Meson cleanup for AXG SoC support 
Cleanup and update towards support for Amlogic Meson AXG SoCs :
- mmc: meson-gx: Add AXG compatible
- net: designware: add meson meson compatibles
- Amlogic Meson cleanup for AXG SoC support