u-boot.git/include/dt-bindings/clock, branch v2023.04

sunxi: dts: arm: update devicetree files from Linux v6.2-rc2

2023-03-05T23:33:13+00:00

Sync the devicetree files from the Linux kernel repo, v6.2-rc2.
This is covering the 32-bit SoCs, from arch/arm/boot/dts.

This enables some new devices for the F1C100s family, though this is of
little relevance to U-Boot itself.
The H3 gains the "phys" property for the first USB controller, which
prevents an error message when U-Boot's USB stack comes up, and allows
using this port in host mode.

As before, this omits the non-backwards compatible changes to the R_INTC
controller, to remain compatible with older kernels.

Signed-off-by: Andre Przywara

dt-bindings: clk: Add dt-binding header for RK3588

2023-02-28T10:07:27+00:00

Add the dt-bindings header for the Rockchip RK3588, that gets
shared between the clock controller and the clock references
in the dts.

commit  ("dt-bindings: clock: add rk3588 clock
definitions")

Signed-off-by: Jagan Teki 
Reviewed-by: Kever Yang

dt-bindings: clock: Pick R-Car Gen3 R8A77961 M3W+ header from Linux 6.1.7

2023-02-02T00:49:19+00:00

Pick R-Car Gen3 R8A77961 M3W+ CPG Core Clock header from Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

Reviewed-by: Marek Vasut 
Signed-off-by: Hai Pham 
Signed-off-by: Marek Vasut  # Update commit message

ARM: dts: rmobile: Synchronize DTs with Linux 6.1.7

2023-02-02T00:49:19+00:00

Synchronize R-Car device trees with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

The following script has been used for the synchronization:

$ for i in $(cd arch/arm/dts/ ; ls -1 r8a* | grep -v 'u-boot.dts' ; sed -n '/#include/ s@.*"\(.*\)"@\1@p' $(ls -1 r8a* | grep -v 'u-boot.dts')) ; do
	if [ -e /linux-2.6/arch/arm64/boot/dts/renesas/$i ] ; then
		cp /linux-2.6/arch/arm64/boot/dts/renesas/$i arch/arm/dts/ ;
	elif [ -e /linux-2.6/arch/arm/boot/dts/$i ] ; then
		cp /linux-2.6/arch/arm/boot/dts/$i arch/arm/dts/
	else
		echo "NOT FOUND: $i"
	fi
done
$ git add $( ( cd arch/arm/dts/ ; ls -1 r8a* | grep -v 'u-boot.dts' ; sed -n '/#include/ s@.*"\(.*\)"@\1@p' $(ls -1 r8a* | grep -v 'u-boot.dts')) | tr " " "\n" | sed 's@^@arch/arm/dts/@g' )

Move the include/dt-bindings/{clk,clock}/versaclock.h header used by
the renesas boards to match Linux 6.1.y as well.

Keep arch/arm/dts/r8a774c0-u-boot.dtsi sdhi3 node as it is now used
by the arch/arm/dts/r8a774c0-cat874.dts board.

Pick s@spi-flash@flash@ change in arch/arm/dts/r8a779a0-falcon-u-boot.dts
from "ARM: dts: Synchronize R-Car V3U DTs with Linux 5.18.3" .

Adjust R8A77990 Ebisu CONFIG_SYS_MMC_ENV_DEV from 2 to 0 to reflect
the card enumeration in ebisu.dtsi /aliases DT node .

Adjust R8A7795 and R8A7796 ULCB CONFIG_SYS_MMC_ENV_DEV from 1 to 0 to
reflect the card enumeration in ulcb.dtsi /aliases DT node .

Signed-off-by: Marek Vasut 
Signed-off-by: Tam Nguyen  # r8a779a0-falcon-u-boot.dts
Signed-off-by: Hai Pham  # r8a779a0-falcon-u-boot.dts

ARM: dts: rmobile: Synchronize DT headers with Linux 6.1.7

2023-02-02T00:49:19+00:00

Synchronize R-Car device tree headers with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

This is only a copyright and SPDX identifier update, no
functional change.

The following script has been used for the synchronization:

$ for i in $(cd include/dt-bindings/clock/ ; ls -1 r8a*) ; do cp /linux-2.6/include/dt-bindings/clock/$i include/dt-bindings/clock/ ; done
$ for i in $(cd include/dt-bindings/power/ ; ls -1 r8a*) ; do cp /linux-2.6/include/dt-bindings/power/$i include/dt-bindings/power/ ; done

Signed-off-by: Marek Vasut

dt-bindings: clk: Add dt-binding header for RV1126

2023-01-16T10:01:11+00:00

Add the dt-bindings header for the Rockchip RV1126, that gets shared
between the clock controller and the clock references in the dts.

Signed-off-by: Finley Xiao 
Signed-off-by: Jagan Teki 
Reviewed-by: Kever Yang

rockchip: rk3128-cru: sync the clock dt-binding header from Linux

2022-12-19T02:56:12+00:00

In order to update the DT for rk3128
sync the clock dt-binding header.
This is the state as of v6.0 in Linux.

Signed-off-by: Johan Jonker 
Reviewed-by: Kever Yang

dt-bindings: stm32mp13: add clock & reset support for STM32MP13

2022-12-07T15:49:35+00:00

Add support of stm32mp13 DT bindings of clock and reset.

Signed-off-by: Gabriel Fernandez 
Reviewed-by: Patrick Delaunay 
Reviewed-by: Patrice Chotard

dt-bindings: clk: add missing clk ids for microchip mpfs

2022-11-15T07:37:17+00:00

When this binding header was initally upstreamed, the PLL clocking the
microprocessor subsystem (MSS) and the RTC reference clocks were
omitted. Add them now, matching the IDs used in Linux.

Signed-off-by: Conor Dooley 
Reviewed-by: Leo Yu-Chi Liang 
Reviewed-by: Padmarao Begari

imx8mp: synchronise device tree with linux

2022-11-08T16:35:00+00:00

Synchronise device tree with linux v6.1-rc3.

Signed-off-by: Marcel Ziswiler 
Tested-By: Tim Harvey  #imx8m{m,n,p}-venice-*