u-boot.git/include/dt-bindings/interrupt-controller/microchip-mpfs-plic.h, branch master Unnamed repository; edit this file 'description' to name the repository. riscv: dts: sync mpfs-icicle devicetree with linux 2023-07-06T09:28:08+00:00 Conor Dooley conor.dooley@microchip.com 2023-06-15T10:12:43+00:00 4e99899bd546b7cd60735df4b18da6eabdc38cb1 The "notable" disappearances are: - the pac193x stanza - there's nothing in mainline linux w.r.t. bindings for this & what is going to appear in mainline linux is going to be incompatible with what is currently in U-Boot. - operating points - these operating points should not be set at the soc.dtsi level as they may not be possible depending on the design programmed to the FPGA - clock output names - there are defines for the clock indices, these should not be needed - the dt maintainers in linux NAKed using defines for IRQ numbers - the qspi nand, which is not part of the icicle's default configuration is removed. Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com> Tested-by: Padmarao Begari <padmarao.begari@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Rick Chen <rick@andestech.com> 
The "notable" disappearances are:
- the pac193x stanza - there's nothing in mainline linux w.r.t. bindings
  for this & what is going to appear in mainline linux is going to be
  incompatible with what is currently in U-Boot.
- operating points - these operating points should not be set at the
  soc.dtsi level as they may not be possible depending on the design
  programmed to the FPGA
- clock output names - there are defines for the clock indices, these
  should not be needed
- the dt maintainers in linux NAKed using defines for IRQ numbers
- the qspi nand, which is not part of the icicle's default configuration
  is removed.

Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com>
Tested-by: Padmarao Begari <padmarao.begari@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rick Chen <rick@andestech.com>
riscv: dts: Split Microchip device tree 2021-12-02T08:43:51+00:00 Padmarao Begari padmarao.begari@microchip.com 2021-11-17T12:51:17+00:00 06142d6874ca58b420c3a77633317daa31c1b88e The device tree split into .dtsi and .dts files, common device node for eMMC/SD, enable I2C1, UART1 for console instead of UART0, enable the DDR 2GB memory and in that 288MB memory is reserved for fabric buffer. Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> 
The device tree split into .dtsi and .dts files, common
device node for eMMC/SD, enable I2C1, UART1 for console
instead of UART0, enable the DDR 2GB memory and in
that 288MB memory is reserved for fabric buffer.

Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>