Replace instances of http://www.ti.com with https://www.ti.com

Signed-off-by: Nishanth Menon <nm@ti.com>

This copies in some devicetree files from the official Linux kernel tree,
v6.6-rc6. It covers a board with the Allwinner T113s SoC, which shares
many devices with its RISC-V sibling, the Allwinner D1(s). This is the
reason for the core .dtsi files landing in the arch/riscv directory.

We are only adjusting the include path to accommodate for the differences
in the U-Boot build system.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Sync the devicetree files from the official Linux kernel tree, v6.6-rc6.
This is covering Allwinner SoCs with 64-bit ARM cores.

Only small cosmetic changes (clock name fixed), but we add the DT for
the new OrangePi Zero 3 board, for which U-Boot enablement patches are
pending.

As before, this omits the non-backwards compatible changes to the R_INTC
controller, to remain compatible with older kernels.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Get this from Linux 6.6-rc3.

Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231005085434.74755-2-avromanov@salutedevices.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

Device tree alignment with Linux kernel v6.6.rc1.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>

This patch adds reset bits for MediaTek MT7988

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>

Device tree alignment with Linux kernel v6.3:
- f5a058023239 - ARM: dts: stm32: add i2c nodes into stm32mp131.dtsi
- 8539ebb435a5 - ARM: dts: stm32: enable i2c1 and i2c5 on
  stm32mp135f-dk.dts
- 8539ebb435a5 - ARM: dts: stm32: add spi nodes into stm32mp131.dtsi
- 15f72e0da4da - ARM: dts: stm32: add pinctrl and disabled spi5 node in
  stm32mp135f-dk
- ea99a5a02ebc - ARM: dts: stm32: Create separate pinmux for qspi cs pin
  in stm32mp15-pinctrl.dtsi
- a306d8962a24 - ARM: dts: stm32: Rename mdio0 to mdio
- 0a5ebb1f3367 - ARM: dts: stm32: Replace SAI format with dai-format DT
  property
- ccdab19738a6 - ARM: dts: stm32: add adc support to stm32mp13
- 022932ab55fd - ARM: dts: stm32: add adc pins muxing on stm32mp135f-dk
- ab2806ddad9d - ARM: dts: stm32: add dummy vdd_adc regulator on
  stm32mp135f-dk
- e46a180c060f - ARM: dts: stm32: add adc support on stm32mp135f-dk
- 9ebf215fbae1 - ARM: dts: stm32: add PWR fixed regulators on stm32mp131
- 16f4ff60519a - ARM: dts: stm32: add USBPHYC and dual USB HS PHY support
  on stm32mp131
- 4a47f0f3e936 - ARM: dts: stm32: add UBSH EHCI and OHCI support on
  stm32mp131
- 2a46bb66c47f - ARM: dts: stm32: add USB OTG HS support on stm32mp131
- 9ebf215fbae1 - ARM: dts: stm32: add fixed regulators to support usb on
  stm32mp135f-dk
- 16f4ff60519a - ARM: dts: stm32: enable USB HS phys on stm32mp135f-dk
- c4e7254cf6dc - ARM: dts: stm32: enable USB Host EHCI on stm32mp135f-dk
- 44978e135916 - ARM: dts: stm32: add pins for stm32g0 typec controller on stm32mp13
- 4f532403b1e5 - ARM: dts: stm32: enable USB OTG in dual role mode on
  stm32mp135f-dk
- e1f15571c96c - ARM: dts: stm32: add mcp23017 pinctrl entry for stm32mp13
- 6cc71374002e - ARM: dts: stm32: add mcp23017 IO expander on I2C1 on
  stm32mp135f-dk
- 7ffd2266bd32 - ARM: dts: stm32: Fix qspi pinctrl phandle for
  stm32mp15xx-dhcor-som
- 21d83512bf2b - ARM: dts: stm32: Fix qspi pinctrl phandle for
  stm32mp15xx-dhcom-som
- 732dbcf52f74 - ARM: dts: stm32: Fix qspi pinctrl phandle for
  stm32mp151a-prtt1l
- 003b7c6b24f4 - ARM: dts: stm32: remove sai kernel clock on
  stm32mp15xx-dkx
- f2b17b39bfff - ARM: dts: stm32: rename sound card on stm32mp15xx-dkx
- dee3cb759d3d - ARM: dts: stm32: Remove the pins-are-numbered property
- ae8cf3b48727 - ARM: dts: stm32: add i2s nodes on stm32mp131
- 619746a27bd0 - ARM: dts: stm32: add sai nodes on stm32mp131
- c5e05d08ef90 - ARM: dts: stm32: add spdifrx node on stm32mp131
- 0a5afd3ee0d0 - ARM: dts: stm32: add dfsdm node on stm32mp131
- bf9d876bea2e - ARM: dts: stm32: add timers support on stm32mp131
- a3183748371d - ARM: dts: stm32: add timer pins muxing for stm32mp135f-dk
- a9060c1326bc - ARM: dts: stm32: add timers support on stm32mp135f-dk
- a12154058f75 - ARM: dts: stm32: Fix User button on stm32mp135f-dk
- 2f33df889e99 - ARM: dts: stm32: Use new media bus type macros
- 366384e49551 - ARM: dts: stm32: Update part number NVMEM description on
  stm32mp131

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

Add resets for the StarFive JH7110 system(SYS),system-top-group(STG) and
always-on(AON) reset controller.

Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>

Add reset ID defines for rk3588.

commit <0a8eb7dae617> ("dt-bindings: reset: add rk3588 reset
definitions")

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

First set of u-boot-at91 features for the 2023.04 cycle:

This feature set includes the new DM-based NAND flash driver (old non-DM
driver is still kept for backwards compatibility), and the move to DM
NAND flash driver for sam9x60ek board. Feature set also includes
devicetree alignment for sama7g5 with Linux, devicetree alignment on USB
with Linux for all boards (sama5, sam9x60), chip id for sama7g5, minor
configs and tweaks.