Add IDs for the clocks of MediaTek MT8189 SoC.

Signed-off-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Reviewed-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20260303-mtk-mt8189-clocks-v4-6-ee85f8dd2f0d@baylibre.com
Signed-off-by: David Lechner <dlechner@baylibre.com>

Tested on HiFive Unleashed and HiFive Unmatched, both SPIFlash and MMC boot.

Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>

After years of developing the ADI ADSP platform, Timesys was purchased
by another company and is no longer contracted to maintain the platform.

Signed-off-by: Philip Molloy <philip.molloy@analog.com>
Reviewed-by: Greg Malysa <malysagreg@gmail.com>

Change mt8365_evk_defconfig to use CONFIG_OF_UPSTREAM=y and delete the
U-Boot copy of the devicetree source files for mt8365.

The upstream devicetree is identical to the U-Boot one being removed
(other than having more nodes for devices not used by U-Boot and
upstream fixed a compatible string in &scpsys, also not affecting
U-Boot).

There was one minor glitch with upstream missing a few topckgen macro
definitions, so those are added to the clock driver directly as a
workaround.

Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>

Remove xlnx-versal-power.h dt binding header because they should be moved
directly to folder where DTs are. In the Linux kernel this shift already
started by moving xlnx-zynqmp-clk.h to arch/arm64/boot/dts/xilinx/ folder.

U-Boot is using only one PD_DEV_OSPI constact which is moved to
zynqmp_firmware.h header. But handling around it should be fixed anyway
because no driver should be calling xilinx_pm_request() directly.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/a0f0154ef89929517c3217efe025e8021a910b90.1764233963.git.michal.simek@amd.com

Add initial device trees for Renesas R-Car X5H R8A78000 SoC.
Include very basic clock, reset, power domain headers which
are used to control supported peripherals via SCMI / SCP. The
headers are currently kept limited to avoid possible ABI break.
A lot of clock are still stubbed via fixed-clock, this is going
to be gradually removed over time, as more of the platform is
upstreamed.

Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Khanh Le <khanh.le.xr@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>

Introduce reset capability for EN7523 device-tree binding

Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>

Introduce header file to define the clock indexes for the Agilex
platform.

Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>

As part of the recent cleanup of dt-bindigns header files we did not
remove our copy of dt-bindings/clock/xlnx-zynqmp-clk.h at the time. This
is because the difference between ours and current upstream is that
current upstream has a #warning to not use it and to instead use
xlnx-zynqmp-clk.h. So we change zynqmp-clk-ccf.dtsi to use the other
and upstream-only file and then delete our dt-bindings file.

Signed-off-by: Tom Rini <trini@konsulko.com>
Tested-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20250612181128.340232-1-trini@konsulko.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

Add SPL support and clock tree init to STM32MP13 RCC driver. This
consists of two parts, make SCMI into an optional dependency and
add clock tree initialization. The SCMI dependency is made optional
first by registering the few core clock provided by SCMI clock as
fixed clock, and second by letting the clock core parse out the
clock configuration from SoC registers. The clock initialization
code is derived from STM32MP15xx clock tree initialization code,
which is almost identical, except for the use of new PLL2000 for
PLL1 on STM32MP13xx .

Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>