u-boot.git/include/dt-bindings, branch v2016.01

rockchip: Bring in RK3036 device tree file includes and bindings

2015-12-01T15:07:22+00:00

Since rk3036 device tree file still in reviewing, bring it from
https://patchwork.kernel.org/patch/7203371/ and add some aliases
we need in uboot

Signed-off-by: Lin Huang 
Acked-by: Simon Glass

am437x: Add am437x_gp_evm_defconfig using CONFIG_DM

2015-10-22T18:44:00+00:00

Import various DT files for am4372, an43xx pinctrl and
am437x-gp-evm from Linux Kernel v4.2
Add config file for this board, enable DM, DM_GPIO, DM_SERIAL
and DM_MMC.

Signed-off-by: Mugunthan V N 
Reviewed-by: Lokesh Vutla

rockchip: Bring in RK3288 device tree file includes and bindings

2015-09-03T03:28:23+00:00

Bring in required device tree files from Linux. Since mainline Linux is
somewhat behind, use the files from the Chromium tree. We can re-sync once
further code is acccepted upstream.

Signed-off-by: Simon Glass

dra7xx: Add dra72_evm_defconfig using CONFIG_DM

2015-08-13T00:48:08+00:00

- Import various DT files for DRA7 / DR72x / dra72-evm from Linux Kernel
  v4.1
- Add config file for this board, enable DM and DM_GPIO

Cc: Simon Glass 
Signed-off-by: Tom Rini 
Reviewed-by: Simon Glass

ARM: Tegra210: Add SoC code/include files for T210

2015-07-28T17:30:19+00:00

All based off of Tegra124. As a Tegra210 board is brought
up, these may change a bit to match the HW more closely,
but probably 90% of this is identical to T124.

Note that since T210 is a 64-bit build, it has no SPL
component, and hence no cpu.c for Tegra210.

Signed-off-by: Tom Warren

ti: Add SPDX license identifier to omap.h

2015-07-08T22:26:41+00:00

This also came from Linux - according to this thread it has a GPL v2
license like arch/arm/mach-omap2/mux.h:

http://lists.denx.de/pipermail/u-boot/2015-June/217827.html

Signed-off-by: Simon Glass 
Reported-by: Ingrid Viitanen 
Reviewed-by: Tom Rini

x86: gpio: add pinctrl support from the device tree

2015-06-04T09:32:08+00:00

Every pin can be configured now from the device tree. A dt-bindings
has been added to describe the different property available.

Change-Id: I1668886062655f83700d0e7bbbe3ad09b19ee975
Signed-off-by: Gabriel Huau 
Acked-by: Simon Glass

x86: Refactor PIRQ routing support

2015-06-04T08:39:39+00:00

PIRQ routing is pretty much common in Intel chipset. It has several
PIRQ links (normally 8) and corresponding registers (either in PCI
configuration space or memory-mapped IBASE) to configure the legacy
8259 IRQ vector mapping. Refactor current Queensbay PIRQ routing
support using device tree and move it to a common place, so that we
can easily add PIRQ routing support on a new platform.

Signed-off-by: Bin Meng 
Acked-by: Simon Glass

sandbox: dts: add sandbox_pmic.dtsi and include it to sandbox.dts and test.dts

2015-05-15T01:59:21+00:00

This commit adds dtsi file for Sandbox PMIC.
It fully describes the PMIC by:
- i2c emul node - with a default settings of 16 registers
- 2x buck regulator nodes
- 2x ldo regulator nodes

The default register settings are set with preprocessor macros:
- VAL2REG(min[uV/uA], step[uV/uA], val[uV/uA])
- VAL2OMREG(mode id)
Both defined in file:
- include/dt-bindings/pmic/sandbox_pmic.h

The Voltage ranges of each regulator can be found in:
- include/power/sandbox_pmic.h

The new file is included into:
- sandbox.dts
- test.dts

Signed-off-by: Przemyslaw Marczak 
Acked-by: Simon Glass 
Tested on sandbox:
Tested-by: Simon Glass

sunxi: dts: Sync all dts files with upstream kernel

2015-05-04T14:51:54+00:00

Bring all the sunxi dts files (and update existing ones) from
mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any
day now). This is necessary so that we can move all sunxi boards over to
the driver model.

Signed-off-by: Hans de Goede 
Reviewed-by: Simon Glass 
Acked-by: Ian Campbell