u-boot.git/include/dt-bindings, branch v2017.01

arm: dts: Add devicetree for i.MX6UL

2016-12-16T16:16:10+00:00

Add i.MX6UL dtsi support from Linux.

Here is the last commit:
"ARM: dts: add gpio-ranges property to iMX GPIO controllers"
(sha1: bb728d662bed0fe91b152550e640cb3f6caa972c)

Cc: Stefano Babic 
Cc: Matteo Lisi 
Cc: Michael Trimarchi 
Signed-off-by: Jagan Teki

arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC

2016-12-16T11:57:12+00:00

Add CX9020 board based on mx53loco.
Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
serial_mxc with DTE and prepare for device tree migration of other
functions and imx53 devices.

The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc

Signed-off-by: Patrick Bruenn

arm: dts: add i.MX6SLL device tree

2016-12-16T10:38:24+00:00

Add i.MX6SLL device tree.

Signed-off-by: Peng Fan 
Cc: Stefano Babic

ARM: dts: dra7xx: sync DT with latest Linux

2016-12-04T18:54:51+00:00

Sync all dra7xx based dts files with latest Linux

Signed-off-by: Lokesh Vutla 
Reviewed-by: Tom Rini

fdt: add dt-bindings for bcm2835

2016-11-29T01:09:48+00:00

This patch adds dt-bindings as used by the linux kernel device trees
for the bcm283x family.

Albert Aribaud 
Signed-off-by: Fabian Vogt 
Reviewed-by: Simon Glass

dt-bindings: clock: imx6qdl: Add clock defines

2016-10-26T14:53:16+00:00

Add imx6qdl clock header defines support from Linux.

"clk: imx: Add clock support for imx6qp"
(sha1: ee36027427c769b0b9e5e205fe43aced93d6aa66)

Cc: Peng Fan 
Cc: Stefano Babic 
Cc: Fabio Estevam 
Cc: Matteo Lisi 
Cc: Michael Trimarchi 
Signed-off-by: Jagan Teki

dt-bindings: add i.mx6ul clock header

2016-10-04T13:41:01+00:00

Add i.mx6ul clock header, copied from kernel commit (29b4817d401).
i.MX6ULL reuse the file in Linux Kernel, so let's keep the same.

Signed-off-by: Peng Fan 
Cc: Simon Glass 
Cc: Stefano Babic

Merge branch 'master' of git://git.denx.de/u-boot-tegra

2016-09-27T16:47:25+00:00

ARM: tegra: pull Tegra210 SoC DT from Linux v4.7

2016-09-27T16:11:02+00:00

The primary benefit of this change is that it adds all missing clocks and
resets properties to peripherals. This will allow peripheral drivers to
migrate to the standard clock and reset APIs in the future.

Main changes:
* Brought in the correct Tegra210 CAR binding; the old file in U-Boot
  appears to be a renamed version of the Tegra124 bindings rather than
  the real Tegra210 version.
* Conversion of SPI and UART nodes to standard DMA bindings. U-Boot
  doesn't use DMA so isn't affected.
* Split of EHCI and USB PHY nodes. The EHCI nodes continue to contain all
  information required by U-Boot, so U-Boot is not affected.
* Conversion of many magic numbers to named defines.
* Addition of many nodes not used by U-Boot, including separation of the
  Tegra LIC (Legacy IRQ controller) and GIC.
* Node sort order fixes.

Remaining deltas relative to the Linux DT:
* U-Boot has enabled PCIe for Tegra210, but the kernel hasn't yet.
* The GPIO node compatible value in the kernel explicitly includes
  Tegra124 values whereas U-Boot does not. I'll send a kernel patch to
  correct this.

Signed-off-by: Stephen Warren 
Signed-off-by: Tom Warren

ARM: tegra: pull Tegra124 SoC DT from Linux v4.7

2016-09-27T16:11:02+00:00

The primary benefit of this change is that it adds all missing clocks and
resets properties to peripherals. This will allow peripheral drivers to
migrate to the standard clock and reset APIs in the future.

Main changes:
* USB phy_type property is aligned with the kernel, so board files are
  updated so the final DT content doesn't change. I'm not convinved that
  Nyan uses HSIC phy_type. However, I'd rather this change be a no-op,
  and any DT bug-fixes be separate.
* Sync misc changes from the kernel: missing DT content, minor compatible
  value fixes, typos.

Remaining deltas relative to the Linux DT:
* U-Boot uses #address-cells/#size-cells of 1 whereas the kernel uses 2.
  I believe U-Boot's DT parsing currently assumes that these values match
  the physical address size, so I didn't synchronize this part of the DT.
* U-Boot uses the original XUSB PHY DT binding, wherease the kernel DT
  has moved to a newer version. Thus, XUSB client nodes include properties
  names phys and phy-names that do not appear in the kernel, and don't
  include pad definitions in the padctl node.

Signed-off-by: Stephen Warren 
Signed-off-by: Tom Warren