u-boot.git/include/dt-bindings, branch v2023.04

sunxi: dts: arm: update devicetree files from Linux v6.2-rc2

2023-03-05T23:33:13+00:00

Sync the devicetree files from the Linux kernel repo, v6.2-rc2.
This is covering the 32-bit SoCs, from arch/arm/boot/dts.

This enables some new devices for the F1C100s family, though this is of
little relevance to U-Boot itself.
The H3 gains the "phys" property for the first USB controller, which
prevents an error message when U-Boot's USB stack comes up, and allows
using this port in host mode.

As before, this omits the non-backwards compatible changes to the R_INTC
controller, to remain compatible with older kernels.

Signed-off-by: Andre Przywara

dt-bindings: reset: add rk3588 reset definitions

2023-02-28T10:07:28+00:00

Add reset ID defines for rk3588.

commit <0a8eb7dae617> ("dt-bindings: reset: add rk3588 reset
definitions")

Signed-off-by: Sebastian Reichel 
Signed-off-by: Jagan Teki 
Reviewed-by: Kever Yang

dt-bindings: power: Add power-domain header for rk3588

2023-02-28T10:07:28+00:00

Add power-domain header for RK3588 SoC from description in TRM.

commit <67944950c2d0> ("dt-bindings: power: add power-domain header for
rk3588")

Signed-off-by: Finley Xiao 
Signed-off-by: Jagan Teki 
Reviewed-by: Kever Yang

dt-bindings: clk: Add dt-binding header for RK3588

2023-02-28T10:07:27+00:00

Add the dt-bindings header for the Rockchip RK3588, that gets
shared between the clock controller and the clock references
in the dts.

commit  ("dt-bindings: clock: add rk3588 clock
definitions")

Signed-off-by: Jagan Teki 
Reviewed-by: Kever Yang

dt-bindings: rockchip: Sync rockchip, vop2.h from Linux

2023-02-28T10:07:26+00:00

Sync rockchip,vop2.h from linux-next, and the last commit is

commit <604be85547ce> ("drm/rockchip: Add VOP2 driver")

Reviewed-by: Kever Yang 
Signed-off-by: Jagan Teki

pinctrl-snapdragon: Get rid of custom drive-strength values

2023-02-10T17:50:00+00:00

Use standard pinconf drive-strength values from Linux DT bindings rather
than ones based on custom u-boot header. These changes are in direction
to make u-boot DTs for Qcom SoCs to be compatible with standard Linux
DT bindings.

Also, add support for pinconf bias-pull-up.

Signed-off-by: Sumit Garg

dt-bindings: clock: Pick R-Car Gen3 R8A77961 M3W+ header from Linux 6.1.7

2023-02-02T00:49:19+00:00

Pick R-Car Gen3 R8A77961 M3W+ CPG Core Clock header from Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

Reviewed-by: Marek Vasut 
Signed-off-by: Hai Pham 
Signed-off-by: Marek Vasut  # Update commit message

dt-bindings: power: Pick R-Car Gen3 R8A77961 M3W+ header from Linux 6.1.7

2023-02-02T00:49:19+00:00

Pick R-Car Gen3 R8A77961 M3W+ power domain header from Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

Reviewed-by: Marek Vasut 
Signed-off-by: Hai Pham 
Signed-off-by: Marek Vasut  # Update commit message

ARM: dts: rmobile: Synchronize DTs with Linux 6.1.7

2023-02-02T00:49:19+00:00

Synchronize R-Car device trees with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

The following script has been used for the synchronization:

$ for i in $(cd arch/arm/dts/ ; ls -1 r8a* | grep -v 'u-boot.dts' ; sed -n '/#include/ s@.*"\(.*\)"@\1@p' $(ls -1 r8a* | grep -v 'u-boot.dts')) ; do
	if [ -e /linux-2.6/arch/arm64/boot/dts/renesas/$i ] ; then
		cp /linux-2.6/arch/arm64/boot/dts/renesas/$i arch/arm/dts/ ;
	elif [ -e /linux-2.6/arch/arm/boot/dts/$i ] ; then
		cp /linux-2.6/arch/arm/boot/dts/$i arch/arm/dts/
	else
		echo "NOT FOUND: $i"
	fi
done
$ git add $( ( cd arch/arm/dts/ ; ls -1 r8a* | grep -v 'u-boot.dts' ; sed -n '/#include/ s@.*"\(.*\)"@\1@p' $(ls -1 r8a* | grep -v 'u-boot.dts')) | tr " " "\n" | sed 's@^@arch/arm/dts/@g' )

Move the include/dt-bindings/{clk,clock}/versaclock.h header used by
the renesas boards to match Linux 6.1.y as well.

Keep arch/arm/dts/r8a774c0-u-boot.dtsi sdhi3 node as it is now used
by the arch/arm/dts/r8a774c0-cat874.dts board.

Pick s@spi-flash@flash@ change in arch/arm/dts/r8a779a0-falcon-u-boot.dts
from "ARM: dts: Synchronize R-Car V3U DTs with Linux 5.18.3" .

Adjust R8A77990 Ebisu CONFIG_SYS_MMC_ENV_DEV from 2 to 0 to reflect
the card enumeration in ebisu.dtsi /aliases DT node .

Adjust R8A7795 and R8A7796 ULCB CONFIG_SYS_MMC_ENV_DEV from 1 to 0 to
reflect the card enumeration in ulcb.dtsi /aliases DT node .

Signed-off-by: Marek Vasut 
Signed-off-by: Tam Nguyen  # r8a779a0-falcon-u-boot.dts
Signed-off-by: Hai Pham  # r8a779a0-falcon-u-boot.dts

ARM: dts: rmobile: Synchronize DT headers with Linux 6.1.7

2023-02-02T00:49:19+00:00

Synchronize R-Car device tree headers with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

This is only a copyright and SPDX identifier update, no
functional change.

The following script has been used for the synchronization:

$ for i in $(cd include/dt-bindings/clock/ ; ls -1 r8a*) ; do cp /linux-2.6/include/dt-bindings/clock/$i include/dt-bindings/clock/ ; done
$ for i in $(cd include/dt-bindings/power/ ; ls -1 r8a*) ; do cp /linux-2.6/include/dt-bindings/power/$i include/dt-bindings/power/ ; done

Signed-off-by: Marek Vasut