u-boot.git/include/dt-bindings, branch v2023.07.01

riscv: dts: sync mpfs-icicle devicetree with linux

2023-07-06T09:28:08Z

The "notable" disappearances are: - the pac193x stanza - there's nothing in mainline linux w.r.t. bindings for this & what is going to appear in mainline linux is going to be incompatible with what is currently in U-Boot. - operating points - these operating points should not be set at the soc.dtsi level as they may not be possible depending on the design programmed to the FPGA - clock output names - there are defines for the clock indices, these should not be needed - the dt maintainers in linux NAKed using defines for IRQ numbers - the qspi nand, which is not part of the icicle's default configuration is removed. Reviewed-by: Padmarao Begari Tested-by: Padmarao Begari Signed-off-by: Conor Dooley Reviewed-by: Rick Chen

dt-bindings: power: add Meson A1 PWRC bindings

2023-06-28T08:05:34Z

We can use them in secure pwrc driver. Signed-off-by: Alexey Romanov Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20230531093156.29240-3-avromanov@sberdevices.ru Signed-off-by: Neil Armstrong

ARM: dts: Add Amlogic Meson A1 DT from Linux 6.3-rc7

2023-06-28T08:05:34Z

Import Linux 6.3-rc7 Device tree and necessary bindings for Amlogic A1 board from 6a8f57ae2eb0 ("Linux 6.3-rc7"). Signed-off-by: Igor Prusov Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20230505125639.3605-2-ivprusov@sberdevices.ru Signed-off-by: Neil Armstrong

global: Use proper project name U-Boot (next)

2023-06-19T20:45:36Z

Use proper project name in DTs, messages and READMEs. Signed-off-by: Michal Simek

ARM: dts: stm32mp: alignment with v6.3

2023-06-16T09:22:07Z

Device tree alignment with Linux kernel v6.3: - f5a058023239 - ARM: dts: stm32: add i2c nodes into stm32mp131.dtsi - 8539ebb435a5 - ARM: dts: stm32: enable i2c1 and i2c5 on stm32mp135f-dk.dts - 8539ebb435a5 - ARM: dts: stm32: add spi nodes into stm32mp131.dtsi - 15f72e0da4da - ARM: dts: stm32: add pinctrl and disabled spi5 node in stm32mp135f-dk - ea99a5a02ebc - ARM: dts: stm32: Create separate pinmux for qspi cs pin in stm32mp15-pinctrl.dtsi - a306d8962a24 - ARM: dts: stm32: Rename mdio0 to mdio - 0a5ebb1f3367 - ARM: dts: stm32: Replace SAI format with dai-format DT property - ccdab19738a6 - ARM: dts: stm32: add adc support to stm32mp13 - 022932ab55fd - ARM: dts: stm32: add adc pins muxing on stm32mp135f-dk - ab2806ddad9d - ARM: dts: stm32: add dummy vdd_adc regulator on stm32mp135f-dk - e46a180c060f - ARM: dts: stm32: add adc support on stm32mp135f-dk - 9ebf215fbae1 - ARM: dts: stm32: add PWR fixed regulators on stm32mp131 - 16f4ff60519a - ARM: dts: stm32: add USBPHYC and dual USB HS PHY support on stm32mp131 - 4a47f0f3e936 - ARM: dts: stm32: add UBSH EHCI and OHCI support on stm32mp131 - 2a46bb66c47f - ARM: dts: stm32: add USB OTG HS support on stm32mp131 - 9ebf215fbae1 - ARM: dts: stm32: add fixed regulators to support usb on stm32mp135f-dk - 16f4ff60519a - ARM: dts: stm32: enable USB HS phys on stm32mp135f-dk - c4e7254cf6dc - ARM: dts: stm32: enable USB Host EHCI on stm32mp135f-dk - 44978e135916 - ARM: dts: stm32: add pins for stm32g0 typec controller on stm32mp13 - 4f532403b1e5 - ARM: dts: stm32: enable USB OTG in dual role mode on stm32mp135f-dk - e1f15571c96c - ARM: dts: stm32: add mcp23017 pinctrl entry for stm32mp13 - 6cc71374002e - ARM: dts: stm32: add mcp23017 IO expander on I2C1 on stm32mp135f-dk - 7ffd2266bd32 - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcor-som - 21d83512bf2b - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcom-som - 732dbcf52f74 - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp151a-prtt1l - 003b7c6b24f4 - ARM: dts: stm32: remove sai kernel clock on stm32mp15xx-dkx - f2b17b39bfff - ARM: dts: stm32: rename sound card on stm32mp15xx-dkx - dee3cb759d3d - ARM: dts: stm32: Remove the pins-are-numbered property - ae8cf3b48727 - ARM: dts: stm32: add i2s nodes on stm32mp131 - 619746a27bd0 - ARM: dts: stm32: add sai nodes on stm32mp131 - c5e05d08ef90 - ARM: dts: stm32: add spdifrx node on stm32mp131 - 0a5afd3ee0d0 - ARM: dts: stm32: add dfsdm node on stm32mp131 - bf9d876bea2e - ARM: dts: stm32: add timers support on stm32mp131 - a3183748371d - ARM: dts: stm32: add timer pins muxing for stm32mp135f-dk - a9060c1326bc - ARM: dts: stm32: add timers support on stm32mp135f-dk - a12154058f75 - ARM: dts: stm32: Fix User button on stm32mp135f-dk - 2f33df889e99 - ARM: dts: stm32: Use new media bus type macros - 366384e49551 - ARM: dts: stm32: Update part number NVMEM description on stm32mp131 Signed-off-by: Patrick Delaunay Reviewed-by: Marek Vasut Reviewed-by: Patrice Chotard

media: dt-bindings: media: Add macros for video interface bus types

2023-06-16T09:22:07Z

Add a new dt-bindings/media/video-interfaces.h header that defines macros corresponding to the bus types from media/video-interfaces.yaml. This allows avoiding hardcoded constants in device tree sources. Based on linux commit f7eeb0084593 ("media: dt-bindings: media: Add macros for video interface bus types") Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard

arm: dts: imx93: sync device tree with Linux

2023-05-21T14:54:41Z

Sync device tree with next-20230426 Signed-off-by: Peng Fan

ARM: dts: add devicetree for Renesas RZ/N1 SoC

2023-05-13T02:01:30Z

This is taken directly from Linux kernel 6.3 (commit 457391b0380335d5e9a5babdec90ac53928b23b4) Signed-off-by: Ralph Siemsen Reviewed-by: Marek Vasut

pinctrl: renesas: add R906G032 driver

2023-05-13T02:01:30Z

Pinctrl/pinconf driver for Renesas RZ/N1 (R906G032) SoC. This is quite rudimentary right now, and only supports applying a default pin configuration as specified by the device tree. Signed-off-by: Ralph Siemsen Reviewed-by: Marek Vasut

dt-binding: histb-clock: add clocks definition for Hi3798MV200

2023-05-03T13:05:24Z

These clocks are found on Hi3798MV200 Signed-off-by: Yang Xiwen