u-boot.git/include/env/phytec, branch v2025.07-rc1

board: phytec: phycore_am62x: Use custom k3_dfu.env fragment

2025-03-18T14:12:53+00:00

TI's k3_dfu.env includes redundant dfu_alt_info_* data, some of which
is incompatible with our board configuration. Replace it with a custom
variant that better aligns with our setup, ensuring correct offsets and
eliminating unnecessary entries.

Signed-off-by: Wadim Egorov

include: env: phytec: Add optargs to K3 files

2025-02-10T16:30:15+00:00

Add the optargs variable so that we can set optional arguments while
booting.

Signed-off-by: Nathan Morrisson 
Signed-off-by: Daniel Schultz

include: env: phytec: Add K3 boot logic for OSPI/QSPI flashes

2024-09-10T19:16:01+00:00

This boot logic allows to boot a Kernel image, Device-Tree blob
and a initramfs from an external OSPI/QSPI NOR flash.

Signed-off-by: Daniel Schultz

include: net: phytec: Add K3 network boot logic

2024-09-10T19:16:01+00:00

This boot logic allows to boot a Kernel image, Device-Tree blob
and overlays via tftp/dhcp (configurable with 'net_fetch_cmd').
Additionally, it loads a rootfs via NFS.

Signed-off-by: Daniel Schultz

include: env: phytec: Add raucinit to k3_mmc environment

2024-09-10T19:16:01+00:00

Initialize the environment for booting an RAUC image when
'doraucboot' is set to 1.

Signed-off-by: Daniel Schultz

include: env: phytec: k3_mmc: Rename variables

2024-09-10T19:16:01+00:00

Add a mmc prefix to 'loadimage' and 'loadfdt' because we need
similar variables for other boot sources. This will prevent
name clashes and allows to implement similar boot logic.

Also switch from loadaddr to kernel_addr_r.

Signed-off-by: Daniel Schultz

include: env: phytec: k3_mmc: Apply overlays during boot

2024-07-22T19:47:57+00:00

Include the overlays.env file and run the apply routine before
booting the Kernel.

Signed-off-by: Daniel Schultz 
Reviewed-by: Wadim Egorov

include: env: phytec: Add common mmc boot for K3 SoMs

2024-07-22T19:47:57+00:00

This environment include can be used to boot from a
MMC device for PHYTEC's K3-based SoMs.

Signed-off-by: Daniel Schultz 
Reviewed-by: Wadim Egorov

include: env: phytec: renaming of variables according to bootstd doc

2024-07-22T19:47:57+00:00

Rename existing environment variables according to the bootstd doc.
Renamed variables are fdto_addr, bootenv_addr, fdt_addr.

Signed-off-by: Benjamin Hahn 
Signed-off-by: Daniel Schultz 
Reviewed-by: Wadim Egorov

include: env: phytec: Create env file for loading and applying overlays

2024-07-22T19:47:57+00:00

The env scripts for loading and applying overlays are identical for many
PHYTEC Boards. Create a common env that can be included.

The env variables bootenv_addr and fdto_addr are board specific and need
to be set in the board specific file. The env variable get_cmd also
needs to be set in board specific files and can be set to tftp or dhcp.

Signed-off-by: Benjamin Hahn 
Signed-off-by: Daniel Schultz 
Reviewed-by: Teresa Remmet 
Reviewed-by: Wadim Egorov