u-boot.git/include/environment, branch v2021.10

environment: ti: k3_dfu: Increase the size allocated for bootloader images in dfu_alt_info_ram

2021-09-11T00:10:20+00:00

The size of u-boot.img is above 1MB and that of tispl.bin is close to 1MB,
in case of j721e. Therefore, increase the sizes allocated for tispl.bin and
u-boot.img to 2 MB and 4 MB respectively, in dfu_alt_info_ram environment
variable.

Signed-off-by: Aswath Govindraju

environment: ti: mmc.h: Make the finduuid generic for usage across different device types

2021-09-11T00:10:20+00:00

Make finduuid generic by making it dependent on the boot variable. For
example, this can now be used for finding the uuid of partitions in usb
device too.

Signed-off-by: Aswath Govindraju

arm: ti: environment: Move in to

2021-07-15T12:26:04+00:00

This include file is only used by ti_omap5_common.h.  Further, the move
is towards using the generic distro boot framework and not this set of
macros.  Start by moving all of the contents in directly to where they
are used.

Signed-off-by: Tom Rini 
Signed-off-by: Lokesh Vutla 
Link: https://lore.kernel.org/r/20210701132612.7559-2-trini@konsulko.com

ARM: ti: Increase the allocated size for MLO.raw

2021-05-27T09:26:42+00:00

MLO has increased to a size greater than the allocated
128 kB in dfu_alt_info_emmc and _mmc.

Therefore, double the allocated size for MLO.raw in
the default environment.

Signed-off-by: Faiz Abbas 
Signed-off-by: Aswath Govindraju 
Signed-off-by: Lokesh Vutla 
Link: https://lore.kernel.org/r/20210419065027.5834-1-a-govindraju@ti.com

Merge tag 'ti-v2021.01-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti

2020-10-12T11:26:57+00:00

- Minor cleanup on K3 env variables
- Fix OSPI compatible for J721e
- Drop unused property in omap-usb2-phy
- Update Maintainer for am335x-guardian board.

env: ti: ufs: Use dtboaddr instead of overlayaddr

2020-10-12T02:39:53+00:00

Use dtboaddr to define the overlay address common to all TI platforms
instead of creating a new overlayaddr for the purpose.

Signed-off-by: Nishanth Menon

ti: Use devtype=mmc instead of setenv devtype mmc

2020-09-15T13:21:53+00:00

If devtype variable is setted via setenv, then the following devtype=X style is
ignored. Currently, many u-boot commands use devtype variable in the latter
manner:

    mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi

Use devtype=mmc instead of setenv devtype mmc to avoid bugs with booting from
another devtype.

Signed-off-by: Matwey V. Kornilov

common: Drop linux/stringify.h from common header

2020-05-19T01:19:23+00:00

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass

environment: distro: Add SF distro command

2020-04-28T20:14:35+00:00

Add distro boot command support for SPI flash (SF).

This distro boot will read the boot script at specific
location at the flash and start sourcing the same.

This file need to include on required include/config
file.

Cc: Tom Rini 
Signed-off-by: Jagan Teki 
Reviewed-by: Tom Rini

env: ti: boot: Fix Android boot on AM57x EVM

2020-03-03T07:38:14+00:00

When applying DTBO on top of DTB (with "fdt apply" command) on AM57x EVM
board, there is not enough memory reserved in RAM for DTB blob. Hence,
DTBO can't be merged in DTB. It leads to inability to boot Android with
next error message:

    failed on fdt_overlay_apply(): FDT_ERR_NOSPACE

To overcome that issue let's provide 512 KiB of space to keep DTB and
all merged DTBO blobs. To do so, "length" parameter should be specified
for "fdt addr" command:

    => fdt addr $fdtaddr 0x80000

512 KiB is the maximum size we can use for this, because next address
after $fdtaddr is 512 KiB ahead of it:

    fdtaddr=0x88000000
    rdaddr=0x88080000

Also add size variables to 'adtimg' command invocations, to avoid
cluttering the console with DTBO blob sizes.

Signed-off-by: Sam Protsenko 
Reviewed-by: Eugeniu Rosca