u-boot.git/include/fdtdec.h, branch v2018.07

fdt: Add another Altera Arria10 clock init compatible

2018-05-18T08:30:45+00:00

The DT bindings for the Arria10 clock init have changed, add another
compatible to make them work with U-Boot until a proper clock driver
gets written.

Signed-off-by: Marek Vasut 
Cc: Tom Rini 
Cc: Chin Liang See 
Cc: Dinh Nguyen

lib: fdtdec: drop the old compatible about max77686

2018-05-08T04:12:33+00:00

Drop the old compatible about max77686.

Signed-off-by: Jaehoon Chung 
Acked-by: Lukasz Majewski

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12+00:00

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini

libfdt: move headers to and

2018-03-05T15:16:28+00:00

Thomas reported U-Boot failed to build host tools if libfdt-devel
package is installed because tools include libfdt headers from
/usr/include/ instead of using internal ones.

This commit moves the header code:
  include/libfdt.h         -> include/linux/libfdt.h
  include/libfdt_env.h     -> include/linux/libfdt_env.h

and replaces include directives:
  #include       -> #include 
  #include   -> #include 

Reported-by: Thomas Petazzoni 
Signed-off-by: Masahiro Yamada

sandbox: Add 64-bit sandbox

2018-02-18T22:53:48+00:00

To debug device tree issues involving 32- and 64-bit platforms, it is useful to
have a generic 64-bit platform available.

Add a version of the sandbox that uses 64-bit integers for its physical
addresses as well as a modified device tree.

Signed-off-by: Mario Six 
Added CONFIG_SYS_TEXT_BASE to configs/sandbox64_defconfig
Signed-off-by: Simon Glass

fdtdec: allow board to provide fdt for CONFIG_OF_SEPARATE

2018-01-15T21:29:03+00:00

Similar to CONFIG_OF_BOARD, but in this case the fdt is still built by
u-boot build.  This allows the board to patch the fdt, etc.

In the specific case of dragonboard 410c, we pass the u-boot generated
fdt to the previous stage of bootloader (by embedding it in the
u-boot.img that is loaded by lk/aboot), which patches the fdt and passes
it back to u-boot.

Signed-off-by: Rob Clark 
[trini: Update board_fdt_blob_setup #if check]
Signed-off-by: Tom Rini

fdt: Add compatible strings for Arria 10

2017-11-26T01:34:10+00:00

Add compatible strings for Intel Arria 10 SoCFPGA device.

Signed-off-by: Tien Fong Chee

dtoc: Add support for 32 or 64-bit addresses

2017-09-15T11:27:38+00:00

When using 32-bit addresses dtoc works correctly. For 64-bit addresses it
does not since it ignores the #address-cells and #size-cells properties.

Update the tool to use fdt64_t as the element type for reg properties when
either the address or size is larger than one cell. Use the correct value
so that C code can obtain the information from the device tree easily.

Alos create a new type, fdt_val_t, which is defined to either fdt32_t or
fdt64_t depending on the word size of the machine. This type corresponds
to fdt_addr_t and fdt_size_t. Unfortunately we cannot just use those types
since they are defined to phys_addr_t and phys_size_t which use
'unsigned long' in the 32-bit case, rather than 'unsigned int'.

Add tests for the four combinations of address and size values (32/32,
64/64, 32/64, 64/32). Also update existing uses for rk3399 and rk3368
which now need to use the new fdt_val_t type.

Signed-off-by: Simon Glass 

Suggested-by: Heiko Stuebner 
Reported-by: Kever Yang 
Reviewed-by: Philipp Tomsich 
Tested-by: Kever Yang

fdtdec: Drop old compatible values

2017-07-28T18:02:48+00:00

These are not needed now since the drivers now use driver model. Drop
them.

Signed-off-by: Simon Glass 
Tested-by: Marcel Ziswiler 
Tested-on: Beaver, Jetson-TK1
Tested-by: Stephen Warren

cros_ec: Convert to support live tree

2017-06-01T13:03:11+00:00

Convert this driver to support the live device tree and remove the old
fdtdec support.

The keyboard is not yet converted.

Signed-off-by: Simon Glass