u-boot.git/include/flash.h, branch v1.3.1

Add MACH_TYPE records for several AT91 boards.

2007-08-14T09:10:52+00:00

Merge to two at45.c files into a common file, split to at45.c and spi.c
Fix spelling error in DM9161 PHY Support.
Initialize at91rm9200 board (and set LED).
Add PIO control for at91rm9200dk LEDs and Mux.
Change dataflash partition boundaries to be compatible with Linux 2.6.

Signed-off-by:	Peter Pearse 
Signed-off-by:	Ulf Samuelsson

[PATCH] Add flash chip M29W320ET/B support

2007-03-18T17:26:11+00:00

Add port for the lpc2292sodimm evaluation board from EmbeddedArtists

2007-01-24T11:16:56+00:00

Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)

2006-12-24T00:27:41+00:00

[PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]

2006-11-13T12:58:55+00:00

   * Adds support for AMD command set Top Boot flash geometry reversal
   * Adds support for reading JEDEC Manufacturer ID and Device ID
   * Adds support for displaying command set, manufacturer id and
     device ids (flinfo)
   * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
   * Removes outdated change history (refer to git log instead)

Signed-off-by: Tolunay Orkun 
Signed-off-by: Stefan Roese

Update for CAM5200 board:

2006-10-03T18:28:38+00:00

  - Map in a additional chip selects CS4 and CS5.
  - Modify the port configration, configure six UARTs and no PCI,
    ATA and USB.
  - Add custom flash driver to handle specific byte swapping

* Update Intel IXP4xx support

2006-05-30T13:56:48+00:00

- Add IXP4xx NPE ethernet MAC support
- Add support for Intel IXDPG425 board
- Add support for Prodrive PDNB3 board
- Add IRQ support
Patch by Stefan Roese, 23 May 2006

[This patch does not include cpu/ixp/npe/IxNpeMicrocode.c which still
 sufferes from licensing issues. Blame Intel.]

* Changes/fixes for drivers/cfi_flash.c:

2006-04-01T11:44:14+00:00

  - Add Intel legacy lock/unlock support to common CFI driver

    On some Intel flash's (e.g. Intel J3) legacy unlocking is
    supported, meaning that unlocking of one sector will unlock
    all sectors of this bank. Using this feature, unlocking
    of all sectors upon startup (via env var "unlock=yes") will
    get much faster.

  - Fixed problem with multiple reads of envronment variable
    "unlock" as pointed out by Reinhard Arlt & Anders Larsen.

  - Removed unwanted linefeeds from "protect" command when
    CFG_FLASH_PROTECTION is enabled.

  - Changed p3p400 board to use CFG_FLASH_PROTECTION

  Patch by Stefan Roese, 01 Apr 2006

* Changes/fixes for drivers/cfi_flash.c:
  - Correctly handle the cases where CFG_HZ != 1000 (several
    XScale-based boards)
  - Fix the timeout calculation of buffered writes (off by a
    factor of 1000)
  Patch by Anders Larsen, 31 Mar 2006

Add ADI Blackfin support

2006-03-12T01:10:00+00:00

- add support for Analog Devices Blackfin BF533 CPU
- add support for the ADI BF533 Stamp uClinux board
- add support for the ADI BF533 EZKit board
Patches by Richard Klingler, June 11th 2005:

Fix problem with flash_get_size() from CFI driver update

2006-03-01T16:00:49+00:00

Patch by Stefan Roese, 1 Mar 2006