u-boot.git/include/image.h, branch v2018.05-rc2

image: fit: Show firmware configuration property if present

2018-04-07T00:45:44+00:00

SPL ATF support requires to have firmware property which should be also
listed by mkimage -l when images is created.

The patch is also using this macro in spl_fit to match keyword.

When image is created:
 Default Configuration: 'config'
 Configuration 0 (config)
  Description:  ATF with full u-boot
  Kernel:       unavailable
  Firmware:     atf
  FDT:          dtb

Signed-off-by: Michal Simek 
Reviewed-by: Simon Glass 
Reviewed-by: Jun Nie 
Reviewed-by: Philipp Tomsich

image.h: add forward declaration of struct fdt_region

2018-04-01T14:19:10+00:00

This header needs to know 'fdt_region' is a struct for the
fit_region_make_list() prototype.

Signed-off-by: Masahiro Yamada 
Reviewed-by: Simon Glass

image: Add IH_OS_TEE for TEE chain-load boot

2018-03-19T20:14:25+00:00

This patch adds a new type IH_OS_TEE. This new OS type will be used for
chain-loading to Linux via a TEE.

With this patch in-place you can generate a bootable OPTEE image like this:

mkimage -A arm -T kernel -O tee -C none -d tee.bin uTee.optee

where "tee.bin" is the input binary prefixed with an OPTEE header and
uTee.optee is the output prefixed with a u-boot wrapper header.

This image type "-T kernel -O tee" is differentiated from the existing
IH_TYPE_TEE "-T tee" in that the IH_TYPE is installed by u-boot (flow
control returns to u-boot) whereas for the new IH_OS_TEE control passes to
the OPTEE firmware and the firmware chainloads onto Linux.

Andrew Davis gave the following ASCII diagram:

IH_OS_TEE: (mkimage -T kernel -O tee)
Non-Secure       Secure

                 BootROM
                   |
      -------------
     |
     v
    SPL
     |
     v
   U-Boot ------>
          <-----  OP-TEE
      |
      V
    Linux

IH_TYPE_TEE: (mkimage -T tee)
Non-Secure       Secure

                 BootROM
                   |
      -------------
     |
     v
    SPL ------->
         <-----  OP-TEE
     |
     v
   U-Boot
      |
      V
    Linux

Signed-off-by: Bryan O'Donoghue 
Suggested-by: Andrew F. Davis 
Cc: Harinarayan Bhatta 
Cc: Andrew F. Davis 
Cc: Tom Rini 
Cc: Kever Yang 
Cc: Philipp Tomsich 
Cc: Peng Fan 
Link: http://mrvan.github.io/optee-imx6ul

tools/mkimage: add support for STM32 image format

2018-03-19T20:14:19+00:00

STM32MP157 bootrom needs a specific header for first boot stage.
This patch adds support of this header in mkimage.

Signed-off-by: Patrick Delaunay

SPL: Add signature verification when loading image

2018-03-19T13:59:32+00:00

U-boot proper signature is not verified by SPL on most platforms
even config SPL_FIT_SIGNATURE is enabled. Only fsl-layerscape
platform support secure boot in platform specific code. So
verified boot cannot be achieved if u-boot proper is loaded by
SPL.

This patch add signature verification to u-boot proper images
when loading FIT image in SPL. It is tested on Allwinner bananapi
zero board with H2+ SoC.

Signed-off-by: Jun Nie

libfdt: move headers to and

2018-03-05T15:16:28+00:00

Thomas reported U-Boot failed to build host tools if libfdt-devel
package is installed because tools include libfdt headers from
/usr/include/ instead of using internal ones.

This commit moves the header code:
  include/libfdt.h         -> include/linux/libfdt.h
  include/libfdt_env.h     -> include/linux/libfdt_env.h

and replaces include directives:
  #include       -> #include 
  #include   -> #include 

Reported-by: Thomas Petazzoni 
Signed-off-by: Masahiro Yamada

move booti_setup to arch/arm/lig/image.c

2018-02-08T03:06:11+00:00

Follow bootz's pattern by moving the booti_setup to arch/arm/lib.
This allows to use booti_setup in other paths, e.g booting
an Android image containing Image format.

Note that kernel relocation is move out of booti_setup and it is the
caller's responsibility to do it and allows them do it differently. say,
cmd/booti.c just do a manually, while in the bootm path, we can use
bootm_load_os(with some changes).

Signed-off-by: Bin Chen 
Reviewed-by: Tom Rini

parse the second area of android image

2018-02-08T02:58:26+00:00

The second area of android image was intended to put a 2nd stage
bootloader but in practice were rarely used (in my knowledge).

An proposal was made to the AOSP to (re)use the second area as the dtb[1],
This patch itself doesn't depend on that proposal being accepted but it won't
be that helpful as well if that proposal won't be accepted. But don't do
any harm as well.

[1] https://android-review.googlesource.com/#/c/417447/
Signed-off-by: Bin Chen 
Reviewed-by: Tom Rini 
Reviewed-by: Kever Yang

fix incorrect usage of DT node unit address in comments

2018-01-16T01:29:21+00:00

The DT spec demands a unit-address in a node name to match the "reg"
property in that node. Newer dtc versions will throw warnings if this is
not the case.
Fix all occurences in the tree where node names were mentioned in
comments, to not give bad examples to the reader.

Signed-off-by: Andre Przywara

riscv: Modify generic codes to support RISC-V

2018-01-12T13:05:12+00:00

Support common commands bdinfo and image format,
also modify common generic flow for RISC-V.

Signed-off-by: Rick Chen 
Signed-off-by: Rick Chen 
Signed-off-by: Greentime Hu 
Reviewed-by: Tom Rini