u-boot.git/include/lcd.h, branch v2013.07-rc2

lcd: add functions to set up simplefb device tree

2013-06-05T20:40:03+00:00

simple-framebuffer is a new device tree binding that describes a pre-
configured frame-buffer memory region and its format. The Linux kernel
contains a driver that supports this binding. Implement functions to
create a DT node (or fill in an existing node) with parameters that
describe the framebuffer format that U-Boot is using.

This will be immediately used by the Raspberry Pi board in U-Boot, and
likely will be used by the Samsung ARM ChromeBook support soon too. It
could well be used by many other boards (e.g. Tegra boards with built-in
LCD panels, which aren't yet supported by the Linux kernel).

Signed-off-by: Stephen Warren 
Acked-by: Simon Glass

Merge branch 'u-boot/master' into 'u-boot-arm/master'

2013-04-12T20:07:57+00:00

Conflicts:
	drivers/video/exynos_fb.c

video: exynos_fb: Remove callbacks from the driver

2013-03-27T12:17:12+00:00

Replaced the functionality of callbacks by using a standard set of functions.
Instead of implementing and hooking up a callback, put the same code in one of
the standard set of functions by overriding it.

This patch is tested only on SMDK5250.
For Trats and universal_c210 board, it is only compile tested.

Signed-off-by: Ajay Kumar 
Signed-off-by: Minkyu Kang

common/lcd.c: move the macro's to the c file

2013-03-21T09:38:51+00:00

Hide the console macros since some reference global data which is
no longer present.

cc: Anatolij Gustschin 
Signed-off-by: Jeroen Hofstee

common/lcd: cosmetic: clean up a bit

2013-03-21T09:31:38+00:00

 - Make the brackets of the function calls more consistent
 - Remove really unnecessary brackets
 - Removes the extern from the function definitions
 - Remove curly brackets from single line statements
 - Remove lcd_setmem proto since it is already in common.h
 - Cleanup comments, remove useless comments
 - Remove NOT_USED_SO_FAR ifdef
 - Cleanup coding style

cc: Anatolij Gustschin 
Signed-off-by: Jeroen Hofstee 
[agust: rebased the original patch]
Signed-off-by: Anatolij Gustschin

common/lcd.c: remove global lcd_base

2013-03-21T09:16:53+00:00

lcd_base is available as gd->fb_base as well, there is no need
to keep a seperate copy.

For completeness the ack of Bo Shen is for the atmel part.
Cc: Alessandro Rubini 
Cc: Anatolij Gustschin 
Cc: Bo Shen 
Cc: Haavard Skinnemoen 
Cc: Kyungmin Park 
Cc: Marek Vasut 
Cc: Minkyu Kang 
Cc: Nikita Kiryanov 
Cc: Simon Glass 
Cc: Stelian Pop 
Cc: Tom Warren 
Acked-by: Bo Shen 
Signed-off-by: Jeroen Hofstee 
[agust: also fix cm_t35 board while rebasing]
Signed-off-by: Anatolij Gustschin

common/lcd.c: cleanup use of global variables

2013-03-21T09:11:17+00:00

console_col, console_row, lcd_line_length, lcd_console_address had
to be declared in board / driver specific code, but were not actually
used there on many boards. Get rid of the global variables.

for completeness, the ack of Bo Shen is for the atmel part
Cc: Alessandro Rubini 
Cc: Anatolij Gustschin 
Cc: Bo Shen 
Cc: Kyungmin Park 
Cc: Marek Vasut 
Cc: Minkyu Kang 
Cc: Nikita Kiryanov 
Cc: Simon Glass 
Cc: Stelian Pop 
Cc: Tom Warren 
Acked-by: Bo Shen 
Signed-off-by: Jeroen Hofstee 
[agust: rebased and fixed cm_t35 board]
Signed-off-by: Anatolij Gustschin

common/lcd.c: cleanup use of global variables

2013-03-21T08:05:08+00:00

lcd_color_fg and lcd_color_bg had to be declared in board specific
code, but were not actually used there; in addition, we have getter /
setter functions for these, which were not used either.

Get rid of the global variables, and use the getter function where
needed (so far no setter calls are needed).

Signed-off-by: Wolfgang Denk 
Cc: Alessandro Rubini 
Cc: Anatolij Gustschin 
Cc: Bo Shen 
Cc: Haavard Skinnemoen 
Cc: Kyungmin Park 
Cc: Marek Vasut 
Cc: Minkyu Kang 
Cc: Nikita Kiryanov 
Cc: Simon Glass 
Cc: Stelian Pop 
Cc: Tom Warren 
Acked-by: Simon Glass 
Acked-by: Jeroen Hofstee 
[agust: also fixed cm_t35 board while rebasing]
Signed-off-by: Anatolij Gustschin

lcd: add option for board specific splash screen preparation

2013-03-08T21:41:13+00:00

Currently there is no logical place to put the code that prepares the
splash image data. The splash image data should be ready in memory
before bmp_display() is called, and after the environment is ready
(since lcd.c looks for the splash image in an address specified by
the environment variable "splashimage").

Our window of opportunity in board_init_r() is therefore: between
env_relocate() and bmp_display(), and from the available options
only the lcd related functions in drv_lcd_init() seem appropriate
for such lcd oriented code.

Add the option to prepare the splash image data in lcd_logo() right
before it is sent to be displayed.

Cc: Anatolij Gustschin 
Cc: Jeroen Hofstee 
Signed-off-by: Nikita Kiryanov 
Signed-off-by: Igor Grinberg

Merge branch 'master' of git://git.denx.de/u-boot into resolve

2012-12-10T05:13:27+00:00

Conflicts:
	README
	board/samsung/universal_c210/universal.c
	drivers/misc/Makefile
	drivers/power/power_fsl.c
	include/configs/mx35pdk.h
	include/configs/mx53loco.h
	include/configs/seaboard.h