u-boot.git/include/linux/mtd, branch v2018.09-rc3

mtd: remove stale comment in mtd_oob_ops structure

2018-07-24T13:25:23+00:00

A comment in the kernel doc of the mtd_oob_ops structure tells that it
is not possible to write more than one page with OOB. This was
probably true at some time in the past but today it is entirely wrong.

As one can see for instance in the nand_do_write_ops() helper available
in the NAND core, this implementation called by mtd->_write_oob()
simply loops over the pages until everything has been written.

Signed-off-by: Miquel Raynal

mtd: nand: add new enum for storing ECC algorithm

2018-07-23T18:33:21+00:00

Our nand_ecc_modes_t is already a bit abused by value NAND_ECC_SOFT_BCH.
This enum should store ECC mode only and putting algorithm details there
is a bad idea. It would result in too many values impossible to support
in a sane way.

To solve this problem let's add a new enum. We'll have to modify all
drivers to set it properly but once it's done it'll be possible to drop
NAND_ECC_SOFT_BCH. That will result in a cleaner design and more
possibilities like setting ECC algorithm for hardware ECC mode.

Signed-off-by: Rafał Miłecki 
Signed-off-by: Boris Brezillon 
[Linux commit: b0fcd8ab7b3c89b5da7fff5224d06ed73e7a33cc]
[Philippe Reynes: adapt code to u-boot]
Signed-off-by: Philippe Reynes

mtd: nand: export nand_get_flash_type function

2018-06-27T10:20:55+00:00

`nand_get_flash_type()` allows identification of supported NAND flashs.
The function is useful in SPL (like mxs_nand_spl.c) to lookup for a NAND
flash (which does not support ONFi) instead of using nand_simple.c and
hard-coding all required NAND parameters.

Signed-off-by: Jörg Krause

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12+00:00

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini

mtd: nand: include from include/linux/mtd/rawnand.h

2017-12-04T13:00:01+00:00

This is needed for ARCH_DMA_MINALIGN.

Signed-off-by: Masahiro Yamada

mtd: nand: Rename nand.h into rawnand.h

2017-12-04T13:00:00+00:00

This header was renamed to rawnand.h in Linux.

The following is the corresponding commit in Linux.

  commit d4092d76a4a4e57b65910899948a83cc8646c5a5
  Author: Boris Brezillon 
  Date:   Fri Aug 4 17:29:10 2017 +0200

      mtd: nand: Rename nand.h into rawnand.h

      We are planning to share more code between different NAND based
      devices (SPI NAND, OneNAND and raw NANDs), but before doing that
      we need to move the existing include/linux/mtd/nand.h file into
      include/linux/mtd/rawnand.h so we can later create a nand.h header
      containing all common structure and function prototypes.

Signed-off-by: Masahiro Yamada

mtd: nand: introduce NAND_ROW_ADDR_3 flag

2017-11-28T15:28:59+00:00

Several drivers check ->chipsize to see if the third row address cycle
is needed.  Instead of embedding magic sizes such as 32MB, 128MB in
drivers, introduce a new flag NAND_ROW_ADDR_3 for clean-up.  Since
nand_scan_ident() knows well about the device, it can handle this
properly.  The flag is set if the row address bit width is greater
than 16.

Delete comments such as "One more address cycle for ..." because
intention is now clear enough from the code.

Signed-off-by: Masahiro Yamada 
Acked-by: Wenyou Yang 
Signed-off-by: Boris Brezillon 

[Linux commit: 14157f861437ebe2d624b0a845b91bbdf8ca9a2d]

mtd: nand: add a shorthand to generate nand_ecc_caps structure

2017-11-28T15:28:59+00:00

struct nand_ecc_caps was designed as flexible as possible to support
multiple stepsizes (like sunxi_nand.c).

So, we need to write multiple arrays even for the simplest case.
I guess many controllers support a single stepsize, so here is a
shorthand macro for the case.

It allows to describe like ...

NAND_ECC_CAPS_SINGLE(denali_pci_ecc_caps, denali_calc_ecc_bytes, 512, 8, 15);

... instead of

static const int denali_pci_ecc_strengths[] = {8, 15};
static const struct nand_ecc_step_info denali_pci_ecc_stepinfo = {
        .stepsize = 512,
        .strengths = denali_pci_ecc_strengths,
        .nstrengths = ARRAY_SIZE(denali_pci_ecc_strengths),
};
static const struct nand_ecc_caps denali_pci_ecc_caps = {
        .stepinfos = &denali_pci_ecc_stepinfo,
        .nstepinfos = 1,
        .calc_ecc_bytes = denali_calc_ecc_bytes,
};

Signed-off-by: Masahiro Yamada 
Signed-off-by: Boris Brezillon 

[Linux commit: a03c60178c181767ecfb26fb311a88742d228118]

mtd: nand: add generic helpers to check, match, maximize ECC settings

2017-11-28T15:28:59+00:00

Driver are responsible for setting up ECC parameters correctly.
Those include:
  - Check if ECC parameters specified (usually by DT) are valid
  - Meet the chip's ECC requirement
  - Maximize ECC strength if NAND_ECC_MAXIMIZE flag is set

The logic can be generalized by factoring out common code.

This commit adds 3 helpers to the NAND framework:
nand_check_ecc_caps - Check if preset step_size and strength are valid
nand_match_ecc_req - Match the chip's requirement
nand_maximize_ecc - Maximize the ECC strength

To use the helpers above, a driver needs to provide:
  - Data array of supported ECC step size and strength
  - A hook that calculates ECC bytes from the combination of
    step_size and strength.

By using those helpers, code duplication among drivers will be
reduced.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Boris Brezillon 

[Linux commit: 2c8f8afa7f92acb07641bf95b940d384ed1d0294]

mtd: nand: Pass the CS line to ->setup_data_interface()

2017-11-28T15:28:59+00:00

Some NAND controllers can assign different NAND timings to different
CS lines. Pass the CS line information to ->setup_data_interface() so
that the NAND controller driver knows which CS line is concerned by
the setup_data_interface() request.

Signed-off-by: Boris Brezillon 
[Linux commit: 104e442a67cfba4d0cc982384761befb917fb6a1]
Signed-off-by: Masahiro Yamada