The compiler will ignore it anyway:

  include/linux/mtd/mtd.h:342:15: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

The SPI_ADVANCE description does not explain what the switch does.
It does not have anything to do with any advanced functionality, it
only gates off support for stacked and parallel SPI NORs. Rename the
Kconfig symbol, update description, and move it right next to Xilinx
hardware as it seems to be specific to this hardware. Make sure the
symbol is also protected by if DM_SPI in Kconfig.

Fixes: 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>

Move the SR3 bit definition in the right place. Fix
what is likely a rebase artifact. No functional change.

Fixes: 215f1d5794c6 ("mtd: spi-nor: Clear Winbond SR3 WPS bit on boot")
Signed-off-by: Marek Vasut <marex@denx.de>

Some flashes like the Infineon SEMPER NOR flash family use ECC. Under
this ECC scheme, multi-pass writes to an ECC block is not allowed.
In other words, once data is programmed to an ECC block, it can't be
programmed again without erasing it first.

Upper layers like file systems need to be given this information so they
do not cause error conditions on the flash by attempting multi-pass
programming. This can be done by setting 'writesize' in 'struct
mtd_info'.

Set the default to 1 but allow flashes to modify it in fixup hooks. If
more flashes show up with this constraint in the future it might be
worth it to add it to 'struct flash_info', but for now increasing its
size is not worth it.

This patch replicates the following upstream linux commit:
afd473e85827 ("mtd: spi-nor: core: Allow flashes to specify MTD writesize")

Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>

Some Winbond SPI NORs have special SR3 register which is
used among other things to control whether non-standard
"Individual Block/Sector Write Protection" (WPS bit)
locking scheme is activated. This non-standard locking
scheme is not supported by either U-Boot or Linux SPI
NOR stack so make sure it is disabled, otherwise the
SPI NOR may appear locked for no obvious reason.

This SR3 WPS appears e.g. on W25Q16FW which has the same ID as
W25Q16DW, but the W25Q16DW does not implement the SR3 WPS bit.

Signed-off-by: Marek Vasut <marex@denx.de>

In parallel mode, the current implementation assumes that a maximum of
two flashes are connected. The QSPI controller splits the data evenly
between both the flashes so, both the flashes that are connected in
parallel mode should be identical.
During each operation SPI-NOR sets 0th bit for CS0 & 1st bit for CS1 in
nor->flags.

In stacked mode the current implementation assumes that a maximum of two
flashes are connected and both the flashes are of same make but can
differ in sizes. So, except the sizes all other flash parameters of both
the flashes are identical

Spi-nor will pass on the appropriate flash select flag to low level
driver, and it will select pass all the data to that particular flash.

Write operation in parallel mode are performed in page size * 2 chunks as
each write operation results in writing both the flashes. For doubling
the address space each operation is performed at addr/2 flash offset,
where addr is the address specified by the user.

Similarly for read and erase operations it will read from both flashes,
so size and offset are divided by 2 and send to flash.

Adding the config option SPI_ADVANCE for non SPL code.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>

Based on Linux kernel:
commit f922bd798bb9 ("mtd: rawnand: add an option to specify NAND chip as a boot device")

Allow to define a NAND chip as a boot device. This can be helpful
for the selection of the ECC algorithm and strength in case the boot
ROM supports only a subset of controller provided options.

Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Link: https://lore.kernel.org/r/20240826131710.29746-2-avkrasnov@salutedevices.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

MTD block - abstraction over MTD subsystem, allowing
to read and write in blocks using BLK UCLASS.

Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>

Drop all duplicate newlines. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>

As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>