u-boot.git/include/linux, branch v2014.04-rc1

include: delete unused header files

2014-01-24T21:59:07+00:00

Signed-off-by: Masahiro Yamada

Merge branch 'master' of git://git.denx.de/u-boot-arm

2014-01-10T15:56:00+00:00

Bringing in the MMC tree means that CONFIG_BOUNCE_BUFFER needed to be
added to include/configs/exynos5-dt.h now.

Conflicts:
	include/configs/exynos5250-dt.h

Signed-off-by: Tom Rini

add weak entry definition

2014-01-09T15:08:15+00:00

Signed-off-by: David Feng

Add crc8 routine

2014-01-09T00:20:34+00:00

Add an implementation of the CRC8 algorithm. This is required by the TPM
emulation, but is probably useful to U-Boot in general.

Signed-off-by: Simon Glass 

Signed-off-by: Simon Glass 
Reviewed-by: Simon Glass

mtd: move & update nand_ecclayout structure (plus board changes)

2013-11-21T19:32:43+00:00

nand_ecclayout is present in mtd.h at Linux.
Move this structure to mtd.h to comply with Linux.

Also, increase the ecc placement locations to 640 to suport device having
writesize/oobsize of 8KB/640B. This means that the maximum oobsize has gone
up to 640 bytes and consequently the maximum ecc placement locations have
also gone up to 640.

Changes from Prabhabkar's version (squashed into one patch to preserve
bisectability):
 - Added _LARGE to MTD_MAX_*_ENTRIES

   This makes the names match current Linux source, and resolves
   a conflict between
   http://patchwork.ozlabs.org/patch/280488/
   and
   http://patchwork.ozlabs.org/patch/284513/

   The former was posted first and is closer to matching Linux, but
   unlike Linux it does not add _LARGE to the names.  The second adds
   _LARGE to one of the names, and depends on it in a subsequent patch
   (http://patchwork.ozlabs.org/patch/284512/).

 - Made max oobfree/eccpos configurable, and used this on tricorder,
   alpr, ASH405, T4160QDS, and T4240QDS (these boards failed to build
   for me without doing so, due to a size increase).

   On tricorder SPL, this saves 2576 bytes (and makes the SPL build
   again) versus the new default of 640 eccpos and 32 oobfree, and
   saves 336 bytes versus the old default of 128 eccpos and 8 oobfree.

Signed-off-by: Prabhakar Kushwaha 
CC: Vipin Kumar 
[scottwood@freescale.com: changes as described above]
Signed-off-by: Scott Wood 
Cc: Thomas Weber 
Cc: Matthias Fuchs 
Cc: Stefan Roese 
Cc: York Sun 
Cc: Tom Rini 
Reviewed-by: Stefan Roese

include: delete include/linux/config.h

2013-11-08T20:25:13+00:00

Linux Kernel abolished include/linux/config.h long time ago.
(around version v2.6.18..v2.6.19)

We don't need to provide Linux copatibility any more.

This commit deletes include/linux/config.h
and fixes source files not to include this.

Signed-off-by: Masahiro Yamada

usb: am437x: Add support for am437x xhci USB host

2013-10-20T21:42:41+00:00

Add the support for the am437x xhci usb host.

The xHCI host on AM437 is connected to a usb2 phy so need to
add support to enable those clocks.

Signed-off-by: Dan Murphy

usb: dra7xx: Add support for dra7xx xhci USB host

2013-10-20T21:42:41+00:00

Add the support for the dra7xx xhci usb host.
dra7xx does not contain an EHCI controller so the headers
can be removed from the board file.

The xHCI host on dra7xx is connected to a usb2 phy so need to
add support to enable those clocks.

Signed-off-by: Dan Murphy

usb: omap: Move the usb phy code to the usb/phy directory

2013-10-20T21:42:41+00:00

Moving the usb/phy code from xhci-omap to the usb/phy directory
and moving the associated phy code over to the new file.

Newer TI processors adding xHCI support will have different PHY configurations
so therefore abstracting this code away will prevent messing around with the
xhci-omap file itself.

Signed-off-by: Dan Murphy

usb: omap: Move the xhci-omap header file to common location

2013-10-20T21:42:41+00:00

Moving the xhci-omap header to a more global location so that
other code can reference this code.

Signed-off-by: Dan Murphy