u-boot.git/include/mpc83xx.h, branch v2009.01

powerpc: 83xx: add missing TIMING_CFG1_CASLAT_* defines

2008-11-20T00:43:09+00:00

Signed-off-by: Heiko Schocher 
Signed-off-by: Kim Phillips

Make Freescale local bus registers available for both 83xx and 85xx.

2008-10-29T16:12:53+00:00

- Rename lbus83xx_t to fsl_lbus_t and move it to asm/fsl_lbc.h so that it
  can be shared by both 83xx and 85xx
- Remove lbus83xx_t and replace it with fsl_lbus_t in all 83xx boards
  files which use lbus83xx_t.
- Move FMR, FIR, FCR, FPAR, LTESR from mpc83xx.h to asm/fsl_lbc.h so that
  85xx can share them.

Signed-off-by: Jason Jin 
Signed-off-by: Haiying Wang 
Signed-off-by: Scott Wood

mpc83xx: add TSECs' HRCWH masks for MPC837x processors

2008-10-21T23:34:05+00:00

We'll use these masks to parse TSEC modes out of HRCWH.

Signed-off-by: Anton Vorontsov 
Signed-off-by: Kim Phillips

mpc83xx: Fix typo in include/mpc83xx.h

2008-09-24T14:58:34+00:00

Fixed typo from CONIFG_MPC837X to CONFIG_MPC837X

Signed-off-by: Nobuhiro Iwamatsu 
Signed-off-by: Kim Phillips

MPC83XX: Add miscellaneous registers and #defines to support MPC83xx family devices

2008-08-25T22:04:40+00:00

This patch adds elements to the 83xx sysconf structure and #define values that are used
by mpc83xx family devices.

Signed-off-by: Nick Spence 
Signed-off-by: Kim Phillips

NAND boot: MPC8313ERDB support

2008-08-12T16:31:31+00:00

Note that with older board revisions, NAND boot may only work after a
power-on reset, and not after a warm reset.  I don't have a newer board
to test on; if you have a board with a 33MHz crystal, please let me know
if it works after a warm reset.

Signed-off-by: Scott Wood

fdt: add crypto node handling for MPC8{3, 5}xxE processors

2008-07-14T22:01:29+00:00

Delete the crypto node if not on an E-processor.  If on 8360 or 834x family,
check rev and up-rev crypto node (to SEC rev. 2.4 property values)
if on an 'EA' processor, e.g. MPC8349EA.

Signed-off-by: Kim Phillips

83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h

2008-06-10T17:28:08+00:00

This patch moves Freescale Localbus defines out of mpc83xx.h, so we could
use it on MPC85xx and MPC86xx processors.

Signed-off-by: Anton Vorontsov 
Acked-by: Andy Fleming 
Signed-off-by: Kim Phillips

Add missing CSCONFIG_BANK_BIT_3 define to mpc83xx.h

2008-06-10T17:19:04+00:00

Signed-off-by: Tor Krill 
Signed-off-by: Kim Phillips

mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) code

2008-03-28T21:01:06+00:00

in the spirit of commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6,
85xx's "Update SVR numbers to expand support", simplify SPRIDR processing
and processor ID display.  Add REVID_{MAJ,MIN}OR macros to make
REVID dependent code simpler.  Also added PARTID_NO_E and IS_E_PROCESSOR
convenience macros.

Signed-off-by: Kim Phillips