u-boot.git/include/mtd/cfi_flash.h, branch v2016.01

cfi_flash: use specific width types for cword

2015-10-27T10:51:53+00:00

This patch changes the cword union to use specific length types that are
architecture indepented.

This patch also renames the members of the cword union to represent
their usage, i.e.:

    c  -> w8
    s  -> w16
    l  -> w32
    ll -> w64

Where "w" stands for "width" in bits.

I discovered this problem when enabling CFI flash on vexpress64.
cword.l was an unsigned long int, but it was intended to be 32 bits wide.
Unfortunately, it's 64-bits wide on a 64-bit system, meaning that a
64-bit system fails when attempting to use 32-bit wide CFI flash parts.

Similar problems also existed with the other cword sizes.

Signed-off-by: Ryan Harkin 
Reviewed-by: Linus Walleij 
Signed-off-by: Stefan Roese

cfi_flash: Add prototypes of overridable functions

2013-07-30T07:11:54+00:00

This commit adds some prototypes into include/mtd/cfi_flash.h.
These functions are defined with a weak attribute in
drivers/mtd/cfi_flash.c.
This means they can be overrided by board-specific ones
if necessary.

When defining such functions under board/ directory or
somewhere, cfi_flash.h should be included.
This makes sure that board-specfic cfi functions
are defined in a correct prototype.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Stefan Roese

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38+00:00

Signed-off-by: Wolfgang Denk 
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini

cfi_flash: Fix unaligned accesses to cfi_qry structure

2013-05-23T07:47:59+00:00

Packed structure cfi_qry contains unaligned 16- and 32-bits members,
accessing which causes problems when cfi_flash driver is compiled with
-munaligned-access option: flash initialization hangs, probably
due to data error.

Since the structure is supposed to replicate the actual data layout
in CFI Flash chips, the alignment issue can't be fixed in the structure.
So, unaligned fields need using of explicit unaligned access macros.

Signed-off-by: Andrew Gabbasov 
Reviewed-By: Albert ARIBAUD 
Signed-off-by: Stefan Roese

Revert "mtd: cfi_flash: Fix CFI flash driver for 8-bit bus support"

2013-04-12T17:04:54+00:00

This reverts commit 239cb9d904cfa8ab50d840a47b3306189d695c75.

Signed-off-by: Stefan Roese

mtd: cfi_flash: Fix CFI flash driver for 8-bit bus support

2013-04-02T12:27:45+00:00

This commit is based on that patch from aaron.williams@caviumnetworks.com
with same commit title. pulled the same code changes into current u-boot tree.

http://patchwork.ozlabs.org/patch/140863/
http://lists.denx.de/pipermail/u-boot/2011-April/089606.html

This patch corrects the addresses used when working with Spansion/AMD FLASH chips.
Addressing for 8 and 16 bits is almost identical except in the 16-bit case the
LSB of the address is always 0.  The confusion arose because the addresses
in the datasheet for 16-bit mode are word addresses but this code assumed it was
byte addresses.

I have only been able to test this on our Octeon boards which use either an 8-bit
or 16-bit bus.  I have not tested the case where there's an 8-bit part on a 16-bit
bus.

This patch also adds some delays as suggested by Spansion.

If a part can be both 8 and 16-bits, it forces it to work in 8-bit mode if an
8-bit bus is detected.

Apart from the pulled changes, fixed few minor code cleanups and tested
on 256M29EW, 512M29EW flashes.

Before this fix:
---------------
Bank # 1: CFI conformant flash (8 x 8)  Size: 64 MB in 512 Sectors
  AMD Standard command set, Manufacturer ID: 0xFF, Device ID: 0xFF
  Erase timeout: 4096 ms, write timeout: 2 ms
  Buffer write timeout: 5 ms, buffer size: 1024 bytes

After this fix:
--------------
Bank # 1: CFI conformant flash (8 x 8)  Size: 64 MB in 512 Sectors
  AMD Standard command set, Manufacturer ID: 0x89, Device ID: 0x7E2301
  Erase timeout: 4096 ms, write timeout: 2 ms
  Buffer write timeout: 5 ms, buffer size: 1024 bytes

Signed-off-by: Aaron Williams 
Signed-off-by: Jagannadha Sutradharudu Teki 
Tested-by: Jagannadha Sutradharudu Teki

cfi_flash: add support for Spansion flash PPB sector protection

2012-08-13T12:34:35+00:00

Erasing flash sectors protected with persistent protection bit (PPB)
mechanism on Spansion flash chips doesn't work. Add sector protection
status checking and sector lock and unlock commands to fix this.

Signed-off-by: Anatolij Gustschin 
Cc: Stefan Roese 
Signed-off-by: Stefan Roese

cfi_flash: Add optional config register write to cfi-detection

2010-12-17T08:56:05+00:00

This patch adds the possibility to (optinally) write to the
flash configuration register. The Intel style CFI chips support
such a register that can be used to configure the operation
mode to a non-default value.

This method will be used by the t3corp board, which needs to
configure the DS617 Xilinx flash for async read mode.

Signed-off-by: Stefan Roese

cfi_flash: Simplify dynamic flash bank number detection

2010-09-20T13:08:51+00:00

This patch simplifies the use of CONFIG_SYS_MAX_FLASH_BANKS_DETECT. By
moving these optional variables and defines into the common code, board
specific code is minimized. Currently only the following board use
this feature:

APC405, IDS8247, TQM834x

And IDS8247 doesn't seem to really need this feature, since its not
updating the bank number variable at all. So this patch removes the
definition of CONFIG_SYS_MAX_FLASH_BANKS_DETECT from this board port.

This new framework will be used by the upcoming lwmon5 update as well.

Signed-off-by: Stefan Roese 
Acked-by: Heiko Schocher 
Cc: Matthias Fuchs

cfi: Add weak default function for flash_cmd_reset()

2009-10-28T10:34:14+00:00

Currently the CFI driver issues both AMD and Intel reset commands.
This is because the driver doesn't know yet which chips are connected.
This dual reset seems to cause problems with the M29W128G chips as
reported by Richard Retanubun. This patch now introduces a weak default
function for the CFI reset command, still with both resets. This can
be overridden by a board specific version if necessary.

Signed-off-by: Stefan Roese 
Cc: Richard Retanubun