u-boot.git/include/netdev.h, branch u-boot-2013.01.y Unnamed repository; edit this file 'description' to name the repository. mv88e61xx: refactor PHY and SWITCH level-code 2013-01-08T22:42:10+00:00 Albert ARIBAUD albert.u.boot@aribaud.net 2012-11-26T11:27:35+00:00 0a16ea593355d1a0fd415286089961f9c9ad1614 Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> 
Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
net: Add driver for Zynq Gem IP 2012-09-26T17:36:32+00:00 Michal Simek monstr@monstr.eu 2012-09-13T20:23:34+00:00 185f7d9afc9b5c77bbedc386a43019e07e5d0c04 Device driver for Zynq Gem IP. Signed-off-by: Michal Simek <monstr@monstr.eu> CC: Joe Hershberger <joe.hershberger@gmail.com> CC: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de> 
Device driver for Zynq Gem IP.

Signed-off-by: Michal Simek <monstr@monstr.eu>
CC: Joe Hershberger <joe.hershberger@gmail.com>
CC: Marek Vasut <marex@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
SPEAr: Add interface information in initialization 2012-07-07T12:07:40+00:00 Vipin Kumar vipin.kumar@st.com 2012-05-07T07:36:44+00:00 9afc1af01f2d4b033e0da5df105b399949976a12 Few Designware peripheral registers need to be modified based on the ethernet interface selected by the board. This patch supports interface information in ethernet driver Signed-off-by: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Amit Virdi <amit.virdi@st.com> Signed-off-by: Stefan Roese <sr@denx.de> 
Few Designware peripheral registers need to be modified based on the
ethernet interface selected by the board. This patch supports interface
information in ethernet driver

Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Amit Virdi <amit.virdi@st.com>
Signed-off-by: Stefan Roese <sr@denx.de>
net: ll_temac: Add LL TEMAC driver to u-boot 2012-04-04T14:36:19+00:00 Stephan Linz linz@li-pro.net 2012-02-25T00:48:31+00:00 df48265036dc7332d488ded34aa298f7f5bf3513 Xilinx LocalLink Tri-Mode Ether MAC driver can be used by Xilinx Microblaze or Xilinx ppc405/440 in SDMA and FIFO mode. DCR or XPS bus can be used. The driver uses and requires MII and PHYLIB. CP: 4 warnings: 'Use of volatile is usually wrong' I won't fix this, because it depends on the network driver subsystem. Reported-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Stephan Linz <linz@li-pro.net> 
Xilinx LocalLink Tri-Mode Ether MAC driver can be
used by Xilinx Microblaze or Xilinx ppc405/440 in
SDMA and FIFO mode. DCR or XPS bus can be used.

The driver uses and requires MII and PHYLIB.

CP: 4 warnings: 'Use of volatile is usually wrong'
I won't fix this, because it depends on the network
driver subsystem.

Reported-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Stephan Linz <linz@li-pro.net>
net: add Calxeda xgmac driver 2012-01-05T19:10:38+00:00 Rob Herring rob.herring@calxeda.com 2011-12-15T11:15:49+00:00 efdd731957caff85db619636a972b7f5404ea9b4 This adds ethernet driver for Calxeda xgmac found on Highbank SOC. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Fix: WARNING: __aligned(size) is preferred over __attribute__((aligned(size))) Signed-off-by: Wolfgang Denk <wd@denx.de> 
This adds ethernet driver for Calxeda xgmac found on Highbank SOC.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>

Fix: WARNING: __aligned(size) is preferred over
__attribute__((aligned(size)))
Signed-off-by: Wolfgang Denk <wd@denx.de>
ne2000: Convert to new net-multi model, fixes build of three boards 2011-12-08T21:22:03+00:00 Bernhard Kaindl bernhard.kaindl@gmx.net 2011-10-20T10:56:59+00:00 d0201692988adc5d8cdbbf5e0cbf47e1a09708aa This fixes the build of the two sh boards shmin and r7780mp and qemu-mips which currently fail to build due to dropped pre-CONFIG_NET_MULTI code. This v2 patch minimizes the number of lines in the diff for easy review and to eliminate any possible accidential changes resulting from moving lines of code in the file. This also makes the register function very easy. Any cleanups and improvements are intentionally deferred to follow-up patches to keep this patch as simple and as easy to review as possible. A new driver register function, ne2k_register() calls the existing one-time setup part of the old init function and calls eth_register(). Changes to shmin, r7780mp and qemu-mips: - Call the new ne2k_register() from board_eth_init() of the boards. - Tested using qemu-mips board, - Tested the two renesas / sh boards r7780mp and shmin to compile again, and should work. checkpatch-clean when "--ignore VOLATILE" is added to .checkpatch.conf, and no warnings introduced in none of the three boards using this driver. Signed-off-by: Bernhard Kaindl <bernhard.kaindl@gmx.net> 
This fixes the build of the two sh boards shmin and r7780mp and qemu-mips
which currently fail to build due to dropped pre-CONFIG_NET_MULTI code.

This v2 patch minimizes the number of lines in the diff for easy review
and to eliminate any possible accidential changes resulting from moving
lines of code in the file. This also makes the register function very easy.

Any cleanups and improvements are intentionally deferred to follow-up patches
to keep this patch as simple and as easy to review as possible.

A new driver register function, ne2k_register() calls the existing
one-time setup part of the old init function and calls eth_register().

Changes to shmin, r7780mp and qemu-mips:
- Call the new ne2k_register() from board_eth_init() of the boards.

- Tested using qemu-mips board,
- Tested the two renesas / sh boards r7780mp and shmin to compile again,
  and should work.

checkpatch-clean when "--ignore VOLATILE" is added to .checkpatch.conf,
and no warnings introduced in none of the three boards using this driver.

Signed-off-by: Bernhard Kaindl <bernhard.kaindl@gmx.net>
altera_tse: Add support for dedicated descriptor memory 2011-10-26T19:27:37+00:00 Joachim Foerster joachim.foerster@missinglinkelectronics.com 2011-10-17T05:24:44+00:00 b962ac794a26ff80269755c13c3e4fee65c3809e Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com> 
Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com>
net: emaclite: Move RX/TX ping pong initialization to 2011-10-23T21:32:44+00:00 Michal Simek monstr@monstr.eu 2011-10-12T23:23:22+00:00 c1044a1ec182be4c9c0b64d42ac9bf8f623d3f68 Init RX/TX ping pong directly from board not in the driver. Signed-off-by: Michal Simek <monstr@monstr.eu> 
Init RX/TX ping pong directly from board not in the driver.

Signed-off-by: Michal Simek <monstr@monstr.eu>
net: emaclite: Use unsigned long for baseaddr 2011-10-23T21:32:44+00:00 Michal Simek monstr@monstr.eu 2011-10-12T23:23:21+00:00 9b94755af9552ce3cbecfdd2f9f1fa2b322d825a Baseaddr should be unsigned long. Signed-off-by: Michal Simek <monstr@monstr.eu> 
Baseaddr should be unsigned long.

Signed-off-by: Michal Simek <monstr@monstr.eu>
net: axi_ethernet: Add driver to u-boot 2011-10-15T20:12:05+00:00 Michal Simek monstr@monstr.eu 2011-10-06T20:35:35+00:00 4f1ec4c176810bbc60e7142336b2bd74eac3bec1 Add axi_ethernet driver for little-endian Microblaze. RX/TX BDs and rxframe buffer are shared among all axi_ethernet MACs. Only one MAC can work in one time. Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Mike Frysinger <vapier@gentoo.org> 
Add axi_ethernet driver for little-endian Microblaze.

RX/TX BDs and rxframe buffer are shared among all axi_ethernet MACs.
Only one MAC can work in one time.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Mike Frysinger <vapier@gentoo.org>