Richard Genoud <richard.genoud@bootlin.com> says:

SquashFS has support in U-Boot, but not in SPL.

This series adds the possibility for the SPL to load files from SquashFS
partitions.
This is useful, for instance, when there's a SquashFS rootfs containing
U-Boot binary.

NB: falcon mode is not supported yet.

Link: https://lore.kernel.org/r/20260313104229.1555236-1-richard.genoud@bootlin.com

Implement spl_load_image_sqfs() in spl code.

This will be used in MMC to read a file from a squashfs partition.

Also, loosen squashfs read checks on file size by not failing when a
bigger size than the actual file size is requested. (Just read the file)
This is needed for FIT loading, because the length is ALIGNed.

Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: João Marcos Costa <joaomarcos.costa@bootlin.com>

Refactor the part_get_info_extended() helper function (which already
recursively traverses DOS partitions) to optionally return the raw MBR
partition structure (dos_partition_t).

This allows other subsystems, such as EFI, to retrieve the partition
details in the legacy MBR format.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

This pull request brings together a set of fixes and enhancements across
the SoCFPGA platform family, with a focus on MMC/SPL robustness, EFI
boot enablement, and Agilex5 SD/eMMC support.

CI: https://source.denx.de/u-boot/custodians/u-boot-socfpga/-/pipelines/28776

Highlights:

  *
    SPL / MMC:
      o
        Fix Kconfig handling for
        SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
      o
        Correct raw sector calculations and respect explicit sector values
        when loading U-Boot from MMC in SPL
      o
        Adjust raw MMC loading logic for SoCFPGA platforms
  *
    EFI boot:
      o
        Permit EFI booting on SoCFPGA platforms
      o
        Disable mkeficapsule tool build for Arria 10 where unsupported
  *
    Agilex5:
      o
        Upgrade SDHCI controller from SD4HC to SD6HC
      o
        Enable MMC and Cadence SDHCI support in defconfig
      o
        Add dedicated eMMC device tree and defconfig for Agilex5 SoCDK
      o
        Revert incorrect GPIO configuration for SDIO_SEL
      o
        Refine U-Boot DT handling for SD and eMMC boot variants
  *
    SPI:
      o
        Allow disabling the DesignWare SPI driver in SPL via Kconfig
  *
    Board / configuration fixes:
      o
        Enable random MAC address generation for Cyclone V
      o
        Fix DE0-Nano-SoC boot configuration
      o
        Remove obsolete or conflicting options from multiple legacy
        SoCFPGA defconfigs

Add SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE as condition where so
far SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION was enough - though often
by chance as both options were enabled.

Reorder the #ifdef blocks at this chance to follow the order in the
Kconfig menu.

Fixes: 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>

Not all ->get_info implementations necessarily populate all the string
members of struct disk_partition.

Currently, only part_get_info_by_type() (and thereby part_get_info)
ensure that the uuid strings are initialized; part_get_info_by_type()
and part_get_info_by_uuid() do not. In fact, the latter could lead to
a false positive match - if the ->get_info backend does not populate
info->uuid, stale contents in info could cause the strncasecmp() to
succeed.

None of the functions currently ensure that the ->name and ->type
strings are initialized.

Instead of forcing all callers of any of these functions to
pre-initialize info, or all implementations of the ->get_info method
to ensure there are valid C strings in all four fields, create a small
helper function and factor all invocations of ->get_info through that.

This also consolidates the -ENOSYS check and standardizes on using
log_debug() for reporting absence, instead of the current mix of
PRINTF and log_debug(). It does mean we have to special-case -ENOSYS
in the error cases inside the loops in the _by_uuid() and _by_name()
functions, but it's still a net win in #LOC.

Acked-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Tested-by: Anshul Dalal <anshuld@ti.com>

Make part_driver_lookup_type non-static so it can be used outside
part.c. This allows external callers to determine the appropriate
partition driver for a block device, enabling more flexible handling of
partition types.

Add a prototype and kernel-doc comment in part.h to document the
function contract. Provide a stub inline implementation returning NULL
when partition support is disabled, ensuring build consistency across
configurations.

Signed-off-by: Javier Tia <javier.tia@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

This file does not need <linker_lists.h> so remove it.

Signed-off-by: Tom Rini <trini@konsulko.com>

This function will be used by the EFI application disk support code
to provide data required by the EFI_PARTITION_INFORMATION_PROTOCOL.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

Tom Rini <trini@konsulko.com> says:

Hey all,

Related to my other series I've posted recently on cleaning up some
headers, this series here is the result of at least lightly auditing the
#includes used in include/[a-m]*.h. This ignores subdirectories, as at
least in part I think the top-level includes we've constructed are the
most likely places to have some extra transitive include paths. I'm sure
there's exceptions and I'll likely audit deeper once this first pass is
done. This only gets as far as "include/m*.h" because I didn't want this
to get too big. This also sets aside <miiphy.h> and <phy.h>. While
miiphy.h does not directly need <phy.h> there are *so* many users and I
think I had half of the tree just about not building when I first tried.
It might be worth further investigation, but it might just be OK as-is.

Link: https://lore.kernel.org/r/20250521230119.2084088-1-trini@konsulko.com