u-boot.git/include/pci.h, branch master Unnamed repository; edit this file 'description' to name the repository. pci: Add support for Qualcomm PCIe controller 2025-01-22T15:43:54+00:00 Neil Armstrong neil.armstrong@linaro.org 2024-11-25T09:46:17+00:00 5b7ec7fb4437e3e9b50127114a59796a90c1681a Add support for the PCIe busses on Qualcomm platforms, by using the pcie_dw_common infrastructure. The driver is based on the Linux driver but only supporting the "1_9_0" and compatible platforms like: - sa8540p - sc7280 - sc8180x - sc8280xp - sdm845 - sdx55 - sm8150 - sm8250 - sm8350 - sm8450 - sm8550 - sm8650 - x1e80100 But it has only been tested on: - sc7280 - sm8550 - sm8650 - x1e80100 It supports setting the IOMMU SID table for supported platforms. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20241125-topic-pcie-controller-v1-2-45c20070dd53@linaro.org Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> 
Add support for the PCIe busses on Qualcomm platforms,
by using the pcie_dw_common infrastructure.

The driver is based on the Linux driver but only supporting
the "1_9_0" and compatible platforms like:
- sa8540p
- sc7280
- sc8180x
- sc8280xp
- sdm845
- sdx55
- sm8150
- sm8250
- sm8350
- sm8450
- sm8550
- sm8650
- x1e80100

But it has only been tested on:
- sc7280
- sm8550
- sm8650
- x1e80100

It supports setting the IOMMU SID table for supported platforms.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241125-topic-pcie-controller-v1-2-45c20070dd53@linaro.org
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
include: Remove duplicate newlines 2024-07-29T21:01:04+00:00 Marek Vasut marek.vasut+renesas@mailbox.org 2024-07-22T23:28:34+00:00 6627fbba203f89a316299d35f6a2ff3f33dd15c8 Drop all duplicate newlines. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> 
Drop all duplicate newlines. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet" 2024-05-20T19:35:03+00:00 Tom Rini trini@konsulko.com 2024-05-20T19:35:03+00:00 03de305ec48b0bb28554372abb40ccd46dbe0bf9 As part of bringing the master branch back in to next, we need to allow for all of these changes to exist here. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> 
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" 2024-05-19T14:16:36+00:00 Tom Rini trini@konsulko.com 2024-05-19T02:20:43+00:00 d678a59d2d719da9e807495b4b021501f2836ca5 When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> 
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
pci.h: Add missing <linux/types.h> 2024-05-06T21:05:03+00:00 Tom Rini trini@konsulko.com 2024-04-27T14:10:50+00:00 6fa4850c95c731cc53550da9233c7144a8fdb7c5 This file has many "Linux" style types in it, add <linux/types.h> Signed-off-by: Tom Rini <trini@konsulko.com> 
This file has many "Linux" style types in it, add <linux/types.h>

Signed-off-by: Tom Rini <trini@konsulko.com>
drivers: pci: Fix dm_pci_map_bar() to support 64b BARs 2024-01-19T01:24:13+00:00 Moritz Fischer moritzf@google.com 2024-01-10T04:59:02+00:00 040834703497bafb81fce88a92d8e54c8837fcaa This enables 64b BARs if CONFIG_SYS_PCI_64BIT is enabled. Reviewed-by: Philip Oberfichtner <pro@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Moritz Fischer <moritzf@google.com> 
This enables 64b BARs if CONFIG_SYS_PCI_64BIT is enabled.

Reviewed-by: Philip Oberfichtner <pro@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Moritz Fischer <moritzf@google.com>
cmd: pci: Add command to set MPS of all PCIe devices 2023-03-30T19:09:59+00:00 Stephen Carlson stcarlso@linux.microsoft.com 2023-03-10T19:07:13+00:00 59b1c9be01934222cf773b35de7c8d086dabaef6 Enable tuning of the PCI Express MPS (Maximum Payload Size) of each device. The Maximum Read Request Size is not altered. The SAFE method uses the largest MPS value supported by all devices in the system for each device. This method is the same algorithm as used by Linux pci=pcie_bus_safe. The PEER2PEER method sets all devices to the minimal (128 byte) MPS, which allows hot plug of devices later that might only support the minimum size, and ensures compatibility of DMA between two devices on the bus. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com> 
Enable tuning of the PCI Express MPS (Maximum Payload Size) of
each device. The Maximum Read Request Size is not altered.

The SAFE method uses the largest MPS value supported by all devices in the
system for each device. This method is the same algorithm as used by Linux
pci=pcie_bus_safe.

The PEER2PEER method sets all devices to the minimal (128 byte) MPS, which
allows hot plug of devices later that might only support the minimum size,
and ensures compatibility of DMA between two devices on the bus.

Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
dm: pci: Fix doc typo first -> next 2022-10-29T13:36:33+00:00 Michal Suchanek msuchanek@suse.de 2022-09-27T21:25:24+00:00 1fcfadcb82a21af058baa5dea2b20883b8c388b8 pci_find_first_device description says it can be used for iteration with itself but it should really be with pci_find_next_device Signed-off-by: Michal Suchanek <msuchanek@suse.de> 
pci_find_first_device description says it can be used for iteration with
itself but it should really be with pci_find_next_device

Signed-off-by: Michal Suchanek <msuchanek@suse.de>
pci: Add mask parameter to dm_pci_map_bar() 2022-05-03T22:33:29+00:00 Andrew Scull ascull@google.com 2022-04-21T16:11:13+00:00 2635e3b50f8e646fc54c2bb15a017dea61a64a68 Add a mask parameter to control the lookup of the PCI region from which the mapping can be made. Signed-off-by: Andrew Scull <ascull@google.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> 
Add a mask parameter to control the lookup of the PCI region from which
the mapping can be made.

Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
pci: Update dm_pci_bus_to_virt() parameters 2022-05-03T22:33:29+00:00 Andrew Scull ascull@google.com 2022-04-21T16:11:12+00:00 a822d1dee4e2a6a035c464426e56d1e5c600d273 Add mask parameter and reorder length parameter to match the other PCI address conversion functions. Using PCI_REGION_TYPE as the mask gives the old behaviour. It's converted from a macro to an inline function as the length parameter is now used twice, but should only be calculated once. Signed-off-by: Andrew Scull <ascull@google.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> 
Add mask parameter and reorder length parameter to match the other PCI
address conversion functions. Using PCI_REGION_TYPE as the mask gives
the old behaviour.

It's converted from a macro to an inline function as the length
parameter is now used twice, but should only be calculated once.

Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>