u-boot.git/include/pci_ids.h, branch v2012.07

Update pci_ids.h from current Linux sources

2011-12-09T16:28:29+00:00

This change copies over the pci_ids.h file from Linux verbatim, plus a few
ids that had been added by hand. The last non-merge change hash in that
file in the kernel repository was:

8930c8aa740b12ad69f44a35137bcc39bfa3dc41

and the kernel was at version 2.6.38.

Signed-off-by: Gabe Black 
Acked-by: Mike Frysinger 
[agust@denx.de: updated to preserve used PCI IDs]
Signed-off-by: Anatolij Gustschin

drivers: add the support for Silicon Image SATA controller

2011-10-21T23:03:54+00:00

Add the Silicon Image series PCI Express to
Serial ATA controller support, including Sil3132,
Sil3131 and Sil3124.
The SATA controller can be used to load kernel.

The features list:
	- Supports 1-lane 2.5 Gbit/s PCI Express
	- Supports one/two/four independent Serial ATA channels
	- Supports Serial ATA Generation 2 transfer rate of 3.0 Gbit/s
	- Supports LBA28 and LBA48

Signed-off-by: Tang Yuantian 
Signed-off-by: Aaron Williams 
Tested-by: Lan Chunhe

Net: Add Intel E1000 82574L PCIe card support

2011-04-11T20:20:13+00:00

Add Intel E1000 82574L PCIe card support. Test on MPC8544DS
and MPC8572 board.
Add the missing contact information for future support.

Signed-off-by: Roy Zang 
Acked-by: Kumar Gala

Added PCI_DEVICE_ID_PLX_9030.

2010-11-28T21:48:45+00:00

Added PCI device ID for the PLXTech PCI 9030 bridge.

Signed-off-by: Horst Kronstorfer

video: sm501: add support for SM501 chips on PCI bus

2010-06-14T10:29:26+00:00

Signed-off-by: Anatolij Gustschin

net: e1000: Add support for the Intel 82546GB controller

2009-12-14T05:52:30+00:00

This chip is equipped for example on the esd PMC-ETH2-GB board. So let's
add it to the list of supported chips to the e1000 driver.

Signed-off-by: Reinhard Arlt 
Signed-off-by: Stefan Roese 
Signed-off-by: Ben Warren

Add Intel E1000 PCIE card support

2009-08-08T09:26:05+00:00

Based on Intel PRO/1000 Network Driver 7.3.20-k2
  Add Intel E1000 PCIE card support. The following cards are added:
  INTEL_82571EB_COPPER
  INTEL_82571EB_FIBER,
  INTEL_82571EB_SERDES
  INTEL_82571EB_QUAD_COPPER
  INTEL_82571PT_QUAD_COPPER
  INTEL_82571EB_QUAD_FIBER
  INTEL_82571EB_QUAD_COPPER_LOWPROFILE
  INTEL_82571EB_SERDES_DUAL
  INTEL_82571EB_SERDES_QUAD
  INTEL_82572EI_COPPER
  INTEL_82572EI_FIBER
  INTEL_82572EI_SERDES
  INTEL_82572EI
  INTEL_82573E
  INTEL_82573E_IAMT
  INTEL_82573L
  INTEL_82546GB_QUAD_COPPER_KSP3
  INTEL_80003ES2LAN_COPPER_DPT
  INTEL_80003ES2LAN_SERDES_DPT
  INTEL_80003ES2LAN_COPPER_SPT
  INTEL_80003ES2LAN_SERDES_SPT

 82571EB_COPPER dual ports,
 82572EI single port,
 82572EI_COPPER single port PCIE cards
 and
 82545EM_COPPER,
 82541GI_LF
 pci cards are tested on both  P2020 board
 and MPC8544DS board.

 Signed-off-by: Roy Zang 

Signed-off-by: Ben Warren

Add ESD PCI vendor ID

2009-07-10T23:02:20+00:00

Signed-off-by: Matthias Fuchs

mpc85xx: Add support for the MPC8536

2008-08-27T16:43:54+00:00

The MPC8536 Adds SDHC and SATA controllers to the PQ3 family.  We
also have SERDES init code for the 8536.

Signed-off-by: Kumar Gala 
Signed-off-by: Srikanth Srinivasan 
Signed-off-by: Dejan Minic 
Signed-off-by: Jason Jin 
Signed-off-by: Dave Liu

e1000: add support for 82545GM 64bit PCI-X copper variant

2008-07-09T22:52:48+00:00

This PCI-X e1000 variant works by just adding in the correct
PCI IDs in the appropriate places.

Signed-off-by: Paul Gortmaker