u-boot.git/include/phy.h, branch v2015.04-rc4 Unnamed repository; edit this file 'description' to name the repository. phylib: add support for aquantia PHYs 2015-01-16T17:32:11+00:00 Shaohui Xie Shaohui.Xie@freescale.com 2014-12-30T10:32:04+00:00 f7c38cf827a0cf9d5ab4ca60131dffa10a2e4309 This patch supports AQ1202, AQ2104, AQR105 PHY. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com> 
This patch supports AQ1202, AQ2104, AQR105 PHY.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: York Sun <yorksun@freescale.com>
net/phy: Add support for CS4315/CS4340 PHY 2014-12-05T16:06:11+00:00 Shengzhou Liu Shengzhou.Liu@freescale.com 2014-11-10T10:32:29+00:00 9b18e5199ec42f9dc62c0da7f4fe7554e199980d Add support for Cortina CS4315/CS4340 10G PHY. - This driver loads CS43xx firmware from NOR/NAND/SPI/SD device to initialize Cortina PHY. - Cortina PHY has non-standard offset of PHY ID registers, thus we define own get_phy_id() to override default get_phy_id(). - To define macro CONFIG_PHY_CORTINA will enable this driver. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> 
Add support for Cortina CS4315/CS4340 10G PHY.
- This driver loads CS43xx firmware from NOR/NAND/SPI/SD device
  to initialize Cortina PHY.
- Cortina PHY has non-standard offset of PHY ID registers, thus
  we define own get_phy_id() to override default get_phy_id().
- To define macro CONFIG_PHY_CORTINA will enable this driver.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
net/fm: add 2.5G SGMII support 2014-11-20T02:17:12+00:00 Shengzhou Liu Shengzhou.Liu@freescale.com 2014-10-23T09:20:57+00:00 c35f8693942d8284c635592f263a0fe11abe1d1d As auto-negotiation is not supported for 2.5G SGMII, we need to add a new type PHY_INTERFACE_MODE_SGMII_2500 to differentiate SGMII-1G and SGMII-2.5G with different setting for auto-negotiation. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> 
As auto-negotiation is not supported for 2.5G SGMII, we need
to add a new type PHY_INTERFACE_MODE_SGMII_2500 to differentiate
SGMII-1G and SGMII-2.5G with different setting for auto-negotiation.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
net: phy.h: Make PHY autonegotiation timeout configurable 2014-10-23T13:59:21+00:00 Stefan Roese sr@denx.de 2014-10-22T10:13:15+00:00 4fb3f0c8024bb1464364eecc9c7708ecf6119e35 The Marvell MV78460 eval board DB-78460-BP seems to need a longer PHY autonegotiation timeout than the "standard" 4 seconds. So lets make this timeout configurable. If not defined in the board config header the original 4000ms is used. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> 
The Marvell MV78460 eval board DB-78460-BP seems to need a longer
PHY autonegotiation timeout than the "standard" 4 seconds. So lets
make this timeout configurable. If not defined in the board config
header the original 4000ms is used.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Change Andy Fleming's email address 2014-08-06T13:12:30+00:00 Andy Fleming afleming@gmail.com 2014-07-25T22:39:08+00:00 b21f87a3e02461c600f1c172b053f1530a532d90 Messages to afleming@freescale.com now bounce, and should be directed to my personal address at afleming@gmail.com Signed-off-by: Andy Fleming <afleming@gmail.com> 
Messages to afleming@freescale.com now bounce, and should be
directed to my personal address at afleming@gmail.com

Signed-off-by: Andy Fleming <afleming@gmail.com>
wandboard: Fix sparse warning 2014-03-05T11:23:48+00:00 Fabio Estevam fabio.estevam@freescale.com 2014-02-15T16:52:00+00:00 2fb639646d64882229f0870d0791746791124c45 Add a prototype for board_phy_config() to fix the following sparse warning: wandboard.c:200:5: warning: symbol 'board_phy_config' was not declared. Should it be static? Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> 
Add a prototype for board_phy_config() to fix the following sparse warning:

wandboard.c:200:5: warning: symbol 'board_phy_config' was not declared. Should it be static?

Cc: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2013-12-02T13:38:28+00:00 Tom Rini trini@ti.com 2013-12-02T13:38:28+00:00 77fdd6d1eb69c1194148a9f4b4428d903af3619f 






net: add extended function to phy API
2013-11-22T22:50:52+00:00

Stefano Babic
sbabic@denx.de

2013-09-02T13:42:30+00:00

b71841b978fc33f961383b255693a70a1dd64031

Some phys (Micrel) has extended registers that must be
accessed in a special way. Add pointers to the phy driver
structure to allow to use these functions with mdio command.

Signed-off-by: Stefano Babic <sbabic@denx.de>





Some phys (Micrel) has extended registers that must be
accessed in a special way. Add pointers to the phy driver
structure to allow to use these functions with mdio command.

Signed-off-by: Stefano Babic <sbabic@denx.de>







phy: introduce structure fixed-link
2013-11-22T20:43:36+00:00

Shaohui Xie
Shaohui.Xie@freescale.com

2013-11-14T11:00:31+00:00

f55a776cd03243aa575d3126996f11986e61a16b

fixed-link is used in kernel for PHY-less MAC, so introduce this
structure that U-boot can use it to fixup dtb dynamically.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>





fixed-link is used in kernel for PHY-less MAC, so introduce this
structure that U-boot can use it to fixup dtb dynamically.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>







Add GPL-2.0+ SPDX-License-Identifier to source files
2013-07-24T13:44:38+00:00

Wolfgang Denk
wd@denx.de

2013-07-08T07:37:19+00:00

1a4596601fd395f3afb8f82f3f840c5e00bdd57a

Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>





Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>