u-boot.git/include/phy.h, branch v2025.01

net: phy: Replace PHY_ANEG_TIMEOUT with Kconfig symbol

2024-06-13T22:27:07+00:00

Switch PHY_ANEG_TIMEOUT to CONFIG_PHY_ANEG_TIMEOUT Kconfig symbol.
This removes one more configuration headers option finalizes its
Kconfig symbol conversion. No functional change expected.

Signed-off-by: Marek Vasut

net: phy: Turn default auto-negotiation timeout into Kconfig symbol

2024-06-13T22:27:06+00:00

Let users configure default auto-negotiation timeout via Kconfig
instead of specifying it in board configuration headers. This is
the first step toward converting this to Kconfig fully, so far the
legacy PHY_ANEG_TIMEOUT in configuration headers takes precedence.

Signed-off-by: Marek Vasut

net: phy: Factor out PHY GPIO reset code

2024-03-26T23:58:26+00:00

Pull the PHY GPIO reset code into separate function, since
this is and will be reused multiple times. Set up default
reset assert and deassert timing to generous 20ms and 1ms
for maximum compatibility in case those DT properties are
missing.

Reviewed-by: Ramon Fried 
Signed-off-by: Marek Vasut

net: mdio: Handle bus level GPIO Reset

2024-03-07T12:59:16+00:00

Some platforms have bus level Reset controlled
by a GPIO line. If available then handle bus reset
via GPIO.

Signed-off-by: Roger Quadros

net: phy: nxp-c45-tja11xx: use local definion of features

2024-02-08T02:41:23+00:00

Use a local definition for the PHY features. PHY_100BT1_FEATURES are
not defined using the 100BaseT1 bit, so keep this workaround in the driver.

Signed-off-by: "Radu Pirea (NXP OSS)"

net: phy: Remove unused NEEDS_MANUAL_RELOC code bits

2023-09-14T14:42:25+00:00

The last user of the NEEDS_MANUAL_RELOC has been removed in commit
26af162ac8f8 ("arch: m68k: Implement relocation")
Remove now unused NEEDS_MANUAL_RELOC code.

Signed-off-by: Marek Vasut

net: phy: Unpublish phy_connect_dev()

2023-06-10T11:34:05+00:00

The phy_connect_dev() is legacy API, now that there are no users,
make it internal to phy.c and unpublish it from headers.

Signed-off-by: Marek Vasut 
Reviewed-by: Ramon Fried

net: phy: Make phy_interface_is_rgmii a switch statement

2023-05-05T21:48:44+00:00

Recent commit 75d28899e3e9 ("net: phy: Synchronize PHY interface modes
with Linux") reordered the enum definitions. This exposed a problem
in range checking functions to identify the interface type. Though
this specific api wasn't impacted (all the RGMII definitions remained
within range), this experience should be used to never to have to face
this kind of challenge again.

While it is possible for the phy drivers to use the enums directly,
drivers such as dp83867, dp83869, marvell, micrel_ksz90x1 etc use this
api.

Reported-by: Tom Rini 
Reviewed-by: Marek Vasut 
Reviewed-by: Marek Behún 
Signed-off-by: Nishanth Menon 
Reviewed-by: Ramon Fried

net: phy: Drop phy_interface_is_sgmii

2023-05-05T21:48:44+00:00

Recent commit 75d28899e3e9 ("net: phy: Synchronize PHY interface modes
with Linux") reordered the enum definitions. This caused the range of
enums that this api was checking to go bad.

There aren't anymore users of phy_interface_is_sgmii, so, just drop
it. Also the protocols are so very different that it makes no sense to
provide a helper wrapper in the hope of reuse for phy drivers.

Reported-by: Tom Rini 
Suggested-by: Marek Vasut 
Suggested-by: Marek Behún 
Link: https://lore.kernel.org/all/20230414103852.38705065@dellmb/
Signed-off-by: Nishanth Menon 
Reviewed-by: Ramon Fried

net: phy: Add phy_read_mmd_poll_timeout() from Linux

2023-04-07T12:21:37+00:00

Add phy_read_mmd_poll_timeout() from Linux 5.7.y as of commit
bd971ff0b7392 ("net: phy: introduce phy_read_mmd_poll_timeout macro")
This is used by the upcoming Marvell 10G PHY driver.

Signed-off-by: Marek Vasut 
Reviewed-by: Ramon Fried