u-boot.git/include/power, branch v2015.10-rc2

Add missing part of: "power: pmic: pfuze100 support driver model"

2015-08-14T14:53:02+00:00

This part of mentioned commit, was missed by my mistake during the rebase.
Signed-off-by: Przemyslaw Marczak 

Original commit message:
power: pmic: pfuze100 support driver model

1. Support driver model for pfuze100.
2. Introduce a new Kconfig entry DM_PMIC_PFUZE100 for pfuze100
3. This driver intends to support PF100, PF200 and PF3000, so add
   the device id into the udevice_id array.
4. Rename PMIC_NUM_OF_REGS macro to PFUZE100_NUM_OF_REGS.

Change-Id: I4fc88414f3c0285f9648e47ec7aed60addeccc4d
Signed-off-by: Peng Fan 
Cc: Przemyslaw Marczak 
Cc: Simon Glass 
Reviewed-by: Simon Glass

pmic: pmic_hi6553: Add a driver for the hi6553 pmic found on hikey board.

2015-08-13T00:48:00+00:00

This adds a simple pmic driver for the hi6553 pmic which is used in
conjunction with the hi6220 SoC on the hikey board. Eventually this
driver will be updated to be a proper UCLASS PMIC driver which
can parse the voltages direct from device tree.

Signed-off-by: Peter Griffin

power: regulator: add pfuze100 support

2015-08-12T09:04:58+00:00

1. Add new regulator driver pfuze100.
   * Introduce struct pfuze100_regulator_desc for maintaining info
     for one regulator.
2. Add new Kconfig entry DM_REGULATOR_PFUZE100 for pfuze100.
3. This driver intends to support PF100, PF200 and PF3000.
4. Add related macro definition in pfuze header file.

Signed-off-by: Peng Fan 
Cc: Przemyslaw Marczak 
Cc: Simon Glass

power: regulator: update comments for regulator-name

2015-08-12T08:03:04+00:00

We do not need that "regulator-name" property must be provided in dts.
If "regulator-name" property is not provided in dts, node name
will chosen for settings '.name' field of uc_pdata.

Signed-off-by: Peng Fan 
Cc: Przemyslaw Marczak 
Cc: Simon Glass

power: pfuze100 correct SWBST macro definition

2015-08-12T08:02:26+00:00

According to datasheet, SWBST_MODE starts from bit 2 and it occupies 2 bits.
So SWBST_MODE_MASK should be 0xC, and SWBST_MODE_xx should be ([mode] << 2).

Signed-off-by: Peng Fan 
Cc: Przemyslaw Marczak 
Cc: Stefano Babic 
Reviewed-by: Simon Glass

power: Remove old TPS65090 drivers

2015-08-06T03:06:16+00:00

Remove the old drivers (both the normal one and the cros_ec one) now that
we have new drivers that use driver model.

Signed-off-by: Simon Glass

dm: power: Add support for the S5M8767 PMIC

2015-08-06T03:06:12+00:00

This PMIC is used with SoCs which need a combination of BUCKs and LDOs. The
driver supports probing and basic register access. It supports the standard
device tree binding and supports driver model. A regulator driver can be
provided also.

Signed-off-by: Simon Glass 
Acked-by: Przemyslaw Marczak

dm: power: Add a new driver for the TPS65090 PMIC

2015-08-06T03:06:12+00:00

The existing TPS65090 driver does not support driver model. Add a new one
that does. This can be used as a base for a regulator driver also. It uses
the standard device tree binding.

Signed-off-by: Simon Glass 
Acked-by: Przemyslaw Marczak

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

2015-08-02T11:40:37+00:00

power: pmic: Add support for MAX77696 PMIC

2015-07-26T10:11:33+00:00

Add support for MAX77696 PMIC.

Signed-off-by: Fabio Estevam