u-boot.git/include/ppc_asm.tmpl, branch v2017.07-rc2

powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512x

2017-06-16T14:14:55+00:00

There was for long time no activity in the mpx5xxx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in mpc5xxx,
so remove it.

Signed-off-by: Heiko Schocher

powerpc, 5xx: remove support for 5xx

2017-06-12T12:38:05+00:00

There was for long time no activity in the 5xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 5xx,
so remove it.

Signed-off-by: Heiko Schocher

powerpc, 8260: remove support for mpc8260

2017-06-12T12:38:02+00:00

There was for long time no activity in the 8260 area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 8260,
so remove it.

Signed-off-by: Heiko Schocher

powerpc, 8xx: remove support for 8xx

2017-06-12T12:37:55+00:00

There was for long time no activity in the 8xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 8xx,
so remove it (with a heavy heart, knowing that I remove
here the root of U-Boot).

Signed-off-by: Heiko Schocher

powerpc: mpc85xx: Enable pre-relocation malloc for MPC85xx

2016-04-08T22:42:10+00:00

To enable DM on MPC85xx, we need pre-relocation malloc, which is
implemented in this patch.

We also make sure that the IVORs are always 4-aligned on e500 to prevent
alignment exceptions caused by code changes in start.S.

Signed-off-by: Mario Six 
Cc: York Sun 
Cc: Simon Glass 
Reviewed-by: York Sun

powerpc/mpc85xx: Don't relocate exception vectors

2015-04-20T17:15:29+00:00

Booke does not require exception vectors to be located at address zero.
U-Boot was doing so anyway, simply because that's how it had been done
on other PPC.  The downside of this is that once the OS is loaded to
address zero, the exception vectors have been overwritten -- which
makes it difficult to diagnose a crash that happens after that point.

The IVOR setup and trap entry code is simplified somewhat as a result.

Also, there is no longer a need to align individual exceptions on 0x100
byte boundaries.

Signed-off-by: Scott Wood 
Reviewed-by: York Sun

powerpc: mpc824x: remove MPC824X cpu support

2015-01-05T17:08:55+00:00

All the MPC824X boards are still non-generic boards:
A3000, CPC45, CU824, eXalion, MVBLUE, MUSENKI, Sandpoint824x, utx8245

Signed-off-by: Masahiro Yamada 
Cc: Wolfgang Denk 
Cc: Josef Wagner 
Cc: Torsten Demke 
Cc: Jim Thompson 
Cc: Greg Allen

powerpc: mpc8260: consolidate CONFIG_MPC8260 and CONFIG_8260

2014-03-07T15:59:06+00:00

Before this commit, CONFIG_MPC8260 and CONFIG_8260
were used mixed-up.

All boards with mpc8260 cpu defined both of them:
  - CONFIG_MPC8260 was defined in board config headers
      and include/common.h
  - CONFIG_8260 was defined arch/powerpc/cpu/mpc8260/config.mk

We do not need to have both of them.
This commit keeps only CONFIG_MPC8260.

This commit does:
 - Delete CONFIG_8260 and CONFIG_MPC8260 definition
   in config headers and include/common.h
 - Rename CONFIG_8260 to CONFIG_MPC8260
    in arch/powerpc/cpu/mpc8260/config.mk.
 - Rename #ifdef CONFIG_8260 to #ifdef CONFIG_MPC8260

Signed-off-by: Masahiro Yamada 
Cc: Wolfgang Denk

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38+00:00

Signed-off-by: Wolfgang Denk 
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini

Power: remove support for Freescale MPC8220

2013-05-15T12:41:03+00:00

The Freescale MPC8220 Power Architecture processors have long reached
EOL; Freescale does not even list these any more on their web site.

Remove the code to avoid wasting maitaining efforts on dead stuff.

Signed-off-by: Wolfgang Denk 
Cc: Andy Fleming