u-boot.git/include/serial.h, branch u-boot-2013.01.y

serial: Implement default_serial_puts()

2012-10-17T14:55:50+00:00

U-Boot contains a lot of duplicit implementations of serial_puts()
call which just pipes single characters into the port in loop. Implement
function that does this behavior into common code, so others can make
easy use of it.

This function is called default_serial_puts() and it's sole purpose
is to call putc() in loop on the whole string passed to it.

Signed-off-by: Marek Vasut 
Cc: Marek Vasut 
Cc: Tom Rini

serial: Remove CONFIG_SERIAL_MULTI from remaining sources

2012-10-15T18:53:59+00:00

Remove the parts depending either on disabled CONFIG_SERIAL_MULTI
or ifdefs around CONFIG_SERIAL_MULTI parts since CONFIG_SERIAL_MULTI
is now enabled by default.

Signed-off-by: Marek Vasut 
Cc: Marek Vasut 
Cc: Tom Rini 
Cc: Anatolij Gustschin 
Cc: Stefan Roese

serial: zoom2: Remove zoom2 serial prototypes from serial.h

2012-10-15T18:53:50+00:00

Remove the prototypes for zoom2_serial_deviceN from serial.h . This
can't be done right away, as they are referenced from the zoom2
config file. Therefore, adjust the code so the config file only
specifies number of the port. Then, replace the simple return in
default_serial_console() with a switch across possible values, which
returns the zoom2_serial_deviceN . With such adjustment in place,
the exported prototypes in serial.h can be safely removed.

Signed-off-by: Marek Vasut 
Cc: Marek Vasut 
Cc: Tom Rini

serial: bfin: Adjust serial_register_bfin_uart()

2012-10-15T18:53:50+00:00

Rename the serial_register_bfin_uart() to bfin_initialize_serial()
to be consistent with the rest of the naming. Next, remove it's
prototype from serial.h and properly insert it into serial.c as
the rest of the serial initialization functions.

Signed-off-by: Marek Vasut 
Cc: Marek Vasut 
Cc: Tom Rini 
Cc: Mike Frysinger

serial: bfin: Remove the bfin_serialN_device exports from serial.h

2012-10-15T18:53:50+00:00

Remove the exports from serial.h as they are only used in the blackfin
serial driver. Furthermore, they are only used for registration, which
is handled already inside that driver and default_serial_port() call,
which is also handled in that driver.

Signed-off-by: Marek Vasut 
Cc: Marek Vasut 
Cc: Tom Rini 
Cc: Mike Frysinger

serial: ns16550: Move serial registration from serial_initialize()

2012-10-15T18:53:50+00:00

Move the registration of eserialN_device ports from default
serial_initialize() into driver specific function called from
serial_initialize(). This slims down the serial_initialize() call
to a bare tracker of all possible serial port registration routines
in U-Boot.

The newly implemented ns16550_serial_initialize() function, which is
implemented inside of the ns16550 serial driver allows encapsulation
of eserialN_device within the ns16550 serial driver itself.

Also, remove the exports of eserialN_device from include/serial.h
as they are no longer needed. This is simply because the implementation of
default_serial_console() is wrapped into the ns16550 serial driver and
the default console is picked by CONFIG_SERIAL macro in config file.

Signed-off-by: Marek Vasut 
Cc: Marek Vasut 
Cc: Tom Rini 
Cc: Anatolij Gustschin 
Cc: Stefan Roese 
Cc: Mike Frysinger 
Cc: Michal Simek

serial: mpc512x: Move serial registration from serial_initialize()

2012-10-15T18:53:50+00:00

Move the registration of serialN_device ports from default
serial_initialize() into driver specific function called from
serial_initialize(). This slims down the serial_initialize() call
to a bare tracker of all possible serial port registration routines
in U-Boot.

The newly implemented mpc512x_serial_initialize() function, which is
implemented inside of the mpc512x serial driver allows encapsulation
of serialN_device within the mpc512x serial driver itself.

Also, remove the exports of serialN_device from include/serial.h
as they are no longer needed. This is simply because the implementation of
default_serial_console() is wrapped into the mpx512x serial driver and
the default console is picked by CONFIG_SERIAL macro in config file.

Signed-off-by: Marek Vasut 
Cc: Marek Vasut 
Cc: Tom Rini 
Cc: Anatolij Gustschin 
Cc: Stefan Roese

serial: microblaze: Move serial registration from serial_initialize()

2012-10-15T18:53:50+00:00

Move the registration of xuartlite_serialN_device ports from
default serial_initialize() into driver specific function called from
serial_initialize(). This slims down the serial_initialize() call
to a bare tracker of all possible serial port registration routines
in U-Boot.

The newly implemented xuartlite_serial_initialize() function, which is
implemented inside of the serial_xuartlite driver allows encapsulation
of xuartlite_serialN_device within the serial_xuartlite driver itself.

Also, remove the exports of xuartlite_serialN_device from include/serial.h
as they are no longer needed. This is simply because the implementation of
default_serial_console() is wrapped into the serial_xuartlite driver and
the default console is picked by CONFIG_SERIAL macro in config file.

Signed-off-by: Marek Vasut 
Cc: Marek Vasut 
Cc: Tom Rini 
Cc: Michal Simek

serial: zynq: Move serial registration from serial_initialize()

2012-10-15T18:53:49+00:00

Move the registration of zynq_serialN_device ports from default
serial_initialize() into driver specific function called from
serial_initialize(). This slims down the serial_initialize() call
to a bare tracker of all possible serial port registration routines
in U-Boot.

The newly implemented zynq_serial_initialize() function, which is
implemented inside of the serial_zynq driver allows encapsulation
of zynq_serialN_device within the serial_zynq driver itself.

Also, remove the exports of zynq_serialN_device from include/serial.h
as they are no longer needed. This is simply because the implementation of
default_serial_console() is wrapped into the serial_zynq driver and
the default console is picked by CONFIG_SERIAL macro in config file.

Signed-off-by: Tom Rini

serial: s5p: Move serial registration from serial_initialize()

2012-10-15T18:53:49+00:00

Move the registration of s5p_serialN_device ports from default
serial_initialize() into driver specific function called from
serial_initialize(). This slims down the serial_initialize() call
to a bare tracker of all possible serial port registration routines
in U-Boot.

The newly implemented s5p_serial_initialize() function, which is
implemented inside of the serial_s5p driver allows encapsulation
of s5p_serialN_device within the serial_s5p driver itself.

Also, remove the exports of s5p_serialN_device from include/serial.h
as they are no longer needed. This is simply because the implementation of
default_serial_console() is wrapped into the serial_s5p driver and
the default console is picked by CONFIG_SERIAL macro in config file.

Signed-off-by: Marek Vasut 
Cc: Marek Vasut 
Cc: Tom Rini 
Cc: Minkyu Kang