u-boot.git/include/serial.h, branch v2010.06

x86: Use CONFIG_SERIAL_MULTI

2010-05-05T22:16:46+00:00

Signed-off-by: Graeme Russ

SAMSUNG: serial: modify name from s5pc1xx to s5p

2010-04-30T10:23:23+00:00

Because of other s5p series SoC will use these serial functions,
modify function's name and structure's name.

Signed-off-by: Minkyu Kang

mpc5121: add PSC serial communication routines

2010-04-24T20:56:32+00:00

Signed-off-by: Anatolij Gustschin

mpc512x: add multi serial PSC support

2010-04-24T20:56:30+00:00

Extend mpc512x serial driver to support multiple PSC ports.

Subsequent patches for PDM360NG board support make use of this
functionality by defining CONFIG_SERIAL_MULTI in the board config
file. Additionally the used PSC devices are specified by defining
e.g. CONFIG_SYS_PSC1, CONFIG_SYS_PSC4 and CONFIG_SYS_PSC6.

Support for PSC devices other than 1, 3, 4 and 6 is not added
by this patch because these aren't used currently. In the future
it can be easily added using DECLARE_PSC_SERIAL_FUNCTIONS(N) and
INIT_PSC_SERIAL_STRUCTURE(N) macros in cpu/mpc512x/serial.c.
Additionally you have to add code for registering added
devices in serial_initialize() in common/serial.c.

Signed-off-by: Anatolij Gustschin

serial: struct serial_device: add uninit() entry for drivers

2010-04-24T19:34:07+00:00

Subsequent patch extends mpc512x serial driver to support
multiple PSC ports. The driver will provide an uninit()
function to stop the serial controller and to disable the
controller's clock. Adding uninit() entry to struct serial_device
allows disabling the serial controller after usage of
a stdio serial device.

This patch adds uninit() entry to the struct serial_device
and fixes initialization of this structure in the code
accordingly.

Signed-off-by: Anatolij Gustschin

OMAP3 zoom2 Use usbtty if the debug board is not connected.

2009-12-20T11:51:51+00:00

The preferred serial output comes from the debug board.
When the debug board is disconnected, fall back on using
usbtty from the usb connector on the Zoom2 board.

This shows up as /dev/ttyACM0 in a linux host.

Signed-off-by: Tom Rix

USBTTY make some function declarations easier to use.

2009-12-20T11:51:51+00:00

Zoom2 needs to use these declarations and the include directory is a
better place from them than in the middle of the driver directory.
It did not make sense to create a new file for just a couple of
lines so they were appended to the serial.h

Signed-off-by: Tom Rix

s5pc1xx: support serial driver

2009-10-14T02:13:55+00:00

This patch includes the serial driver for s5pc1xx.
s5pc1xx uart driver needs own register setting and clock configuration.
So, need to special driver.

Signed-off-by: Minkyu Kang

stdio/device: rework function naming convention

2009-07-17T22:27:46+00:00

So far the console API uses the following naming convention:

	======Extract======
	typedef struct device_t;

	int	device_register (device_t * dev);
	int	devices_init (void);
	int	device_deregister(char *devname);
	struct list_head* device_get_list(void);
	device_t* device_get_by_name(char* name);
	device_t* device_clone(device_t *dev);
	=======

which is too generic and confusing.

Instead of using device_XX and device_t we change this
into stdio_XX and stdio_dev

This will also allow to add later a generic device mechanism in order
to have support for multiple devices and driver instances.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD 

Edited commit message.

Signed-off-by: Wolfgang Denk

8xxx: Second UART port added for MPC85xx, MPC83xx, MPC86xx processors

2009-07-02T13:34:13+00:00

Defining the next two configs allows to switch the serial port from the
console using the setenv stdin and stdout
  1. #define CONFIG_SERIAL_MULTI 1 /* Enable both serial ports */
  2. #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */

Signed-off-by: Poonam Aggrwal 
Signed-off-by: Ed Swarthout 
Signed-off-by: Kumar Gala