RISC-V OpenSBI is an open-source implementation of the RISC-V Supervisor
Binary Interface (SBI) specification. It is required by Linux and U-Boot
running in supervisor mode. This patch adds support for booting via the
OpenSBI FW_DYNAMIC firmware. It supports OpenSBI version 0.4 and higher.
In this configuration, U-Boot SPL starts in machine mode. After loading
OpenSBI and U-Boot proper, it will start OpenSBI. All necessary
parameters are generated by U-Boot SPL and are passed to OpenSBI. U-Boot
proper is started in supervisor mode by OpenSBI. Support for OpenSBI is
enabled with CONFIG_SPL_OPENSBI. An additional configuration entry,
CONFIG_SPL_OPENSBI_LOAD_ADDR, is used to specify the load address of the
OpenSBI firmware binary. It is not used directly in U-Boot and instead
is intended to make the value available to scripts such as FIT
configuration generators.
The header file include/opensbi.h is based on header files from the
OpenSBI project. They are recent, as of commit bae54f764570 ("firmware:
Add fw_dynamic firmware").
Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The current U-Boot SPL image loader infrastructure is very powerful, able to initialize and load from a variety of boot media however it is strongly geared towards loading specific types of images in a very specific way. To address the need being able to use this infrastructure to load arbitrary image files go ahead and refactor it as follows: - Refactor existing spl_mmc_load_image function into superset function, accepting additional arguments such as filenames and media load offset (same concept can also be applied toother spl_XXX_load_image functions) - Extend the loader function to "remember" their peripheral initialization status so that the init is only done once during the boot process, - Extend the FIT image loading function to allow skipping the parsing/ processing of the FIT contents (so that this can be done separately in a more customized fashion) - Populate the SPL_LOAD_IMAGE_METHOD() list with a trampoline function, invoking the newly refactored superset functions in a way to maintain compatibility with the existing behavior This refactoring initially covers MMC/SD card loading (RAW and FS-based). Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
Set the spl_image->fdt_addr pointer both for simple fitImage configuration as well as full fitImage configuration, to let spl_perform_fixups() access the DT and perform modifications to it if necessary. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com>
SPL currently does not check uImage CRCs when loading U-Boot. This patch adds checking the uImage CRC when SPL loads U-Boot. It does this by reusing the existing config option SPL_CRC32_SUPPORT to allow leaving out the CRC check on boards where the additional code size or boot time is a problem (adding the CRC check currently adds ~1.4 kByte to flash). The SPL_CRC32_SUPPORT config option now gets enabled by default if SPL support for legacy images is enabled to check the CRC on all boards that don't actively take countermeasures. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Introduce function prototypes for board_spl_fit_size_align and board_spl_fit_post_load Signed-off-by: Peng Fan <peng.fan@nxp.com>
Introduce two board level callback functions to FIT image loading process, and a SPL_FIT_FOUND flag to differentiate FIT image or RAW image. Implement functions in imx common SPL codes to call HAB funtion to authenticate the FIT image. Generally, we have to sign multiple regions in FIT image: 1. Sign FIT FDT data (configuration) 2. Sign FIT external data (Sub-images) Because the CSF supports to sign multiple memory blocks, so that we can use one signature to cover all regions in FIT image and only authenticate once. The authentication should be done after the entire FIT image is loaded into memory including all sub-images. We use "-p" option to generate FIT image to reserve a space for FIT IVT and FIT CSF, also this help to fix the offset of the external data (u-boot-nodtb.bin, ATF, u-boot DTB). The signed FIT image layout is as below: -------------------------------------------------- | | | | | | | | | FIT | FIT | FIT | | U-BOOT | ATF | U-BOOT | | FDT | IVT | CSF | | nodtb.bin | | DTB | | | | | | | | | -------------------------------------------------- Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
commit d6330064634a ("spl: Add a define for SPL_TPL_PROMPT")
changes the SPL/TPL banner from upper case into lower
case. As SPL and TPL are three-letter acronyms and they
are written in upper case, change it back to upper case.
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
There is some basic informaton that SPL normally wants to pass through to U-Boot, such as the SDRAM size and bank information. Mkae use of the new bloblist structure for this. Add a new 'handoff' blob which is set up in SPL and passed to U-Boot proper. Also adda test for sandbox_spl that checks that this works correctly and a new 'sb' command to show the information passed from SPL. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Simon Glass <sjg@chromium.org>
We should use a macro rather than hard-coding the SPL prompt to 'spl'
since the code can be used by TPL too. Add a macro that works for both
and use it in various places.
This allows TPL to use the same code without printing confusing messages.
Note that the string is lower case ('spl', 'tpl') which is a change from
previously.
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
The bloblist is normally set up in SPL ready for use by U-Boot. Add a simple implementation of this to the common SPL code. Signed-off-by: Simon Glass <sjg@chromium.org>