u-boot.git/include/status_led.h, branch v2012.10

sbc82xx: delete support for obsolete SBC8240/SBC8260

2011-10-01T19:57:13+00:00

The EST SBC8260 is over 10 years old, and the SBC8240 older than
that.  With the tiny amount of RAM (by today's standards), there
really isn't anyone interested in running the latest U-boot on
these EOL products anymore.

Signed-off-by: Paul Gortmaker 
CC: jon.diekema@smiths-aerospace.com

led: remove camel casing of led identifiers globally

2011-09-13T06:30:52+00:00

Result of running the following command to address Wolfgang's
comment about camel case:

for file in `find . | grep '\.[chS]$'`; do perl -i -pe
's/(green|yellow|red|blue)_LED_(on|off)/$1_led_$2/g' $file; done

Discussion:
http://patchwork.ozlabs.org/patch/84988/

Signed-off-by: Jason Kridner 
Signed-off-by: Joel A Fernandes 
Signed-off-by: Sandeep Paulraj

CCM: remove code for yet another corpse

2010-10-06T20:22:26+00:00

The CCM board has long reached EOL, and support for it is no longer
relevant in current versions of U-Boot.  Remove it.

Signed-off-by: Wolfgang Denk

PCU_E: remove code for yet another corpse

2010-10-06T20:22:24+00:00

The PCU_E board has long reached EOL, and support for it is no longer
relevant in current versions of U-Boot.  Remove it.

Signed-off-by: Wolfgang Denk

Remove HMI10 board support

2010-09-19T19:28:25+00:00

Recent changes caused that the HMI10 board now is included in the
boards built by MAKEALL, which revealed that compilation for this
board has been broken for a long time:

ps2ser.c: In function 'ps2ser_init':
ps2ser.c:155: error: 'UART_LCR' undeclared (first use in this function)
ps2ser.c:155: error: (Each undeclared identifier is reported only once
ps2ser.c:155: error: for each function it appears in.)
ps2ser.c:156: error: 'UART_DLL' undeclared (first use in this function)
ps2ser.c:157: error: 'UART_DLM' undeclared (first use in this function)
ps2ser.c:159: error: 'UART_IER' undeclared (first use in this function)
ps2ser.c:160: error: 'UART_MCR' undeclared (first use in this function)
ps2ser.c:161: error: 'UART_FCR' undeclared (first use in this function)
ps2ser.c:162: error: 'UART_FCR_ENABLE_FIFO' undeclared (first use in this function)
ps2ser.c:166: error: 'UART_LSR' undeclared (first use in this function)
ps2ser.c: In function 'ps2ser_putc':
ps2ser.c:198: error: 'UART_LSR' undeclared (first use in this function)
ps2ser.c:200: error: 'UART_TX' undeclared (first use in this function)
ps2ser.c: In function 'ps2ser_getc_hw':
ps2ser.c:224: error: 'UART_LSR' undeclared (first use in this function)
ps2ser.c:225: error: 'UART_RX' undeclared (first use in this function)
ps2ser.c: In function 'ps2ser_interrupt':
ps2ser.c:293: error: 'UART_IIR' undeclared (first use in this function)

The board is orphaned, and AFAICT has reached EOL.
Drop support for it.

Signed-off-by: Wolfgang Denk

Blackfin: back out status_led.h stubs

2010-07-05T09:30:07+00:00

When boards define CONFIG_BOARD_SPECIFIC_LED, the common led definitions
are OK for Blackfin boards.  So switch the few boards using these over to
the common code.

Signed-off-by: Mike Frysinger

ARM Add blue colour LED to status_led.

2009-06-12T18:39:49+00:00

There is exiting support for red,yellow,green but no blue.
The main LED on the zoom2 is a blue LED.

Signed-off-by: Tom Rix

Blackfin: implement general support for CONFIG_STATUS_LED

2009-01-28T18:26:12+00:00

Here are the Blackfin-specific and board-independent pieces for status leds.

Signed-off-by: Mike Frysinger

rename CFG_ macros to CONFIG_SYS

2008-10-18T19:54:03+00:00

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD

Coding Style cleanup.

2007-10-13T19:15:39+00:00

Signed-off-by: Wolfgang Denk