u-boot.git/include/tsec.h, branch v2011.03

miiphy: convert to linux/mii.h

2011-01-09T17:06:50+00:00

The include/miiphy.h header duplicates a lot of things from linux/mii.h.
So punt all the things that overlap to keep the API simple and to make
merging between U-Boot and Linux simpler.

Signed-off-by: Mike Frysinger

tsec: Add TSEC_FIBER flag

2010-02-01T06:34:34+00:00

The TSEC_FIBER flag should be set when a PHY is operating with an
external fiber interface.  Currently it is only used to notify a user
that the PHY is operating in fiber mode.

A short description was also added to the other TSEC flag defines so
that it is clear how they differ from one another.

Signed-off-by: Peter Tyser 
Signed-off-by: Ben Warren

tsec: Add support for using the BCM5482 PHY in fiber mode

2010-02-01T06:34:34+00:00

The BCM5482 PHY supports both copper and fiber as an ethernet medium.
By enabling its copper/fiber mode auto-detection feature it can
dynamically determine if it should be configured for copper or fiber.

Signed-off-by: Peter Tyser 
Signed-off-by: Ben Warren

tsec: Make functions/data static when possible

2010-02-01T06:34:34+00:00

This is generally good practice and saves ~150 bytes.

Signed-off-by: Peter Tyser 
Signed-off-by: Ben Warren

NET: Base support for etsec2.0

2010-01-05T19:49:04+00:00

1. Modified the tsec_mdio structure to include the new regs
2. Modified the MDIO_BASE_ADDR so that it will handle both
older version and new version of etsec.

Signed-off-by: Sandeep Gopalpet 
Acked-by: Kim Phillips 
Signed-off-by: Kumar Gala

NET: Move MDIO regs out of TSEC Space

2010-01-05T19:49:04+00:00

Moved the mdio regs out of the tsec structure,and
provided different offsets for tsec base and mdio
base so that provision for etsec2.0 can be provided.

This patch helps in providing the support for etsec2.0
In etsec2.0, the MDIO register space and the etsec reg
space are different.

Also, moved the TSEC_BASE_ADDR and MDIO_BASE_ADDR definitons into
platform specific files.

Signed-off-by: Sandeep Gopalpet 
Acked-by: Kim Phillips 
Signed-off-by: Kumar Gala

tsec: Add support for BCM5482S PHY

2009-06-15T07:13:54+00:00

Signed-off-by: Zach LeRoy 
Acked-by: Kumar Gala 
Signed-off-by: Ben Warren

83xx: Replace CONFIG_MPC83XX with CONFIG_MPC83xx

2009-06-12T18:47:17+00:00

Use the standard lowercase "xx" capitalization that other Freescale
architectures use for CPU defines to prevent confusion and errors

Signed-off-by: Peter Tyser 
Signed-off-by: Kim Phillips

net: tsec: Fix Marvell 88E1121R phy init

2008-12-05T06:51:54+00:00

This patch tries to ensure that phy interrupt pin
won't be asserted after booting. We experienced
following issues with current 88E1121R phy init:

Marvell 88E1121R phy can be hardware-configured
to share MDC/MDIO and interrupt pins for both ports
P0 and P1 (e.g. as configured on socrates board).
Port 0 interrupt pin will be shared by both ports
in such configuration. After booting Linux and
configuring eth0 interface, port 0 phy interrupts
are enabled. After rebooting without proper eth0
interface shutdown port 0 phy interrupts remain
enabled so any change on port 0 (link status, etc.)
cause assertion of the interrupt. Now booting Linux
and configuring eth1 interface will cause permanent
phy interrupt storm as the registered phy 1 interrupt
handler doesn't acknowledge phy 0 interrupts. This
of course should be fixed in Linux driver too.

Signed-off-by: Anatolij Gustschin 
Acked-by: Andy Fleming 
Signed-off-by: Ben Warren

rename CFG_ macros to CONFIG_SYS

2008-10-18T19:54:03+00:00

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD