u-boot.git/include/usb.h, branch v2013.01

usb: Clean up newly allocated device nodes in case of configuration failure

2012-12-17T14:38:15+00:00

If probe of a newly connected device fails for some reason, clean up
the allocated entry in usb_dev array.

Signed-off-by: Milind Choudhary 
Signed-off-by: Simon Glass

musb-new: omap2plus backend driver

2012-11-19T23:16:08+00:00

Backend driver for MUSB OTG controllers found on TI OMAP2/3/4
(tested only on OMAP3 Beagle).

Signed-off-by: Ilya Yanok

musb-new: am35x backend driver

2012-11-19T23:16:07+00:00

Backend driver for MUSB OTG controllers found on TI AM35x.

It seems that on AM35X interrupt status registers can be updated
_before_ core registers. As we don't use true interrupts in U-Boot
and poll interrupt status registers instead this can result in
interrupt handler being called with non-updated core registers.
This confuses the code and result in hanged transfers.
Add a small delay in am35x_interrupt as a workaround.

Signed-off-by: Ilya Yanok

musb-new: dsps backend driver

2012-11-19T23:16:06+00:00

Backend driver for MUSB OTG controllers found on TI AM33xx and
TI81xx SoCs (tested with AM33xx only).

Signed-off-by: Ilya Yanok

usb: use linux/usb/ch9.h instead of usbdescriptors.h

2012-11-19T23:16:06+00:00

Linux usb/ch9.h seems to have all the same information (and more)
as usbdescriptors.h so use the former instead of the later one.

As a consequense of this change USB_SPEED_* values don't correspond
directly to EHCI speed encoding anymore, I've added necessary
recoding in EHCI driver. Also there is no point to put speed into
pipe anymore so it's removed and a bunch of host drivers fixed to
look at usb_device->speed instead.

Old usbdescriptors.h included is not removed as it seems to be
used by old USB device code.

This makes usb.h and usbdevice.h incompatible. Fortunately the
only place that tries to include both are the old MUSB code and
it needs usb.h only for USB_DMA_MINALIGN used in aligned attribute
on musb_regs structure but this attribute seems to be unneeded
(old MUSB code doesn't support any DMA at all).

Signed-off-by: Ilya Yanok

usb.h: Add udc_disconnect prototype to usb.h

2012-10-15T18:54:02+00:00

PXA25x gadget implements common function usb_disconnect().
This patch adds this function prototype into usb.h for boards using it.

Signed-off-by: Lukasz Dalek

usb: lowlevel interface change to support multiple controllers

2012-10-15T18:54:00+00:00

Carry an index in the lowlevel usb functions to make specify the
respective usb controller.

Also pass through an controller struct from lowlevel_init to the
creation of the root usb device of this controller.

Signed-off-by: Lucas Stach 
Reviewed-by: Marek Vasut

ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment

2012-07-18T12:43:29+00:00

The USB spec says that 32 bytes is the minimum required alignment.
However on some platforms we have a larger minimum requirement for cache
coherency.  In those cases, use that value rather than the USB spec
minimum.  We add a cpp check to  to define USB_DMA_MINALIGN and
make use of it in ehci-hcd.c and musb_core.h.  We cannot use MAX() here
as we are not allowed to have tests inside of align(...).

Signed-off-by: Tom Rini 
[marek.vasut]: introduce some crazy macro voodoo
Signed-off-by: Marek Vasut 
[ilya.yanok]: moved external buffer fixes to separate patch,
we use {ALLOC,DEFINE}_ALIGN_BUFFER macros with alignment of USB_DMA_MINALIGN
for qh_list, qh and qtd structures to make sure they are proper aligned
for both controller and cache operations.
Signed-off-by: Ilya Yanok

USB: Align buffers at cacheline

2012-05-20T06:32:32+00:00

This avoids cache-alignment warnings shown in console
when a usb command is entered.

Whenever X bytes of unaligned buffer is invalidated, arm core
invalidates X + Y bytes as per the cache line size and throws
these warnings.

Signed-off-by: Puneet Saxena 
Signed-off-by: Marek Vasut

usb: replace wait_ms() with mdelay()

2012-03-18T23:08:16+00:00

Common code has a mdelay() func, so use that instead of the usb-specific
wait_ms() func.  This also fixes the build errors:

ohci-hcd.c: In function 'submit_common_msg':
/usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available
ohci-hcd.c:1519:9: sorry, unimplemented: called from here
/usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available
ohci-hcd.c:1816:10: sorry, unimplemented: called from here
/usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available
ohci-hcd.c:1827:10: sorry, unimplemented: called from here
/usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available
ohci-hcd.c:1844:10: sorry, unimplemented: called from here
/usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available
ohci-hcd.c:1563:11: sorry, unimplemented: called from here
/usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available
ohci-hcd.c:1583:9: sorry, unimplemented: called from here
make[1]: *** [ohci-hcd.o] Error 1

Signed-off-by: Mike Frysinger 
Acked-by: Marek Vasut