u-boot.git/include, branch v2013.10-rc2

omap5: Correct include order, drop CONFIG_SYS_PROMPT define

2013-08-27T14:56:18+00:00

With the new include structure for TI platforms, we need to not define
our own CONFIG_SYS_PROMPT and also need to include
 much sooner, so do both of these.  Also drop
the unused CONFIG_NET_MULTI

Signed-off-by: Tom Rini

dfu, nand, ubi: add partubi alt settings for updating ubi partition

2013-08-26T19:56:34+00:00

updating an ubi partition needs a completely erased mtd partition,
see:
http://lists.infradead.org/pipermail/linux-mtd/2011-May/035416.html

So, add partubi alt setting for the dfu_alt_info environment
variable to mark this partition as an ubi partition. In case we
update an ubi partition, we erase after flashing the image into the
partition, the remaining sektors.

Signed-off-by: Heiko Schocher 
Cc: Pantelis Antoniou 
Cc: Tom Rini 
Cc: Lukasz Majewski 
Cc: Kyungmin Park 
Cc: Marek Vasut 
Cc: Wolfgang Denk 
Cc: Scott Wood

ARM: OMAP5-uevm: Add USB ehci support for the uEVM

2013-08-26T19:56:31+00:00

Add the USB ehci support for the OMAP5 uEVM.

Configure the uEVM mux data
Add the flags to build the appropriate modules
Add the usb call backs to initialize the EHCI controller

Signed-off-by: Dan Murphy

Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

2013-08-21T20:27:47+00:00

powerpc: Fix CamelCase checkpatch warnings

2013-08-20T16:57:51+00:00

85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions.
because of this code checkpatch script generates "WARNING: Avoid CamelCase".

Convert variables name to normal naming convention and modify board, driver
files with updated the new structure.

Signed-off-by: Prabhakar Kushwaha 
Acked-by: York Sun

powerpc: p1022ds: add TPL for p1022ds nand boot

2013-08-20T16:57:51+00:00

TPL is introduced in the patch "NAND: TPL : introduce the TPL
based on the SPL", here enable TPL for p1022ds nand boot.

Signed-off-by: Ying Zhang 
Acked-by: York Sun

powerpc : p1022ds : Enable p1022ds to start from eSPI with SPL

2013-08-20T16:47:59+00:00

Enable p1022ds to start from eSPI with SPL.

Signed-off-by: Ying Zhang 
Acked-by: York Sun

powerpc: p1022ds: Enable P1022DS to boot from SD Card with SPL

2013-08-20T16:47:38+00:00

Enable p1022ds to start from eSDHC with SPL.

Signed-off-by: Ying Zhang 
Acked-by: York Sun

powerpc: mpc85xx: Support booting from SD Card with SPL

2013-08-20T16:47:26+00:00

The code from the internal on-chip ROM. It loads the final uboot image
into DDR, then jump to it to begin execution.

The SPL's size is sizeable, the maximum size must not exceed the size of L2
SRAM. It initializes the DDR through SPD code, and copys final uboot image
to DDR. So there are two stage uboot images:
	* spl_boot, 96KB size. The env variables are copied to L2 SRAM, so that
	ddr spd code can get the interleaving mode setting in env. It loads
	final uboot image from offset 96KB.
	* final uboot image, size is variable depends on the functions enabled.

Signed-off-by: Ying Zhang 
Acked-by: York Sun

powerpc: deleted unused symbol CONFIG_SPL_NAND_MINIMAL and enabled some functionality for common SPL

2013-08-20T16:47:15+00:00

1. The symbol CONFIG_SPL_NAND_MINIMAL is unused, so deleted it.
2. Some functions were unused in the minimal SPL, but it is useful
in the common SPL. So, enabled some functionality for common SPL.

Signed-off-by: Ying Zhang 
Acked-by: York Sun