u-boot.git/include, branch v2014.10-rc2

Merge git://git.denx.de/u-boot-usb

2014-09-02T20:37:57+00:00

dfu: Provide means to find difference between dfu-util -e and -R

2014-09-02T12:29:28+00:00

This commit provides distinction between DFU device detach and reset.
The -R behavior is preserved with proper handling of the dfu-util's -e
switch, which detach the DFU device.

By running dfu-util -e; one can force device to finish the execution of
dfu command on target and execute some other scripted commands.

Moreover, some naming has been changed - the dfu_reset() method now is known
as dfu_detach(). New name better reflects the purpose of the code.

It was also necessary to increase the number of usb_gadget_handle_interrupts()
calls since we also must wait for detection of the USB reset event.

Example usage:
1. -e (detach) switch
 dfu-util -a0 -D file1.bin;dfu-util -a3 -D uImage;dfu-util -e

 access to u-boot prompt.

2. -R (reset) switch
 dfu-util -a0 -D file1.bin;dfu-util -R -a3 -D uImage

 target board reset

Signed-off-by: Lukasz Majewski 
Reviewed-by: Stephen Warren 
Tested-by: Stephen Warren

dm: gpio: Enhance gpio command to show only active GPIOs

2014-09-01T05:21:06+00:00

The GPIO list is very long in many cases and most of them are not used.
By default, show only the GPIOs that are in use, and provide a flag to show
all of them. This makes the 'gpio status' command much more pleasant.

In order to do this, driver model now exposes a method for obtaining the
'function' of a GPIO, which describes whether it is an input or output, for
example. Implementation of this method is optional.

Signed-off-by: Simon Glass

Merge branch 'master' of git://git.denx.de/u-boot-nios

2014-08-31T11:45:55+00:00

nomadik: kconfig: move board select menu and common settings

2014-08-31T01:22:00+00:00

Becuase the board select menu in arch/arm/Kconfig is too big,
move the Nomadik board select menu to nomadik/Kconfig.

Move also common settings (CONFIG_SYS_CPU="arm926ejs" and
CONFIG_SYS_SOC="nomadik").

Signed-off-by: Masahiro Yamada

orion5x: kconfig: move board select menu and common settings

2014-08-31T01:21:59+00:00

Becuase the board select menu in arch/arm/Kconfig is too big,
move the Orion5x board select menu to orion5x/Kconfig.

Move also common settings (CONFIG_SYS_CPU="arm926ejs" and
CONFIG_SYS_SOC="orion5x").

Signed-off-by: Masahiro Yamada 
Cc: Albert ARIBAUD

omap5: kconfig: move board select menu and common settings

2014-08-31T01:21:59+00:00

Becuase the board select menu in arch/arm/Kconfig is too big,
move the OMAP5 board select menu to omap5/Kconfig.

Move also common settings (CONFIG_SYS_CPU="armv7" and
CONFIG_SYS_SOC="omap5").

Signed-off-by: Masahiro Yamada 
Reviewed-by: Tom Rini 
Cc: Lokesh Vutla

omap4: kconfig: move board select menu and common settings

2014-08-31T01:21:59+00:00

Becuase the board select menu in arch/arm/Kconfig is too big,
move the OMAP4 board select menu to omap4/Kconfig.

Move also common settings (CONFIG_SYS_CPU="armv7" and
CONFIG_SYS_SOC="omap4").

Signed-off-by: Masahiro Yamada 
Reviewed-by: Tom Rini 
Cc: Lokesh Vutla

omap3: kconfig: move board select menu and common settings

2014-08-31T01:21:59+00:00

Becuase the board select menu in arch/arm/Kconfig is too big,
move the OMAP3 board select menu to omap3/Kconfig.

Move also common settings (CONFIG_SYS_CPU="armv7" and
CONFIG_SYS_SOC="omap3

Signed-off-by: Masahiro Yamada 
Reviewed-by: Tom Rini

kirkwood: kconfig: refactor Kconfig and defconfig

2014-08-31T01:21:21+00:00

Becuase the board select menu in arch/arm/Kconfig is too big,
move the KirkWood board select menu to kirkwood/Kconfig.

Consolidate also common settings (CONFIG_SYS_CPU="arm926ejs" and
CONFIG_SYS_SOC="kirkwood").

Signed-off-by: Masahiro Yamada 
Acked-by: Prafulla Wadasdkar 
Cc: Luka Perkov