u-boot.git/include, branch v2015.10-rc1

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

2015-08-02T11:40:37+00:00

imx: mx6ul_14x14_evk add basic board support

2015-08-02T09:05:09+00:00

1. Add USDHC, I2C, UART, 74LV, USB, QSPI support.
2. Support SPL
3. CONFIG_MX6UL_14X14_EVK_EMMC_REWORK is introduced, this board default
   supports sd for usdhc2, but can do hardware rework to make usdhc2 support
   emmc.

Boot Log:
U-Boot SPL 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59)
reading u-boot.img
reading u-boot.img

U-Boot 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59 +0800)

CPU:   Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz)
CPU:   Commercial temperature grade (0C to 95C)CPU:   Thermal invalid data, fuse: 0x0
 - invalid sensor device
 Reset cause: POR
 Board: MX6UL 14x14 EVK
 I2C:   ready
 DRAM:  512 MiB
 MMC:   FSL_SDHC: 0, FSL_SDHC: 1
 *** Warning - bad CRC, using default environment

 In:    serial
 Out:   serial
 Err:   serial
 Net:   CPU Net Initialization Failed
 No ethernet found.
 Hit any key to stop autoboot:  0

Signed-off-by: Peng Fan

imx: imx6_spl add mx6ul support

2015-08-02T09:05:09+00:00

i.MX6UL's DRAM space starts from 0x80000000, same to i.MX6SX, so use
same address with i.MX6SX.

Signed-off-by: Peng Fan

mx6_common: Fix LOADADDR and SYS_TEXT_BASE for i.MX6UL

2015-08-02T09:05:08+00:00

DRAM space starts from 0x80000000 for i.MX6UL, so need to
fix LOADADDR, SYS_TEXT_BASE.

Signed-off-by: Peng Fan

imx: mx6ul remove errata for i.MX6UL

2015-08-02T09:05:07+00:00

Since i.MX6UL use A7 core, but not A9 core, we do not need
the erratas for i.MX6UL.

Signed-off-by: Ye.Li 
Signed-off-by: Peng Fan

sf: kconfig: add kconfig options for spi flashes

2015-08-02T08:51:39+00:00

Add kconfig options for various SPI flashes and use them in cm-fx6 defconfig.

Cc: Jagan Teki 
Cc: Stefano Babic 
Cc: Igor Grinberg 
Signed-off-by: Nikita Kiryanov 
Acked-by: Igor Grinberg

usb: kconfig: usb keyboard kconfig

2015-08-02T08:51:39+00:00

Add Kconfig options for USB keyboard and use them for cm-fx6.

Cc: Marek Vasut 
Cc: Stefano Babic 
Cc: Igor Grinberg 
Signed-off-by: Nikita Kiryanov 
Acked-by: Igor Grinberg

arm: mx6: usb: kconfig: add USB_EHCI_MX6 kconfig option

2015-08-02T08:51:39+00:00

Add USB_EHCI_MX6 option to menuconfig and use it when migrating cm-fx6 usb
config to defconfig.

Cc: Masahiro Yamada 
Cc: Marek Vasut 
Cc: Stefano Babic 
Cc: Igor Grinberg 
Signed-off-by: Nikita Kiryanov 
Acked-by: Igor Grinberg

arm: mx6: cm-fx6: move CMD configs to defconfig

2015-08-02T08:51:37+00:00

Move CONFIG_CMD_* options that can be selected in menuconfig to cm-fx6
defconfig.

Cc: Stefano Babic 
Cc: Igor Grinberg 
Signed-off-by: Nikita Kiryanov 
Acked-by: Igor Grinberg

arm: mx6: cm-fx6: make it possible to not init display

2015-08-02T08:51:37+00:00

Implement a cm-fx6 specific board_video_skip() to provide the option to not
initialize the display.

The new function does not init display if the environment variable "panel" is
not defined, or if it is set to an unsupported value.

Collateral changes:
- Don't use the global displays array (it's CONFIG_IMX_VIDEO_SKIP specific).
- Don't use detect_hdmi(), since env controlled init makes it unnecessary.

Cc: Stefano Babic 
Cc: Igor Grinberg 
Signed-off-by: Nikita Kiryanov 
Signed-off-by: Igor Grinberg